weight KIA STONIC 2018 Owners Manual
[x] Cancel search | Manufacturer: KIA, Model Year: 2018, Model line: STONIC, Model: KIA STONIC 2018Pages: 523, PDF Size: 24.99 MB
Page 8 of 523

1. Gasohol containing more than 10%ethanol.
2. Gasoline or gasohol containing methanol.
3. Leaded fuel or leaded gasohol.
CAUTION
Never use gasohol which containsmethanol. Discontinue use of anygasohol product which impairs driva‐bility.
Other fuels
Using fuels such as - Silicone (Si) contained fuel,
- MMT (Manganese, Mn) contained fuel,
- Ferrocene (Fe) contained fuel, and
- Other metallic additives contained fuels, may cause vehicle and engine
damage or cause plugging, misfiring, poor acceleration, engine stalling,
catalyst melting, abnormal corrosion,
life cycle reduction, etc.
Also, the Malfunction Indicator Lamp
(MIL) may illuminate.
NOTICE
Damage to the fuel system or per‐
formance problem caused by the
use of these fuels may not be cov‐
ered by your New Vehicle Limited
Warranty.
Use of MTBE
Kia recommends avoiding fuels contain‐ ing MTBE (Methyl Tertiary Butyl Ether)
over 15.0% vol. (Oxygen Content 2.7%
weight) in your vehicle.
Fuel containing MTBE over 15.0% vol. (Oxygen Content 2.7% weight) may re‐
duce vehicle performance and produce
vapor lock or hard starting.
CAUTION
Your New Vehicle Limited Warrantymay not cover damage to the fuelsystem and any performance prob‐lems that are caused by the use offuels containing methanol or fuelscontaining MTBE (Methyl TertiaryButyl Ether) over 15.0% vol. (OxygenContent 2.7% weight.)
Do not use methanol
Fuels containing methanol (wood alco‐ hol) should not be used in your vehicle.
This type of fuel can reduce vehicle
performance and damage components of the fuel system, engine control sys‐
tem and emission control system.
Fuel Additives
Kia recommends that you use unleaded
gasoline which has an octane rating of RON (Research Octane Number) 95 /
AKI (Anti Knock Index) 91 or higher (for
Europe) or Octane Rating of RON (Re‐ search Octane Number) 91 / AKI (Anti-
Knock Index) 87 or higher (except Eu‐
rope).
For customers who do not use good quality gasolines including fuel additives
regularly, and have problems starting
or the engine does not run smoothly, one bottle of additives added to the
fuel tank at every 15,000 km (For Eu‐
rope) / 10,000 km (Except Europe). Ad‐ ditives are available from a professional
workshop along with information on
how to use them. Kia recommends to visit an authorized Kia dealer/service
partner. Do not mix other additives.
Introduction
1-04
Page 46 of 523

CHILD RESTRAINT SYSTEM (CRS)
Our recommendation: Children
always in the rear
WARNING
Always properly restrain children inthe vehicle. Children of all ages aresafer when riding in the rear seats.Never place a rearward-facing ChildRestraint System on the front pas‐senger seat, unless the air bag is de‐activated.
Children under age 13 should always
ride in the rear seats and must always
be properly restrained to minimize the
risk of injury in an accident, sudden
stop or sudden maneuver.
According to accident statistics, chil‐ dren are safer when properly restrain‐
ed in the rear seats than in the front
seat. Children too large for a Child Re‐ straint System must use the seat belts
provided.
Most countries have regulations which
require children to travel in approved Child Restraint Systems. The laws governing the age or height/
weight restrictions at which seat belts
can be used instead of Child Restraint System differs among countries, so
you should be aware of the specific re‐
quirements in your country, and where you are travelling.
Child Restraint Systems must be prop‐
erly installed in the vehicle seat. Always
use a commercially available Child Re‐ straint System that meets the require‐
ments of your country.
Child Restraint System (CRS)
Infants and younger children must be
restrained in an appropriate rearward-
facing or forward-facing CRS that has first been properly secured to the seat
of the vehicle. Read and comply with
the instructions for installation and use provided by the manufacturer of the
Child Restraint System.
WARNING
•Always follow the Child RestraintSystem manufacturer’s instruc‐tions for installation and use.
(Continued)
(Continued)
•Always properly restrain your childin the Child Restraint System.
•Do not use an infant carrier or achild safety seat that L
Page 47 of 523

