Pressure Lancia Musa 2007 Owner handbook (in English)
[x] Cancel search | Manufacturer: LANCIA, Model Year: 2007, Model line: Musa, Model: Lancia Musa 2007Pages: 346, PDF Size: 5.15 MB
Page 293 of 346

292
WARNING
LIGHTS AND
MESSAGES
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
SERVICE SCHEDULE
Thousands of km
Check tyre conditions/wear and
adjust pressure if required
Check light system operation
(headlights, direction indicators, hazard lights, boot lights,
passenger compartment lights, dashboard warning lights, etc.)
Check windscreen/washer
(nozzles/and blade position regulation)
Check front disk brake pad conditions and wear
Check rear drum brake lining conditions
and wear
Sight inspect the conditions of: body external parts, underbody
protection pipes and hoses (exhaust, fuel, brakes),
rubber parts (boots, sleeves, bushes, etc.)
Check for bonnet and boot lock cleanness, lever cleanness
and lubrication
Check tension and adjust accessory drive belts
(excluding engines with automatic belt tighteners)
Check tension and adjust accessory drive belts
Check and adjust tappet clearance
(1.48V(where provided)-1.9 Multijet versions)
20 40 60 80 100 120 140 160 180
●●●●● ●●●●
●●●●● ●●●●
●●●●● ●●●●
●●●●● ●●●●
●●●
●●●●● ●●●●
●●●●● ●●●●
●
●● ● ●
●● ● ●
Page 295 of 346

ANNUAL INSPECTION SCHEDULE
For cars with an annual mileage of below 20,000
km (for example about 15,000 km) the following
yearly inspection programme is provided:
❒check tyre conditions/wear and adjust pressure if
required (including the spare wheel);
❒check lighting system operation (headlights,
direction indicators, hazard lights, boot lights,
passenger compartment lights, warning lights,
etc.);
❒check windscreen/washer
(nozzles/and blade position regulation)
❒check front disk brake pad conditions and wear;
❒sight inspect the conditions of: engine, gearbox,
transmission, pipes and hoses (exhaust - fuel -
brakes), rubber parts (boots, sleeves, bushes, etc;
❒check for bonnet and boot lock cleanness, lever
cleanness and lubrication;
❒check battery charge;
❒visual check on various drive belt conditions;
❒top up fluid levels (engine coolant, brakes,
windscreen washer, battery, etc.);
❒change engine oil;
❒change engine oil filter;
❒replace pollen filter (where provided).
ADDITIONAL CHECKS
Every 1,000 km or before long journeys, check and
top up if required:
❒engine coolant fluid level;
❒brake fluid level;
❒windscreen washer fluid level;
❒tyre pressure and conditions.
Every 3,000 km check and top up if required:
engine oil level.
You are recommended to use FL Selenia products,
designed and produced specifically for Lancia cars
(see table “Capacities” in section “Technical
specifications”).
294
WARNING
LIGHTS AND
MESSAGES
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
Page 310 of 346

WHEELS AND TYRES
Check the pressure of each tyre, including the spare, every two weeks
and before long journeys. The pressure should be checked with the
tyre rested and cold.
For the correct tyre inflation pressure, see “Wheels” in “Technical
specifications” section.
Incorrect pressure causes abnormal tyre wear:
A: normal pressure: tread evenly worn.
B: low pressure: tread particularly worn at the edges.
C: high pressure: tread particularly worn in the centre.
Tyres must be replaced when the tread wears down to 1.6 mm. In any
case, comply with the laws in the country where the car is being
driven.
IMPORTANT NOTES
❒As far as possible, avoid sharp braking and screech starts, etc. Be
careful not to hit the kerb, potholes or other obstacles hard.
Driving for long stretches over bumpy roads can damage the tyres;
❒Periodically check that the tyres have no cuts in the side wall,
abnormal swelling or irregular tyre wear. If any of these occur,
have the car seen to at a Lancia Dealership;
309
WARNING
LIGHTS AND
MESSAGES
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
L0D0216m
Page 311 of 346

❒Avoid overloading the vehicle when travelling:
this may cause serious damage to the wheels and
tyres;
❒If a tyre is punctured, stop immediately and
change it to avoid damage to the tyre, the rim,
suspensions and steering system;
❒Tyres age even if they are not used much. Cracks
in the tread rubber are a sign of ageing. In any
case, if the tyres have been on the car for over 6
years, they should be checked by specialised
personnel, to see if they can still be used.
Also remember to check the spare wheel;
❒In the case of replacement, always fit new tyres,
avoiding those of dubious origin;
❒If a tyre is changed, also change the inflation
valve;
❒To allow even wear between the front and rear
tyres, it is advisable to change them over every
10-15 thousand kilometres, keeping them on the
same side of the car so as to not reverse the
direction of rotation.
310
WARNING
LIGHTS AND
MESSAGES
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
WARNINGIf the pressure is too low the tyre overheats and this can cause it serious damage.
WARNINGRemember that road holding depends also on the correct tyre inflating pressure.
WARNINGDo not cross switch the tyres, moving them from the right of the car to the left and
vice versa.
Never submit alloy rims to repainting treatments requiring to use temperatures
exceeding 150°C since the mechanical properties of the wheels could be impaired.
WARNING
Page 316 of 346

