oil Lancia Musa 2009 Owner handbook (in English)

USE OF ENVIRONMENT-FRIENDLY MATERIALS
None of the components installed on LANCIA Musa contains asbestos. The padding and air conditioning system are
CFC-free (Chlorofluorocarbons), these gases being reliable for the depletion of the ozone layer. Dying agents and anti-
corrosion coating of the bolts and screws no longer contain cadmium, which pollutes the air and waterbeds.
EMISSION-REDUCING DEVICES (petrol engines)
Three-way catalytic converter (catalytic converter)
The exhaust system features a catalyst made with alloys of noble metals. It is installed in a stainless steel housing which
is resistant to high operating temperatures.
The catalyst converts the unburnt hydrocarbons, carbon oxide and nitrogen oxides that are present in the exhaust gases
(although in small quantities thanks to electronic injection ignition systems) into non-polluting compounds.
As the catalytic converter reaches high temperatures during car operation, we recommend that the car should not be
parked on materials that may pose a risk of flammability (e.g. paper, fuel oils, dry grass or leaves, etc.).
Lambda sensors
These sensors (Lambda) detect the oxygen content in the exhaust gases. Lambda sensors produce a signal which is
used by the electronic control unit of the injection and ignition system for regulating the air-fuel mix.
Fuel evaporation system
Even when the engine is not running, it is not possible to prevent the formation of petrol vapours. For this reason, a
system has been developed to “catch” these vapours in a special activated carbon vessel.
While the engine is running, these vapours are aspirated and delivered to combustion.
001-006 MUSA 1ed GB 10-07-2008 9:36 Pagina 3

33
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Adjusting the button volume
(Button Vol.)
This function enables setting the vol-
ume of the roger-beep accompanying
the activation of buttons MODE,+
and–according to 8 levels.
To adjust the desired volume proceed
as follows:
– briefly press button MODE: the pre-
viously set volume “level” starts flash-
ing on the display;
– press button +or–to set the volume
level;
– briefly press button MODEto go
back to the menu screen or press the
button for a prolonged time to go
back to the standard screen without
storing the settings.
S.B.R. buzzer reactivation
(Belt Buzzer) (where provided)
This function can only be displayed
after Lancia Dealership has deacti-
vated the S.B.R. system (see para-
graph “S.B.R. system” in section
“Safety devices”).The indications will appear more fre-
quently when there are 200 km left.
For 1.3 Multijet versions refer to the
instructions provided in the “Sched-
uled Servicing Plan” in section “Car
Maintenance” for air filter, engine oil
and engine oil filter replacement. The
indication will appear in kilometres or
miles according to the unit settings.
When the next scheduled servicing is
near, the message “Service” will ap-
pear on the display followed by the
number of kilometres or miles or days
left before servicing when the key is
turned to MAR. The “Scheduled Ser-
vicing” message shows information in
either kilometres (km) or miles (mi)
or in days (dd) depending on the
deadline showing up first. Go to the
Lancia Dealership where the servic-
ing operations envisaged in the
“Scheduled Service Plan” or “Yearly
Inspection Plan” will be performed
and the message will be reset. Scheduled Servicing (Service)
This function enables viewing of in-
formation on proper car servicing de-
pending on the kilometres travelled or
daily intervals.
This information is consulted as fol-
lows:
– briefly press button MODE: the dis-
play shows service requirements in
km or mi according to the previous
setting (see paragraph “Distance
unit”);
– press button +or–to view the ser-
vice interval in days;
– briefly press button MODEto go
back to the menu screen or press the
button for a prolonged time to go back
to the standard screen.
NOTE According to the “Scheduled
Servicing Plan” the car must be ser-
viced every 20,000 km (or equivalent
mileage) or on a yearly basis. This
message appears automatically when
the key is positioned on MARafter
travelling for 2,000 km (or equivalent
mileage) or 30 days after the dead-
line. It appears every 200 km (or
equivalent mileage) or 3 days.
007-037 MUSA 1ed GB 10-07-2008 9:36 Pagina 33

