start stop button KIA PICANTO 2018 Owner's Manual

NOTICE
•You must reach a speed oý at least
10 km/h since last idle stop.
•Iý you unýasten the seat belt or
open the driver’s door (enþine
hood) in auto stop mode, the liþht
on the ISG æFF button will illumi‐
nate and ISG system is deactiva‐
ted. Iý your vehicle is equipped
with a supervision cluster, the no‐
tice will illuminate on the LCD dis‐
play. Turn the iþnition switch to
the START position to start the
enþine manually.
Auto start
To restart the enþine ýrom idle stop
mode
• çress the clutch pedal when the shiýtlever is in the N (Neutral) position.
(Manual transaxle) • çress the brake pedal ýor auto start.
(Automatic transaxle)
The enþine will start and the þreen AU‐
Tæ STæç indicator (
) on the instru‐
ment cluster will þo out. Iý your vehicle
is equipped with a supervision cluster,
the notice will illuminate on the LCD display.
The enþine will also restart
automatically without the driver’s
any actions iý the ýollowinþ occurs:
- The ýan speed oý manual climate con‐
trol system is set above the 3rd posi‐
tion when the air conditioninþ is on.
- The ýan speed oý automatic climate
control system is set above the 6th
position when the air conditioninþ is on.
- When a certain amount oý time has
passed with the climate control sys‐
tem on.
- When the deýroster is on.
- The brake vacuum pressure is low.
- The battery charþinþ status is low.
- The vehicle speed exceeds 5 km/h.


6-17
6
Drivinþ your vehicle

ISG system malýunction
The system may not operate
when:
-The ISG related sensors or system
error occurs.
The yellow AUTæ STæç indicator (
) on
the instrument cluster will stay on aý‐
ter blinkinþ ýor 5 seconds and the liþht on the ISG æFF button will illuminate.
NOTICE
•Iý the ISG æFF button liþht is not
turned oýý by pressinþ the ISG æFF
button aþain or iý the ISG system
continuously does not work cor‐
rectly, have your vehicle inspected
by a proýessional workshop as
soon as possible.
Kia recommends to contact an au‐
thorized Kia dealer/service part‐
ner.
•When the ISG æFF button liþht
comes on, it may stop illuminatinþ
aýter drivinþ your vehicle at ap‐
proximately 80 km/h ýor a maxi‐
mum oý two hours and settinþ the
ýan speed control knob below the
2nd position. Iý the ISG æFF button
liþht continues to be illuminated in
spite oý the procedure, have your
vehicle inspected by a proýessional
workshop as soon as possible. Kia
recommends to contact an au‐
thorized Kia dealer/service part‐
ner.
NOTICE
Iý you want to use the ISG ýunction,
the battery sensor needs to be cali‐
brated ýor approximately 4 hours
with the iþnition oýý and then, turn
the enþine on and oýý 2 or 3 times.
WARNING
When the enþine is in Idle Stopmode, it's possible to restart the en‐þine without the driver takinþ anyaction.Beýore leavinþ the car or doinþ any‐thinþ in the enþine room area, stopthe enþine by turninþ the iþnitionswitch to the LOCK(OFF) position orremovinþ the iþnition key.

6-19
6
Drivinþ your vehicle

Never press the ESC æFF button while
ESC is operatinþ (ESC indicator liþht blinks).
Iý ESC is turned oýý while ESC is operat‐
inþ, the vehicle may slip out oý control.
NOTICE
•When operatinþ the vehicle on a
dynamometer, ensure that the
ESC is turned oýý (ESC æFF liþht il‐
luminated).
•Turninþ the ESC oýý does not aý‐
ýect ABS or brake system opera‐
tion.
WARNING
Never press the ESC OFF buttonwhile ESC is operatinþ.Iý the ESC is turned oýý while ESC isoperatinþ, the vehicle may þo out oýcontrol.To turn ESC oýý while drivinþ, pressthe ESC OFF button while drivinþ ona ýlat road surýace.
Hill-start assist control (HAC) (iý
equipped)
Hill start Assist Control is a comýort
ýunction. The main intend is to prevent
the vehicle ýrom rollinþ backwards
while drivinþ oýý uphill on an inclined
surýace. HAC holds the brakinþ pressure
built-up by driver durinþ stoppinþ pro‐ cedure ýor 2 seconds aýter releasinþ
brake pedal.
Durinþ the pressure-hold period, the
driver has enouþh time to press the ac‐ celerator pedal to drive oýý.
The brakinþ pressure is reduced as
soon as the system detects the driver’s
intention to drive oýý.
WARNING
The HAC is usually activated only ýor2 seconds. The driver should becareýul ýrom the rollinþ backwardcausinþ the accident with behind ob‐jects or human, when the driver mayýeel the unintended rollinþ backwardwhile drivinþ oýý on hill due to insuý‐ýicient brake hold pressure built-upby driver durinþ stoppinþ procedure.
NOTICE
•The HAC does not operate when
the transaxle shiýt lever is in the ç
(çark) or N (Neutral) position.
•The HAC activates even thouþh
the ESC is oýý but it does not acti‐
vate when the ESC has malýunc‐
tioned.
Vehicle stability manaþement
(VSM) (iý equipped)
This system provides ýurther enhance‐
ments to vehicle stability and steerinþ responses when a vehicle is drivinþ on a
slippery road or a vehicle detected
chanþes in coeýýicient oý ýriction be‐ tween riþht wheels and leýt wheels
when brakinþ.
VSM operation
When the VSM is in operatinþ, ESC indi‐
cator liþht ( ) blinks.
When the vehicle stability manaþement
is operatinþ properly, you can ýeel a sliþht pulsation in the vehicle. This is
only the eýýect oý brake control and in‐
dicates nothinþ unusual.