315
WARNING
LIGHTS AND
MESSAGES
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
ADVICE FOR PRESERVING THE BODYWORK
Paint
Paintwork does not only serve an aestethic purpose,
but also protects the underlying sheet metal.
In the case of deep scrapes or scores, you are
advised to have the necessary touching up carried
out immediately to avoid the formation of rust. Use
only original paint products for touching up (see
“Bodywork paint identification plate” in section
“Technical specification”).
Normal paint maintenance consists in washing at
intervals depending on the conditions and
environment of use. For example, in highly polluted
areas, or if the roads are sprayed with salt, it is wise
to wash the car more frequently.
To correctly wash the car:
❒remove the aerial from the roof to prevent
damage to it if the car is washed in an automatic
system;
❒wash the body using a low pressure jet of water;
❒wipe a sponge with a slightly soapy solution over
the bodywork, frequently rinsing with the
sponge;
❒rinse well with water and dry with a jet of air or
a chamois leather.
When drying, take particular care with the less
visible parts like door surrounds, bonnet and
around the headlights where water may stagnate.
The car should not be taken to a closed area
immediately, but left in the open so that residual
water can evaporate.
Do not wash the car after it has been left in the sun
or with the bonnet hot: this may alter the shine of
the paintwork.
Exterior plastic parts must be cleaned in the same
way as the rest of the vehicle.
Where possible, do not park under trees; the
resinous substance many species release give the
paint a dull appearance and increase the possibility
of triggering rust processes.
IMPORTANT Bird droppings must be washed off
immediately and thoroughly as the acid they
contain is particularly aggressive.
Detergents cause water pollution. Therefore the car should be washed in areas equipped for
collecting and purifying the liquid used in the washing process.
Page 329 of 346

COLD TYRE INFLATION PRESSURE (bar)
328
WARNING
LIGHTS AND
MESSAGES
INDEX
DASHBOARDAND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
STANDARD TYRES
Size Medium load Full load
Front Rear Front Rear
185/65 R14 86T 2,2 2,1 2,3 2,3
195/60 R15 88T 2,2 2,1 2,3 2,3
205/50 R16 87V 2,2 2,1 2,3 2,3
135/80 B14 84M 2,8SPARE WHEEL
125/80 R15 95M 4,2
Add +0.3 bar to the prescribed inflation pressure when the tyres are warm. Recheck pressure value with cold tyres.
With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres.
Page 341 of 346

340
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
DASHBOARDAND CONTROLS
INDEX
Suspensions ......................... 324
Symbols .............................. 8
Technical specifications.. 318
Third brake light
– bulb replacement ........... 276
Towing the car..................... 287
Towing trailers .................... 203
T.P.M.S. (system)................. 145
Transmission ....................... 323
Transporting children
safely ................................. 165
Tyre Pressure Monitoring
System (T.P.M.S.) .............. 145
Ty r e s
– correct tyre reading......... 325
– snow tyres....................... 327
– standard ......................... 327
Using the Dual FuNction System
gearbox ............................. 189
Warning lights and
messages.......................... 209
Weights ............................... 331Wheel
– changing ........................ 261
– spare wheel ..................... 327
Wheel geometry .................. 325
Windows (cleaning) ............. 316
Windscreen washer
– control ............................ 104
– fluid level ....................... 302
Windscreen wiper
– blades ............................ 311
– control ........................... 104
– nozzles ............................ 313
– smart washing ............... 105
Page 345 of 346

ENGINE OIL CHANGE COLD TYRE INFLATION PRESSURE (bar)
STANDARD TYRES
Size Medium load Full load
Front Rear Front Rear
FUEL CAPACITIES (litres)
1.48V - 1.416V1.3 Multijet 1.9 Multijet
Tank capacity 47 47 47
Reserve 5 - 7 5 - 7 5 - 7
Refuel petrol engines with unleaded petrol with an octane rating (RON) no lower than 95 only.
Refuel diesel engines with diesel fuel for motor vehicles (EN590 specifications) only.
Fiat Auto S.p.A.
Quality - Assistenza Tecnica - Ingegneria Assistenziale
Largo Senatore G. Agnelli, 5 - 10040 Volvera - Torino (Italia)
Print no. 603.81.169 - 01/2007 - 1
stedition
1.418V1.416V1.3 Multijet 1.9 Multijet
litres kg litres kg litres kg litres kg
Engine sump 2.4 2.1 2.5 2.2 2.85 2.5 4.2 3.75
Engine sump and filter 2.62.25 2.7 2.35 3.0 2.6 4.4 3.9
185/65 R14 86T 2,2 2,1 2,3 2,3
195/60 R15 88T 2,2 2,1 2,3 2,3
205/50 R16 87V 2,2 2,1 2,3 2,3
135/80 B14 84M 2,8SPARE WHEEL
125/80 R15 95M 4,2
Add +0.3 bar to the prescribed inflation pressure when the tyres are warm. Recheck pressure value with cold tyres.
With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres.