center console KIA STINGER 2018 Features and Functions Guide

INSTRUMENT CLUSTER
9*IF EQUIPPED ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLE TE OPER ATING INFORMATION AND SAFE T Y WARNINGS.
Forward Collision Avoidance (FCA) Assist*
The FCA system is designed to detect and monitor the
vehicle ahead or pedestrian* and alert the driver that a
collision is imminent and provide braking if needed. Warning
messages will appear on the LCD screen A and a chime
will sound. The FCA can be turned on/off in User Settings.
When turned on, the FCA will activate when the Engine
Start /Stop button is in the ON position, and vehicle is
traveling forward more than 6 mph and system can detect
objects in front.
Select alert settings (Early, Normal, Late) in the User
Settings in the instrument cluster LCD display.
LED Warning Messages:
REMINDERS:
- If the FCA is operating and the ESC (Electronic Stability Control) is turned off B, the FCA system is automatically turned off.
- When FCA system is off, the FCA warning indicator is on in the Instrument Cluster .
Your vehicle’s instrument cluster LCD may differ from those in the illustrations.
For more information on FCA operation, see the Owner’s Manual.
Forward Collision-Avoidance (FCA) Assist* is not a substitute for safe driving, and may not detect all objects in front of vehicle. Always drive safely and use caution.
Collision Warning
Emergency Braking
P
R
N
D
AUTO
HOLD
DRIVE MODE
OFF
OFF
VIEW
P
B
A
(Button is located in center console)

*IF EQUIPPED 30
CENTER PANEL
For more information on the Aux/USB/iPod® Port, Power Outlets and USB Charger, refer to the Owner’s Manual.
Aux/USB/iPod® Ports, Power Outlets & USB Charger
Clock
Select SETUP key on audio control unit. Then scroll to and select
DATE / TIME, and adjust.
Refer to the Car Multimedia System User’s Manual for more information.
REMINDER: Daylight Savings must be enabled or disabled in the Clock Settings screen.
Power Outlets A: Use the power outlets for mobile phones
and other devices designed to operate on a 12V (180W max)
power outlet.
Aux/USB/iPod® Port B: Use the Aux port to connect audio
devices and the USB port to connect USB audio devices,
smartphones and iPod® devices.
USB Charger C: Devices can be recharged using a USB
cable. The Engine Start /Stop button needs to in the ACC/ON/
START position to operate the USB Charger.
REMINDERS:
-
Using the power outlets (accessory plugs) for prolonged periods of time with the Engine Start /Stop button in the ACC position (Engine OFF ) may cause the battery to discharge
-
Use manufacturer cables only that came with your device. Third party cables may cause damage to device. It is recommended to always update your phone to the latest operating system release
Quick Tip
The power outlets are inactive when ignition is in the OFF position.
12V180WAUXUSB
BAC
(Located in center console in front of gearshift)