• Select a Child Restraint System thatfits the vehicle seating position where it will be used.
For the suitability of Child Restraint
Systems on the vehicle's seating po‐ sitions, please refer to the installa‐
tion tables.
• Read and comply with the warnings and instructions for installation and
use provided with the Child Restraint
System.
Child Restraint System types
There are three main types of Child Re‐
straint Systems: rearward-facing, for‐ ward-facing and booster Child Re‐
straint Systems.
They are classified according to the
child’s age, height and weight.
Rearward-facing Child Restraint Sys‐tem
A rearward-facing Child Restraint Sys‐
tem provides restraint with the seating surface against the back of the child.
The harness system holds the child in
place, and in an accident, acts to keep the child positioned in the Child Re‐
straint Systems and reduce the stress
to the fragile neck and spinal cord. All children under the age of one year
must always ride in a rearward-facing
Child Restraint System. There are dif‐
ferent types of rearward-facing Child Restraint Systems: infant-only Child
Restraint Systems can only be used
rearward-facing. Convertible and 3- in-1 Child Restraint Systems typically
have higher height and weight limits for
the rearward-facing position, allowing
you to keep your child rearward-facing for a longer period of time.
Keep using Child Restraint Systems in
the rearward-facing position as long as
children fit within the height and weight limits allowed by the Child Re‐
straint System's manufacturer.
3-27
3
Safety features of your vehicle
Page 48 of 523

Forward-facing Child Restraint System
A forward-facing Child Restraint Sys‐
tem provides restraint for the child’s body with a harness. Keep children in a
forward-facing Child Restraint System
with a harness until they reach the top height or weight limit allowed by your
Child Restraint System’s manufacturer.
Once your child outgrows the forward-
facing Child Restraint System, your child is ready for a booster seat.
Booster seats
A booster seat is a Child Restraint Sys‐
tem designed to improve the fit of the
vehicle’s seat belt system. A booster seat positions the seat belt so that it
fits properly over the stronger parts of
your child’s body. Keep your children in booster seats until they are big enough
to fit in a seat belt properly.
For a seat belt to fit properly, the lap
belt must lie comfortable across the upper thighs, not the stomach. The
shoulder belt should lie comfortable
across the shoulder and chest and not across the neck or face. Children under
age 13 must always be properly re‐
strained to minimize the risk of injury in an accident, sudden stop or sudden
maneuver.
Installing a Child Restraint
System (CRS)
WARNING
Before installing your Child RestraintSystem always:Read and follow the instructionsprovided by the manufacturer of theChild Restraint System.
(Continued)
(Continued)
Failure to follow all warnings and in‐structions could increase the risk ofa SERIOUS INJURY or DEATH if an ac‐cident occurs.
WARNING
If the vehicle headrest preventsproper installation of a Child Re‐straint System, the headrest of therespective seating position shall bereadjusted or entirely removed.
After selecting a proper Child Restraint
System for your child and checking that the Child Restraint System fits properly
on the seating position, there are three
general steps for a proper installation: •
Properly secure the Child RestraintSystem to the vehicle. All Child Re‐
straint Systems must be secured to
the vehicle with the lap belt or lap
part of a lap/shoulder belt or with the
ISOFIX top-tether and/or ISOFIX an‐
chorage and/or with the support leg.
Safety features of your vehicle
3-28
Page 169 of 523

Daytime running light (if
equipped)
The Daytime Running Lights (DRL) can
make it easier for others to see the front of your vehicle during the day.
DRL can be helpful in many different
driving conditions, and it is especially helpful after dawn and before sunset. The DRL system turns OFF when: 1. The headlight switch is ON.
2. The engine is OFF.
3. The front fog light is on.
4. Engaging the Parking Brake
Headlight leveling device (if
equipped)
0 : #
To adjust the headlight beam level ac‐
cording to the number of the passen‐ gers and loading weight in the luggage
area, turn the beam leveling switch.
The higher the number of the switch
position, the lower the headlight beam level. Always keep the headlight beam
at the proper leveling position, or head‐
lights may dazzle other road users.
Listed below are the examples of prop‐ er switch settings. For loading condi‐
tions other than those listed below, ad‐
just the switch position so that the beam level may be the nearest as the
condition obtained according to the list.
Loading conditionSwitch position
Driver only 0
Driver + Front passenger 0
Full passengers
(including driver) 1
Full passengers
(including driver) +Maximum permis‐sible loading 2
Driver + Maximumpermissible load‐ing 3
4-87
4
Features of your vehicle