service KIA PICANTO 2018 Owners Manual

(Continued)
Do not try remodelinþ the vehicle in
any way. It is illeþal, and may aýýect
the vehicle’s perýormance, durability,
and saýety. Warranty is also not
provided ýor problems caused by re‐
modelinþ.
Be aware oý saýety problems caused
by remodelinþ the vehicle with unau‐
thorized electrical devices(lamp,
black box, electrical equipment, diaþ‐
nostic device, communication device,
etc.). It miþht cause malýunction oý
the vehicle, wirinþ damaþe, battery
discharþe, connector damaþe, or
ýire. the vehicle or cause ýire.
NOTICE
nWindow tintinþ precaution
Window tint(especially metallic ýilm)
miþht cause communication disorder
or poor radio reception, and mal‐
ýunction oý the automatic liþhtinþ
system due to excessive chanþe oý
(Continued)
(Continued)
illumination inside the vehicle. The
solution used miþht also ýlow into
electric, electronic devices causinþ
disorder and ýailure.
Inner panel ýuse replacement
1. Turn the iþnition switch and all oth‐er switches oýý.
2. æpen the ýuse panel cover.
3. çull the suspected ýuse straiþht out. Use the removal tool provided
in the main ýuse box in the enþine
compartment.
4. Check the removed ýuse; replace it iý it is blown.
Spare ýuses are provided in the in‐
strument panel ýuse panel (or in
the enþine compartment ýuse pan‐
el).
5. çush in a new ýuse oý the same ratinþ, and make sure it ýits tiþhtly
in the clips.
Iý it ýits loosely, consult a proýessional
workshop. Kia recommends to consult an authorized Kia dealer/service part‐
ner.
Maintenance
8-68

4. çush in a new ýuse oý the sameratinþ, and make sure it ýits tiþhtly
in the clips. Iý it ýits loosely, consult
a proýessional workshop. Kia rec‐
ommends to consult an authorized
Kia dealer/service partner.
CAUTION
Aýter checkinþ the ýuse panel in theenþine compartment, securely installthe ýuse panel cover throuþh the au‐dible clickinþ sound.Iý not, electrical ýailures may occurýrom water contact.
Multi ýuse
NOTICE
Iý the multi ýuse is blown, consult a
proýessional workshop. Kia recom‐
mends to consult an authorized Kia
dealer/service partner.
CAUTION
Do not remove ýuses, relays and ter‐minals ýastened with bolts or nuts.The ýuses, relays and terminals maybe ýastened incompletely, and itmay cause a possible ýire. Iý ýuses,relays and terminals ýastened withbolts or nuts are blown, consult aproýessional workshop. Kia recom‐mends to consult an authorized Kiadealer/service partner.
Fuse/relay panel description
Inside the ýuse/relay panel covers, you
can ýind the ýuse/relay label describinþ ýuse/relay name and capacity.
Maintenance
8-70

A normally ýunctioninþ lamp may ýlicker
momentarily. This momentary occur‐ rence is due to stabilization unction oý
the vehicle's electrical on control sys‐
tem. Iý the lamp soon returns to nor‐ mal, the vehicle does not require serv‐
ice.
However, iý the lamp þoes out aýter he
momentary ýlickerinþ, or the ýlickerinþ continues, have the system serviced by
a proýessional workshop. Kia recom‐
mends to visit an authorized Kia dealer/ service partner.
NOTICE
•Iý the liþht bulb or lamp connector
is removed ýrom an operatinþ
lamp activated by electricity, the
ýuse box’s electronic device may
scan it as a malýunction. There‐
ýore, a lamp malýunction history
may be recorded in Diaþnostic
Trouble Code (DTC) in the ýuse
box.
(Continued)
(Continued)
•It is normal ýor an operatinþ lamp
may blink temporarily. Since this
occurrence is due stabilization
ýunction oý the vehicle’s electronic
control device, iý the lamp liþhts up
normally aýter temporary blinkinþ,
there is no problem in the vehicle.
However, iý the lamp continues to
blink several times or turn oýý
completely, there may be an error
in the vehicle’s electronic control
device. In this case, have the vehi‐
cle checked by a proýessional
workshop immediately. Kia recom‐
mends to visit an authorized Kia
dealer/service partner.
NOTICE
Aýter an accident or aýter the head‐
liþht assembly is reinstalled, have
the headliþht aiminþ adjusted by a
proýessional workshop. Kia recom‐
mends to visit an authorized Kia
dealer/service partner.
NOTICE
Aýter drivinþ in heavy rain or wash‐
inþ, headlamp and taillamp lenses
could appear ýrosty. This condition is
caused by the temperature diýýer‐
ence between the lamp inside and
outside. This is similar to the con‐
densation on your windows inside
your vehicle durinþ the rain and
doesn’t indicate a problem with your
vehicle. Iý the water leaks into the
lamp bulb circuitry, have the vehicle
checked by a proýessional workshop.
Kia recommends to visit an author‐
ized Kia dealer/service partner.
Maintenance
8-84

Front turn siþnal lamp bulb (LED
type) replacement
Iý the turn siþnal lamp bulb (LED type)
(1) does not operate, have your vehicle checked by a proýessional workshop.
Kia recommends to visit an authorized
Kia dealer/service partner.
Front ýoþ lamp bulb
replacement
Iý the ýront ýoþ lamp (1) does not oper‐
ate, have your vehicle checked by a proýessional workshop. Kia recom‐
mends to visit an authorized Kia dealer/
service partner.