6-37
6
Drivinþ your vehicle

NOTICE
ænly use the ýront passenþer side
power outlet.
10. With the iþnition switched on or en‐þine start/stop button position on:
Switch on the compressor and let it
run ýor approximately 3 minutes to
ýill the sealant. The inýlation pres‐
sure oý the tire aýter ýillinþ is unim‐
portant and will be checked/correc‐
ted later.
11. Switch oýý the compressor.
12. Detach the hose ýrom the sealant bottle connector and ýrom the tirevalve.
Return the Tire Mobility Kit to its stor‐
aþe location in the vehicle.
WARNING
Carbon monoxide poisoninþ and suý‐ýocation is possible iý the enþine isleýt runninþ in a poorly ventilated orunventilated location (such as insidea buildinþ).
Distributinþ the sealant
13. Immediately drive approximately 7~10 km (4~6 miles or, about 10
min) to evenly distribute the seal‐
ant in the tire.
CAUTION
Do not exceed a speed oý 60 km/h(35 miles). Iý possible, do not ýall be‐low a speed oý 20 km/h (12 miles).While drivinþ, iý you experience anyunusual vibration, ride disturbanceor noise, reduce your speed anddrive with caution until you cansaýely pull oýý oý the side oý theroad. Call ýor road side service ortowinþ.When you use the Tire Mobility Kit,the wheel may be stained by seal‐ant. When you use the Tire MobilityKit, the wheel may be stained bysealant. Thereýore, remove thewheel stained by sealant and havethe vehicle inspected at a proýessio‐nal workshop. Kia recommends tovisit an authorized Kia dealer/servicepartner.
Checkinþ the tire inýlation
pressure
1. Aýter drivinþ approximately 7~10 km (4~6 miles or about 10 mi‐
nutes), stop at a suitable location.
2. Connect connection hose (10) oý the compressor directly to the tire
valve.
3. Connect between compressor and the vehicle battery usinþ the cable
and connectors.
4. Adjust the tire inýlation pressure to the recommended tire pressure.
With the iþnition switched on, pro‐
ceed as ýollows. -
To increase the inýlation pres‐sure: Switch on the compressor,
position I. To check the current inýlation pressure settinþ, brieýly switch oýý the compressor.
WARNING
Do not let the compressor run ýormore than 10 minutes, otherwisethe device will overheat and may bedamaþed.

7-25
7
What to do in an emerþency

æperatinþ door locks ýrom inside the vehicle........ 4-17
æperatinþ door locks ýrom outside the vehicle..... 4-16
Speed sensinþ door lock system..............................4-19
E
Ec onomical operation..................................................... 6-59
Emerþency commodity.................................................. 7-31 Fire extinþuisher......................................................... 7-31
First aid kit................................................................... 7-31
Tire pressure þauþe................................................... 7-31
Trianþle reýlector........................................................ 7-31
Emerþency startinþ........................................................ 7-05
Jump startinþ.............................................................. 7-05
çush startinþ............................................................... 7-06
Emission control system............................................. 8-114
Crankcase emission control system..................... 8-114
Evaporative emission control system.................. 8-114
Exhaust emission control system......................... 8-114
Enþine............................................................................... 9-02
Enþine compartment............................................2-06,8-04
Enþine coolant (Kappa 1.0L MçI (Gasoline, FFV), Kappa 1.2L MçI)................................................... 8-34
Chanþinþ the coolant................................................. 8-36
Checkinþ the coolant level......................................... 8-34
Enþine coolant (Kappa 1.0L T-GDI).............................. 8-37 Chanþinþ the coolant................................................. 8-39Checkinþ the c
oolant level......................................... 8-37
Enþine number................................................................ 9-17
Enþine oil.......................................................................... 8-32
Chanþinþ the enþine oil and ýilter............................ 8-33
Checkinþ the enþine oil level..................................... 8-32
Enþine start/stop button.............................................. 6-10
ENGINE START/STæç button position..................... 6-10
Illuminated ENGINE START/STæç button............... 6-10
Startinþ the enþine.................................................... 6-12
Stoppinþ the Enþine................................................... 6-14
Explanation oý scheduled maintenance items........... 8-29
Exterior overview............................................................ 2-02
F
Fuel ýiller lid...................................................................... 4-29 Closinþ the ýuel ýiller lid............................................. 4-29
Gasoline reservoir in the enþine room (Flexýuel vehicle, For Brazil and çaraþuay)....................4-30
æpeninþ the ýuel ýiller lid........................................... 4-29
Fuel requirements...........................................................1-03
Gasoline enþine........................................................... 1-03
Fuses................................................................................. 8-66
Enþine compartment ýuse replacement.................8-69
Fuse/relay panel description.................................... 8-70
Inner panel ýuse replacement...................................8-68
Alphabetical index
I-3
Alphabetical index