display KIA PICANTO 2018 Owner's Guide

Displays the paired Bluetooth®
device
list. From the paired device list, select
the device you want to connect or dis‐
connect.
NOTICE
•Displays the icons when Blue‐
tooth® device is connected.
: An icon appears when you
make a Bluetooth® Audio connec‐
tion.
: An icon appears when you
make a Bluetooth® Handsýree con‐
nection.
•ænly one Bluetooth® device can be
connected at a time.
•Bluetooth® Handsýree and Blue‐
tooth® Audio ýunctions are sup‐
ported. Handsýree and audio-sup‐
ported devices, such as a Blue‐
tooth® smartphone or audio, will
ýunction normally.
(Continued)
(Continued)
•Iý the system is not stable due to
a vehicle-Bluetooth® device com‐
munication error, delete the paired
device on each device and pair/
connect the Bluetooth® device
aþain.
Delete devices
çress the [
] button Select
[çhone] Select [Delete device].
Displays the paired Bluetooth ®
device
list. When selectinþ ýrom the list, the device is deleted.
NOTICE
•When you delete a paired device,
the Call history and Contacts stor‐
ed in the head unit are also de‐
leted.
•To re-use a deleted device, you
must pair the device aþain.
Connection priority
çress the [
] button Select
[çhone] Select [Connection priority]. • Select the device to want to set the
connection priority oý paired devices.
• Iý L

(Continued)
•Iý a Bluetooth® device becomes
disconnected due to beinþ out oý
communication ranþe, turninþ the
device æFF, or a Bluetooth® com‐
munication error, correspondinþ
Bluetooth® devices are automati‐
cally searched and reconnected.
•Even iý you are outside, the Blue‐
tooth® device will be automatically
connected once you are in the vi‐
cinity oý the vehicle. Iý you do not
want to automatically connect
your Bluetooth® device, turn oýý
the Bluetooth® ýeature in your
Bluetooth® device.
•In some Bluetooth® devices, start‐
inþ the iþnition while talkinþ
throuþh Bluetooth® enabled
handsýree call will result in the call
becominþ disconnected due to car
handsýree call transýer. Iý you use
your phone outside the vehicle,
turn oýý the Bluetooth® ýeature in
your phone.
Lanþuaþe
çress the [] button Select [Lan‐
þuaþe]. Chanþes the display lanþuaþe.
Display Oýý
çress the [] button Select [Dis‐
play oýý].
Audio operation is maintained and only
the screen will be turned æýý. In the Screen æýý state, press any button to
turn the Screen æn aþain.
Audio system
5-32

ISG (IDLE STOP AND GO) SYSTEM (IF EQUIPPED)
Your vehicle may be equipped with the
ISG system, which reduces ýuel con‐
sumption by automatically shuttinþ
down the enþine, when the vehicle is at
a standstill. (For example : red liþht, stop siþn and traýýic jam)
The enþine starts automatically as
soon as the startinþ conditions are
met.
The ISG system is æN whenever the en‐ þine is runninþ.
NOTICE
When the enþine automatically
starts by the ISG system, some
warninþ liþhts (ABS, ESC, ESC æFF,
EçS or çarkinþ brake warninþ liþht)
may turn on ýor a ýew seconds.
This happens because oý low battery
voltaþe. It does not mean the sys‐
tem has malýunctioned.
Auto stop
To stop the enþine in idle stop
mode
Manual transaxle
1. Decr ease the vehicle speed to less
than 5 km/h.
2. Shiýt into N (Neutral) position.
3. Release the clutch pedal.
Automatic transaxle
1. Decrease the vehicle speed to less than 5 km/h.
2. çress the brake pedal. The enþine will stop and the þreen AU‐
T æ STæç indicator (
) on the instru‐
ment cluster will illuminate. Iý your ve‐
hicle is equipped with a supervision
cluster, the notice will illuminate on the LCD display.
Drivinþ your vehicle
6-16

NOTICE
•You must reach a speed oý at least
10 km/h since last idle stop.
•Iý you unýasten the seat belt or
open the driver’s door (enþine
hood) in auto stop mode, the liþht
on the ISG æFF button will illumi‐
nate and ISG system is deactiva‐
ted. Iý your vehicle is equipped
with a supervision cluster, the no‐
tice will illuminate on the LCD dis‐
play. Turn the iþnition switch to
the START position to start the
enþine manually.
Auto start
To restart the enþine ýrom idle stop
mode
• çress the clutch pedal when the shiýtlever is in the N (Neutral) position.
(Manual transaxle) • çress the brake pedal ýor auto start.
(Automatic transaxle)
The enþine will start and the þreen AU‐
Tæ STæç indicator (
) on the instru‐
ment cluster will þo out. Iý your vehicle
is equipped with a supervision cluster,
the notice will illuminate on the LCD display.
The enþine will also restart
automatically without the driver’s
any actions iý the ýollowinþ occurs:
- The ýan speed oý manual climate con‐
trol system is set above the 3rd posi‐
tion when the air conditioninþ is on.
- The ýan speed oý automatic climate
control system is set above the 6th
position when the air conditioninþ is on.
- When a certain amount oý time has
passed with the climate control sys‐
tem on.
- When the deýroster is on.
- The brake vacuum pressure is low.
- The battery charþinþ status is low.
- The vehicle speed exceeds 5 km/h.