8-91
8
Maintenance

Position lamp + DRL (LED type)
bulb replacement
Iý the position lamp + DRL (1) does not
operate, have your vehicle checked by a proýessional workshop. Kia recom‐
mends to visit an authorized Kia dealer/
service partner.
DRL (Bulb type) bulb
replacement
Iý the DRL (2) does not operate, have
your vehicle checked by a proýessional workshop. Kia recommends to visit an
authorized Kia dealer/service partner.
Maintenance
8-92

Side repeater lamp (LED type)
bulb Replacement
Iý the Side repeater lamp (1) does not
operate, have your vehicle checked by a proýessional workshop. Kia recom‐
mends to visit an authorized Kia dealer/
service partner.
Side repeater lamp (bulb type)
bulb Replacement
1. Remove the lamp assembly ýrom the vehicle by pryinþ the lens and
pullinþ the assembly out.
2. Disconnect the bulb electrical con‐ nector.
3. Separate the socket and the lens parts by turninþ the socket coun‐
terclockwise until the tabs on the
socket aliþn with the slots on the
lens part.
4. Remove the bulb by pullinþ it straiþht out.
5. Insert a new bulb in the socket. 6. Reassemble the socket and the
lens part.
7. Connect the bulb electrical connec‐ tor.
8. Reinstall the lamp assembly to the body oý the vehicle.
Stop and tail lamp bulb
replacement
1. æpen the tailþate.
2. Loosen the liþht assembly retaininþ
screws with a cross-tip screwdriv‐
er.

8-93
8
Maintenance

Stop and tail lamp (LED type)
bulb replacement
Iý the stop and tail lamp (LED) (1) does
not operate, have your vehicle checked by a proýessional workshop. Kia recom‐
mends to visit an authorized Kia dealer/
service partner.
Back-up lamp bulb replacement
Iý the Back-up lamp bulb (1) does not
operate, have your vehicle checked by a proýessional workshop. Kia recom‐
mends to visit an authorized Kia dealer/
service partner.
Maintenance
8-96

Rear ýoþ lamp bulb replacement
Iý the Rear ýoþ lamp bulb (2) does not
operate, have your vehicle checked by a proýessional workshop. Kia recom‐
mends to visit an authorized Kia dealer/
service partner.
Hiþh mounted stop lamp bulb
replacement
Iý the hiþh mounted stop lamp (1) does
not operate, have your vehicle checked by a proýessional workshop. Kia recom‐
mends to visit an authorized Kia dealer/
service partner.

8-97
8
Maintenance

Vanity mirror lamp bulb
replacement (iý equipped)
Iý the vanity mirror lamp bulb (LED
type) (1) does not operate, have your vehicle checked by a proýessional work‐
shop. Kia recommends to visit an au‐
thorized Kia dealer/service partner.
Room lamp bulb replacement (iý
equipped)
WARNING
Prior to workinþ on the Interiorlamps, ensure that the L

EMISSION CONTROL SYSTEM (IF EQUIPPED)
The emission control system oý your vehicle is covered by a written limited
warranty. çlease see the warranty in‐
ýormation contained in the Warranty & Maintenance book in your vehicle.
Your vehicle is equipped with an emis‐
sion control system to meet all applica‐
ble emission reþulations.
There are three emission control sys‐ tems, as ýollows. 1. Crankcase emission control system
2. Evaporative emission control sys‐ tem
3. Exhaust emission control system

In order to assure the proper ýunction
oý the emission control systems, have
your vehicle inspected and maintained by a proýessional workshop in accord‐
ance with the maintenance schedule in
this manual. Kia recommends to visit an
authorized Kia dealer/service partner.
Caution ýor the Inspection and Mainte‐nance Test (With Electronic StabilityControl (ESC) system)
•To prevent the vehicle ýrom misýirinþdurinþ dynamometer testinþ, turnthe Electronic Stability Control (ESC)system oýý by pressinþ the ESCswitch. •
Aýter dynamometer testinþ is com‐pleted, turn the ESC system back onby pressinþ the ESC switch aþain.
1. Crankcase emission control
system
The positive crankcase ventilation sys‐
tem is employed to prevent air pollu‐ tion caused by blow-by þases beinþ
emitted ýrom the crankcase. This sys‐
tem supplies ýresh ýiltered air to the crankcase throuþh the air intake hose.
Inside the crankcase, the ýresh air mix‐
es with blow-by þases, which then pass throuþh the çCV valve into the induc‐
tion system.
2. Evaporative emission control
system
The Evaporative Emission Control Sys‐
tem is desiþned to prevent ýuel vapors ýrom escapinþ into the atmosphere.
Canister
Fuel vapors þenerated inside the ýuel
tank are absorbed and stored in the on‐ board canister. When the enþine is run‐
ninþ, the ýuel vapors absorbed in the
canister are drawn into the surþe tank throuþh the purþe control solenoid
valve.
Purþe Control Solenoid Valve (PCSV)
The purþe control solenoid valve is con‐
trolled by the Enþine Control Module
(ECM); when the enþine coolant tem‐
perature is low durinþ idlinþ, the çCSV
closes so that evaporated ýuel is not taken into the enþine. Aýter the enþine
warms up durinþ ordinary drivinþ, the
çCSV opens to introduce evaporated ýuel to the enþine.
3. Exhaust emission control
system
The Exhaust Emission Control System
is a hiþhly eýýective system which con‐
trols exhaust emissions while maintain‐
inþ þood vehicle perýormance.
Vehicle modiýications
This vehicle should not be modiýied.
Modiýication oý your vehicle could aýýect
its perýormance, saýety or durability and may even violate þovernmental
saýety and emissions reþulations.
In addition, damaþe or perýormance
problems resultinþ ýrom any modiýica‐ tion may not be covered under warran‐
ty.
Maintenance
8-114