display Lancia Delta 2008 Owner handbook (in English)

GETTING TO KNOW YOUR CAR27
1
IMPORTANT Each press of theÕor Ôbutton will in-
crease/decrease the value by one unit. Hold the button
down to increase/decrease the setting rapidly. Complete
the setting by briefly pressing the button when you ap-
proach the required setting.
– when accessing the “Format” submenu: briefly press
SET: the previously set display format will flash on the
display;
– press
Õor Ôto select “24h” or “12h”.
When you have made the required settings, briefly press
SET to go back to the sub-menu screen or hold the but-
ton down to go back to the main menu screen without stor-
ing the new settings.
– hold down SET to go back to the standard screen or
main menu, depending on which point in the menu you
have reached.Date setting (Set Date)
Using this function it is possible to update the date (day
- month - year).
To update the date proceed as follows:
– briefly press SET: the year starts flashing on the display;
– press
Õor Ôto change the setting;
– briefly press SET: “month” will flash on the display;
– press
Õor Ôto change the setting;
– briefly press SET: “day” will flash on the display;
– press
Õor Ôto change the setting.
IMPORTANT The setting increases or decreases by one
unit each time button
Õor Ôis pressed. Hold the but-
ton down to increase/decrease the setting rapidly. Com-
plete the setting by briefly pressing the button when you
approach the required setting.
– briefly press SET to go back to the menu screen or hold
the button down to go back to the standard screen with-
out storing the new settings.

28GETTING TO KNOW YOUR CAR
First page (Display of information on the initial
screen) (where provided)
This function allows you to choose the information you
would like to see on the main screen. You can choose to
display the date or the turbo charger turbocharging pres-
sure.
Proceed as follows:
– briefly press SET: “Initial page” will appear on the dis-
play;
– briefly press SET once again to show the display options:
“Date” and “Engine info”;
– press + or – to select the information you wish to see
on the main page of the display;
– briefly press SET to go back to the menu screen or hold
the button down to go back to the standard screen with-
out storing the new settings.
When the key is turned to MAR and the initial check stage
is over, the display will show the information selected via
the “initial page” menu function.See radio (Repeat audio information)
With this function the display repeats information rele-
vant to the sound system.
– Radio: tuned radio station frequency or RDS message,
automatic tuning activation or AutoSTore;
– audio CD, MP3 CD: track number;
– CD Changer: CD number and track number.
To activate (On) or to deactivate (Off) sound system in-
fo displaying proceed as follows:
– press SET briefly: (On) or (Off) will flash on the display
(according to previous setting);
– press
Õor Ôto change the setting;
– briefly press SET to go back to the menu screen or hold
the button down to go back to the standard screen with-
out storing the new settings.
Autoclose (Automatic door lock operation with car
running)
When activated (On), this function automatically locks
the doors when the car speed exceeds 20 km/h.
Proceed as follows to switch this function on or off:
– briefly press SET to display a submenu;
– briefly press SET: (On) or (Off) will flash on the display
(according to previous setting);
– press
Õor Ôto change the setting;

GETTING TO KNOW YOUR CAR29
1
– briefly press SET to go back to the submenu screen or
hold the button down to go back to the main menu screen
without storing the new settings;
– hold down SET to go back to the standard screen or
main menu, depending on which point in the menu you
have reached.
Unit of measurement (Set unit of measurement)
This function may be used to set the units of measurement
via three submenus: “Distances”, “Fuel consumption” and
“Temperature”. To set the required unit of measurement
proceed as follows:
– briefly press SET to display the three sub-menus;
– press
Õor Ôto navigate the three sub-menus;
– once you have selected a sub-menu, press SET briefly;- when accessing the “Distance” submenu: briefly press
SET: either “km” or “mi” will appear on the display (ac-
cording to the previous setting);
– press
Õor Ôto change the setting;
– when accessing the “Fuel consumption” submenu:
briefly press SET: either “km/l ”, “l/100km” or “mpg”
will appear on the display (according to the previous set-
ting);
If the set distance unit is “km”, the display enables set-
ting of the fuel consumption unit (km/l or l/100) de-
pending on the amount of fuel consumed.
If the distance unit of measurement is set as“mi” the fuel
consumption unit of measurement will be displayed in
“mpg”.
– press
Õor Ôto change the setting;
– when accessing the “Temperature” submenu: briefly
press SET: either “°C” or “°F” will appear on the display
according to the previous setting;
– press
Õor Ôto change the setting;
When you have made the required settings, briefly press
SET to go back to the sub-menu screen or hold the but-
ton down to go back to the main menu screen without stor-
ing the new settings.
– hold down SET to go back to the standard screen or
main menu, depending on which point in the menu you
have reached.