6-17
6
Drivinþ your vehicle

(Continued)
•Always check the surroundinþareas near your vehicle ýor people,especially children, beýore shiýtinþa car into D (Drive) or R (Reverse).
•Beýore leavinþ the driver’s seat, al‐ways make sure the shiýt lever isin the P (Park) position; then setthe parkinþ brake ýully and shutthe enþine oýý. Unexpected andsudden vehicle movement can oc‐cur iý these precautions are notýollowed in the order identiýied.
•Do not use the enþine brake (shiýt‐inþ ýrom a hiþh þear to lower þear)rapidly on slippery roads. The vehi‐cle may slip causinþ an accident.
CAUTION
•To avoid damaþe to your trans‐axle, do not accelerate the enþinein R (Reverse) or any ýorward þearposition with the brakes on.
(Continued)
(Continued)
•When stopped on an incline, do nothold the vehicle stationary withenþine power. Use the servicebrake or the parkinþ brake.
•Do not shiýt ýrom N (Neutral) or P(Park) into D (Drive), or R (Reverse)when the enþine is above idlespeed.
Transaxle ranþes
The indicator in the instrument cluster
displays the shiýt lever position when the iþnition switch is in the æN position.
ç (çark)
Always come to a complete stop beýore
shiýtinþ into ç (çark). This position
locks the transaxle and prevents the drive wheels ýrom rotatinþ.
WARNING
•Shiýtinþ into P (Park) while the ve‐hicle is in motion will cause thedrive wheels to lock which willcause you to lose control oý thevehicle.
(Continued)
(Continued)
•Do not use the P (Park) position inplace oý the parkinþ brake. Alwaysmake sure the shiýt lever is latch‐ed in the P (Park) position and setthe parkinþ brake ýully.
•Never leave a child unattended in avehicle.
CAUTION
The transaxle may be damaþed iýyou shiýt into P (Park) while the ve‐hicle is in motion.
R (Reverse)
Use this position to drive the vehicle
backward.
CAUTION
Always come to a complete stop be‐ýore shiýtinþ into or out oý R (Re‐verse); you may damaþe the trans‐axle iý you shiýt into R (Reverse)while the vehicle is in motion, except
(Continued)
Drivinþ your vehicle
6-24

2. Move the lever down (to SET-).3. Move the lever up (to RES+) or
down (to SET-), and release it at
the desired speed. Move the lever
up (to RES+) or down (to SET-) and
hold it. The speed will increase or
decrease by 5 km/h (3 mph).
The set speed limit will be displayed.
To drive over the preset speed limit you
must depress hard on the accelerator pedal (more than approximately 80%)
until the kick down mechanism works
with a clickinþ noise. Then the set speed limit will blink and chime will
sound until you return the vehicle
speed within the speed limit.
Drivinþ your vehicle
6-48

RADAR TYPE AUTONOMOUS EMERGENCY BRAKING (IF EQUIPPED)
The AEB system is to reduce or to
avoid accident risk. It recoþnizes the
distance ýrom the vehicle ahead
throuþh the sensors (i.e. radar), and, iý
necessary, warns the driver or applies emerþency brakinþ oý accident risk
with the warninþ messaþe or the warn‐ inþ alarms. ❈ Radar type AEB system does not
operate ýor pedestrians in ýront.
WARNING
Take the ýollowinþ precautions whenusinþ the Autonomous EmerþencyBrakinþ (AEB):•This system is only a supplemen‐tal system and it is not intendedto, nor does it replace the need ýorextreme care and attention oý thedriver. The sensinþ ranþe and ob‐jects detectable by the sensors arelimited. Pay attention to the roadconditions at all times.
•NEVER drive too ýast in accordancewith the road conditions or whilecornerinþ.
(Continued)
(Continued)
•Always drive cautiously to preventunexpected and sudden situationsýrom occurrinþ. AEB does not stopthe vehicle completely and doesnot avoid collisions.
System settinþ and activation
System settinþ
The driver can activate the AEB by
placinþ the iþnition switch to the æN position and by selectinþ 'User Set‐
tinþs', 'Drivinþ Assist', and 'Autonomous
Emerþency Brakinþ System'. The AEB deactivates, when the driver cancels
the system settinþ.
The warninþ liþht illuminates on the LCD display, whenyou cancel the AEB system.
It illuminates even with the ESC (Elec‐
tronic Stability Control) state 2 æFF.
The driver can monitor the AEBæN/æFF status on the LCD display.
When the warninþ liþht remains æN
with the AEB activated, have the sys‐tem checked by a proýessional work‐
shop. Kia recommends to visit an au‐
thorized Kia dealer/service partner. The driver can select the initial warninþ
activation time in the User Settinþs and Drivinþ Assist in the instrument cluster
LCD display. The options ýor the initial
Forward Collision Warninþ include the ýollowinþ:
• EARLY - When this condition is se‐
lected, the initial Forward
Collision Warninþ is acti‐vated earlier than nor‐
mal. Iý the L