SUN VISORS
These are arranged at the sides of the
internal rearview mirror. They may be
oriented frontally and to the side.
On certain versions, a courtesy mirror
can be applied to the back of the sun
visor.
To use the mirror, open the sliding
doorA-fig. 100(where provided).
SUNROOF
(where provided)
Sunroof is fitted with anti-crushing
safety system that detects the presence
of an obstacle during sunroof closing
stroke and that cuts in by stopping
and reversing the sunroof stroke. The
“skydome” sunroof is made of 2 glass
panels, one fixed and the other mov-
able, equipped with manually oper-
ated two-position (open/closed) sun
curtains. The sunroof can be operated
only when the ignition key is on MAR.
The opening/closing functions are
controlled by the button located near
the front light.
To open
Press and keep pressed button B-fig.
101, the front pane will set to the
“spoiler” position; press button
Bagain for over half a second to make
the sunroof sliding automatically to
the wide open position; press the but-
ton to stop the sunroof at an interme-
diate position.
76
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
fig. 99L0D0096m
fig. 100L0D0097m
The cigar lighter becomes
very hot. Handle with care.
The device must not be used by chil-
dren: risk of fire and/or burns.
WARNING
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 76

EMERGENCY
OPENING/CLOSING
If the switch does not work, the sun-
roof can be operated manually as fol-
lows:
❒remove the protection cap set be-
tween the two sun curtains;
❒take the Allen wrench provided
❒fit the wrench into A-fig. 102and
turn it:
– clockwise to open the sunroof
– counter-clockwise to close the
sunroof. To close
When in wide open position, press
buttonA-fig. 101for over half a sec-
ond to set the front pane to the
“spoiler” position; press the button
again to stop the sunroof at an inter-
mediate position; press button Aagain
and keep it pressed to close the sun-
roof completely.
77
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
fig. 101L0D0098mfig. 102L0D0099m
If a cross roof rack is fitted,
the sunroof should be used
in the “spoiler” position only.
Do not open the sunroof with
snow or ice to avoid dam-
age.
Always remove the ignition
key when you get out of the
car to prevent the sunroof being op-
erated accidentally and constituting
a danger to the people left in the car.
The improper use of the sunroof can
be dangerous. Before and during its
operation ensure that any passengers
are not at risk from the moving roof
either by personal objects getting
caught in the mechanism or by be-
ing injured by it directly.
WARNING
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 77

80
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
TAILGATE CLOSING
Lower the tailgate by using handleA-
fig. 108as shown in the figure, then
press the tailgate until a lock click is
heard.
IMPORTANT If the “Key” option is
enabled, before closing the tailgate
ensure that you have the ignition key
with you, as the tailgate will be auto-
matically locked.BOOT
The tailgate can only be unlocked
from outside the car by using the elec-
tric opening handle A-fig. 106.
The tailgate can be opened at any
time if car doors are unlocked.
From the set-up menu of the display
located on the instrument panel (see
“Reconfigurable multifunctional dis-
play” in this section) it is possible to
enable the “Key” option in this way,
the boot is not unlocked together with
the doors; press button
Rof the re-
mote control to open.
Tailgate opening is indicated by dou-
ble flashing of direction indicators.
fig. 106L0D0390m
fig. 107L0D0378m
fig. 108L0D0391m
Do not fit additional objects
onto the rear window shelf
or tailgate (speakers, spoil-
ers, etc.) except when con-
templated by the manufacturer to en-
sure the correct operation of the side
gas shock absorbers of the tailgate it-
self.
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 80

88
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
ACCESSORIES
PURCHASED BY
THE OWNER
If after buying the car, you decide to
install electrical accessories that re-
quire a permanent electric supply
(sound system, satellite antitheft sys-
tem, etc.) or accessories that in any
case burden the electric supply, con-
tact a Lancia Dealership, whose qual-
ified personnel, besides suggesting the
most suitable devices belonging to
Lineaccessori Lancia, will also evalu-
ate the overall electric absorption,
checking whether the car’s electric
system is able to withstand the load
required, or whether it needs to be in-
tegrated with a more powerful bat-
tery. SET-UP FOR MOBILE PHONE
(where provided)
The combined mobile phone and CD
or CD MP3 sound system set-up con-
sists of:
❒dual function antenna (sound sys-
tem + mobile telephone 900/1800
MHz), located on the roof of the
car;
❒connecting wires to the dual func-
tion antenna and wiring with 10-
way connector.
The connector is located between the
steering column and the central box.
The Customer is responsible
for the purchasing of the
hands-free kit as it must be
compatible with his/her own
mobile phone. It is advisable to install
the microphone near to the front light.
The maximum power ap-
plicable to the antenna is
20W.
WARNING
For the installation of the
mobile phone and its con-
nection to the set-up existing in the
car, contact a Lancia Dealership so
as to provide for any possible prob-
lems that could damage the safety of
the car.
WARNING
Be very careful when fitting
non-standard additional
spoilers, light alloy wheels or wheel
caps: they could reduce brake ven-
tilation and consequently brake ef-
ficiency in the case of repeated, vio-
lent braking or on long downhill
roads. Ensure that nothing (e.g. rub-
ber mats) obstructs the stroke of the
pedals.
WARNING
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 88