30GETTING TO KNOW YOUR CAR
Language (Selecting the language)
Messages can be displayed in the following languages: Ital-
ian, German, English, Spanish, French, Portuguese, Dutch.
To set the required language proceed as follows:
– briefly press button SET: the previously set language
starts flashing on the display;
– press
Õor Ôto change the setting;
– briefly press SET to go back to the menu screen or hold
the button down to go back to the standard screen with-
out storing the new settings.
Buzzer volume (Adjusting the failure/warning
buzzer volume)
With this function the volume of the buzzer accompanying
any failure/warning indication can be adjusted (8 levels).
To adjust the volume proceed as follows:
– briefly press SET: the previously set volume level starts
flashing on the display;
– press
Õor Ôto change the setting;
– briefly press SET to go back to the menu screen or hold
the button down to go back to the standard screen with-
out storing the new settings.Button volume (Button volume adjustment)
This function enables you to set the volume of the roger-beep
accompanying the activation of buttons SET,
Õand Ô.
To adjust the volume proceed as follows:
– briefly press SET: the previously set volume level starts
flashing on the display;
– press
Õor Ôto change the setting;
– briefly press SET to go back to the menu screen or hold
the button down to go back to the standard screen with-
out storing the new settings.
Seat belt beep/buzz.
(Buzzer activation for S.B.R. indication)
This function can only be displayed after a Lancia Deal-
ership has deactivated the S.B.R. system (see paragraph
“S.B.R. system” in chapter 2).
Service (Scheduled servicing)
This function allows you to view information on car ser-
vicing deadlines based on kilometres travelled.

GETTING TO KNOW YOUR CAR31
1
This information can be consulted as follows:
– briefly press SET: the display shows the next service
deadline in km or mi according to the previous setting (see
paragraph “Distance unit of measurement”);
– briefly press SET to go back to the menu screen or hold
the button down to go back to the standard screen.
IMPORTANT The “Scheduled Servicing Plan” requires
the vehicle to be serviced every 35,000 km (or equiva-
lent distance is miles). This information is displayed au-
tomatically when the key is turned to MAR, from 2,000
km (or equivalent distance is miles) from the deadline,
and reappears every 200 km (or equivalent distance is
miles). The indications will appear more frequently when
there are less than 200 km left. The indication will appear
in kilometres or miles according to the unit of measure-
ment settings. When the next scheduled service opera-
tion is approaching, the message “Service” will appear on
the display followed by the number of kilometres or miles
left when the key is turned to MAR. Go to a Lancia Deal-
ership where the “Scheduled Service” operations will be
performed and the message will be reset.Air Bag/Passenger Bag
This function is used to activate/deactivate the front pas-
senger’s air bag.
Proceed as follows:
– briefly press SET and, after displaying the message “Bag
pass: Off) (to deactivate) or Bag pass: On) (to activate) by
pressing
Õor Ô, press SET once again;
– the confirmation request message will be displayed;
– press
Õor Ôto select (Yes) (confirming activa-
tion/deactivation) or (No) (to abort);
– briefly press SET to confirm the setting and go back to
the menu screen or hold the button down to go back to the
standard screen without storing the new settings.

32GETTING TO KNOW YOUR CAR
Daytime lights (D.R.L. - Smart Daytime Light)
This function allows you to activate/deactivate the day-
light lights.
Proceed as follows to switch this function on or off:
– briefly press SET to display a submenu;
– briefly press SET: (On) or (Off) will flash on the display
(according to previous setting);
– press + or – to change the setting;
– briefly press the SET button to go back to the submenu
screen or hold the button down to go back to the main
menu screen without storing the new settings;
– hold down SET to go back to the standard screen or
main menu, depending on which point in the menu you
have reached.
Exit Menu
This is the last function that closes the setting cycle list-
ed in the initial menu screen. Briefly press SET to go back
to the standard screen without storing the new settings.
Press
Ôto return to the first menu option (Speed Beep).DISPLAY INDICATIONS
IMPORTANT Failure indications on the display fall into
one of two categories: serious faults and less serious faults.
Serious failures are indicated by a repeated and prolonged
warning cycle.
Less serious failures are indicated by a limited warning
cycle.
Press SET to stop the warning cycle in both cases. The
warning light (or symbol in the display) will remain on
until the cause of the malfunction is eliminated.
Luggage compartment not closed
correctly (red)
This symbol (where provided) lights up on the
display when the luggage compartment is not
closed correctly. The display will show a dedicated mes-
sage.
R
Bonnet not closed correctly (red)
This symbol (where provided) lights up on the
display when the bonnet is not closed correct-
ly. The display will show a dedicated message.
S