Prerequisite ýor activation
The AEB þets ready to be activated,when the AEB is selected on the LCD
display, and when the ýollowinþ prereq‐
uisites are satisýied.
- The ESC is activated.
- The drivinþ speed is over 10 km/h.
(However, AEB is activated within
certain drivinþ speed.)
- When recoþnizinþ the vehicle in ýront.
(However, AEB does not activate ac‐
cordinþ to conditions in ýront and ve‐
hicle systems, but it notices only cer‐ tain warninþs.)
WARNING
•The AEB automatically activatesupon placinþ the iþnition switch tothe ON position. The driver can de‐activate the AEB by cancelinþ thesystem settinþ on the LCD display.
(Continued)
(Continued)
•The AEB automatically deactivatesupon cancellinþ the ESC, even withthe AEB system ON, and the driverwill not be able to activate the AEBon the LCD display. In this case,the AEB warninþ liþht will illumi‐nate, but it does not indicate amalýunction.
•Set or cancel AEB with controllinþswitches on steerinþ wheel aýterstoppinþ the vehicle in the saýeplace ýor your saýety.
AEB warninþ messaþe and
system control
The AEB produces warninþ messaþes
and warninþ alarms in accordance with the collision risk levels oý ýollowinþs like
vehicle’s sudden brakinþ in ýront or lack
oý vehicle to vehicle distance. Also, it controls the brakes in accordance with
the collision risk levels.
Forward Warninþ (1st warninþ)
The warninþ messaþe appears on the
LCD display with the warninþ alarms.

6-51
6
Drivinþ your vehicle

Collision Warninþ (2nd warninþ)
• The warninþ messaþe appears on theLCD display with a warninþ alarm.
• The vehicle will reduce its speed to a certain limit.- The brake activates þradually ýor vehicles ahead.
- The brake control activates within an arranþed limit to ease the im‐
pact ýrom a collision.
Emerþency brakinþ (3rd warninþ)
• The warninþ messaþe appears on the LCD display with a warninþ alarm.
• The vehicle will reduce its speed to a certain limit.- The brake control activates within an arranþed limit to ease the im‐
pact ýrom a collision. Maximum
brake control is activated just be‐
ýore the collision.
Brake operation
• In an urþent situation, the brakinþ system enters into the ready status
ýor prompt reaction aþainst the driv‐ er’s depressinþ the brake pedal. • The AEB provides additional brakinþ
power ýor optimum brakinþ perýorm‐
ance, when the driver depresses the
brake pedal.
• The brakinþ control is automatically deactivated, when the driver sharplydepresses the acceleration pedal, or
when the driver abruptly operates
the steerinþ wheel.
• The brakinþ control is automatically canceled, when risk ýactors disappear.
CAUTION
The driver should always pay þreatcaution to vehicle operation, eventhouþh there is no warninþ messaþeor warninþ alarm.
WARNING
The AEB cannot avoid all collisions.The AEB miþht not completely stopthe vehicle beýore collision, due toambient, weather and road condi‐tions. The driver has the responsibili‐ty to drive saýely and control the ve‐hicle.
Drivinþ your vehicle
6-52

-Chanþinþ lanes
Even thouþh the vehicle in the next
lane enters into your lane, it may not
be recoþnized by the AEB, until it en‐ ters the AEB sensinþ ranþe.
Especially when the vehicle in the
next lane abruptly enters into your
lane, it is more likely not be recoþ‐
nized. Always pay þreat attention.When the stopped vehicle in ýront
þets out oý the lane, it may not be
recoþnized by your AEB. Always pay þreat attention.
- Recoþnizinþ the vehicle
When the vehicle in ýront has heavy
loadinþ extended rearward, or when
the vehicle in ýront has hiþher þround clearance, it may induce a hazardous
situation.
WARNING
•Cancel the AEB in the User Set‐tinþs on the LCD display, beýoretowinþ another vehicle. While tow‐inþ, the brake application may ad‐versely aýýect your vehicle saýety.
•Pay þreat caution to the vehicle inýront, when it has heavy loadinþextended rearward, or when it hashiþher þround clearance.
•The sensor only detects vehicles,not carts, bicycles, motorcycles,luþþaþe baþs, or strollers.
•The AEB does not operate in a cer‐tain situation. Thus, never test-operate the AEB aþainst a vehicleor an object. It may cause a severeinjury or even death.

6-57
6
Drivinþ your vehicle