GETTING TO KNOW YOUR CAR33
1
Possible presence of ice on the road
The outdoor temperature indication starts
flashing when the outside temperature reach-
es or falls below 3°C and the
symbol lights
up on the display to warn the driver of the possible pres-
ence of ice on the road.
The display will show a dedicated message.Adaptive lighting not available
The display shows a dedicated message when the
adaptive lighting system is not available.
Contact a Lancia Dealership. External lighting failure (amber)
The symbol lights up on the display when a
fault is detected in the brake lights.
The display will show a dedicated message
W

Lane assistance on
The display shows a dedicated message when
the lane assistance function is switched on.
ef
Steering corrector not available
(DST - Dynamic Steering Torque)
The display shows a dedicated message when
the steering corrector has failed. Contact a Lan-
cia Dealership.
è
Service deadline exceeded
The display shows a dedicated message to in-
dicate the scheduled servicing deadline.
Speed limit exceeded
The display shows a dedicated message when the preset
speed limit is exceeded (for Arabic countries the speed lim-
it is set at 120 km/h). The icon shown on the display rep-
resents the set speed limit.
õ

34GETTING TO KNOW YOUR CAR
TRIP COMPUTER
GENERAL FEATURES
The Trip computer is used to display information on car
operation when the key is turned to MAR. This function
allows you to define two separate trips called “Trip A” and
“Trip B” for monitoring the car’s complete mission (trip)
in a mutually independent manner.
Both functions can be reset (reset - start of new mission).
Trip A can be used to display figures relating to:
– Range
– Distance travelled
– Average fuel consumption
– Instantaneous fuel consumption
– Average speed
– Travel time (driving time).
– Trip A Reset
The Trip B function is used to display information relat-
ing to:
– Distance travelled B
– Average fuel consumption B
– Average speed B
– Travel time B (driving time).
– Trip B ResetNote “Trip B” functions may be excluded (see “Enabling
Trip B”). “Range” and “Instantaneous fuel consumption”
parameters cannot be reset.
Values displayed
Range
Approximately indicates the distance the vehicle can trav-
el with the present amount of fuel in the tank. The message
“- - - -” will appear on the display in the following cases:
– range value lower than 50 km (or 30 mi)
– car left parked with the engine running for a long time.
IMPORTANT Changes in the range value can be affect-
ed by many factors: driving style (see “Driving style” in
“Starting up and driving”), type of route (motorway, ur-
ban cycle, mountain roads, etc…), conditions of use of the
car (load, tyre pressure, etc.). The above notes should
therefore be taken into consideration when planning a trip.
Distance travelled
This indicates the approximate distance covered from the
start of the new mission.

GETTING TO KNOW YOUR CAR35
1
Average fuel consumption
This value shows the approximate average fuel con-
sumption from the start of the new mission.
Instantaneous fuel consumption
This indicates any change in fuel consumption. The value is
constantly updated. The message “- - - -” will appear on the
display if the car is parked with the engine running.
Average speed
This value shows the average speed of the car based on
the overall time elapsed since the start of the new mission.
Travel time
This value shows the time elapsed since the start of the
new mission.
Trip Reset
This resets the Trip computer settingsTRIP button fig. 8
The TRIP button is located on the right-hand lever. With
the ignition key turned to MAR, this button allows you
to view the previously described parameters and also ze-
ro them to begin a new mission:
– short press to display the different values;
– long press to reset and then start a new mission.
fig. 8L0E0007m

36GETTING TO KNOW YOUR CAR
New mission
The new mission begins after:
– “manual” resetting by the user, by pressing the rele-
vant button;
– automatic resetting, when the Trip distance reaches
9999.9 km or when the Travel time reaches 99.59 (99
hours and 59 minutes);
– disconnection/reconnection of the battery.
IMPORTANT If the reset operation is carried out when
“Trip A” is being displayed, only the information associ-
ated with this function is reset.
IMPORTANT If the reset operation is carried out when
“Trip B” is being displayed, only the information associ-
ated with this function is reset.
Start trip procedure
With ignition key turned to MAR, carry out the reset op-
eration by pressing and holding down the TRIP button for
longer than 2 seconds.
Exit Trip
You can automatically exit from the TRIP function once
all the values have been displayed or by holding the SET
button down for more than 1 second.SYMBOLS
Special coloured labels have been attached near to or on
some of the components of your car. These labels bear
symbols that remind you of the precautions to be taken
with regards to that particular component.
A plate summarising these symbols can be found under
the bonnet.