118
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
CONTAINING
RUNNING COSTS
Here are some suggestions which may
help you to keep the running costs of
your car down and lower the amount
of toxic emissions released into the at-
mosphere.
GENERAL CONSIDERATIONS
Car maintenance
Have checks and adjustments carried
out in accordance with the “Service
schedule”.
Tyres
Check tyre pressure regularly at least
once every four weeks: excessively low
pressure will increase consumption
because rolling resistance will be
higher.
Unnecessary loads
Do not travel with an overloaded
boot. The weight of the car (especially
when driving in town) and its trim
greatly affect consumption and sta-
bility.Roof rack/ski rack
Remove the roof rack or the ski rack
from the roof after use. These acces-
sories decrease aerodynamic penetra-
tion of the car and have a negative ef-
fect on consumption. It is better to use
a trailer to transport particularly
bulky objects.
Electric devices
Use electric devices only for the
amount of time needed. Rear heated
window, additional headlights, wind-
screen wipers and heater fan need a
considerable amount of energy, there-
fore increasing the requirement of
current increases fuel consumption
(up to +25% in the urban cycle).
Climate control
The climate control system requires
higher fuel consumption (up to +20%
in average): use the air vents when the
external temperature allows to.
Spoilers
The use of non-certified aerodynamic
items may adversely affect air drag
and consumption levels.DRIVING STYLE
Starting
Do not warm the engine up with the
car standing: the engine warms up
very slowly in these conditions, in-
creasing consumption and emissions.
It is advisable to start off immediately
and slowly keeping the engine speed
down: the engine will warm up much
faster this way.
Unnecessary actions
Avoid revving up when starting at
traffic lights or before stopping the
engine. The latter action, like dou-
bling the clutch, is unnecessary and
causes increase of consumption and
pollution.
Gear selection
Use a higher gear as soon as traffic
and road conditions allow. Using a
low gear for faster acceleration will in-
crease consumption.
In the same way improper use of a
high gear increases consumption,
emissions an engine wear.
113-124 MUSA 1ed GB 10-07-2008 9:37 Pagina 118

125
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
WARNING LIGHTS AND MESSAGES
GENERAL WARNINGS..................................... 126
LOW BRAKE FLUID......................................... 126
HANDBRAKE ON.............................................. 126
AIRBAG FAILURE............................................ 126
HOT ENGINE COOLANT................................. 127
LOW BATTERY CHARGE................................ 127
LOW ENGINE OIL PRESSURE .......................... 128
EXHAUSTED OIL ............................................ 128
“DUALDRIVE” ELECTRIC
POWER STEERING FAILURE ........................ 128
INCOMPLETE DOOR LOCKING...................... 128
SEAT BELTS NOT FASTENED ........................... 128
EBD SYSTEM FAILURE................................... 129
INJECTION SYSTEM FAILURE........................ 129
EOBD ENGINE CONTROL
SYSTEM FAILURE .......................................... 129
FRONT PASSENGER AIRBAG DEACTIVATED 130
ABS SYSTEM FAILURE.................................... 130
FUEL RESERVE............................................... 130
GLOW PLUG HEATING.................................. 131
GLOW PLUG HEATING FAILURE................... 131
WATER IN DIESEL FUEL FILTER.................. 131LANCIA CODE PROTECTION
SYSTEM FAILURE........................................... 131
REAR FOG LIGHTS.......................................... 131
GENERIC FAILURE INDICATION ................... 132
BRAKE PAD WEAR ......................................... 133
PARTICULATE TRAP CLOGGED ................... 133
TAIL LIGHTS AND LOW BEAMS..................... 133
FOLLOW ME HOME........................................ 133
FRONT FOG LIGHTS ...................................... 133
LEFT-HAND DIRECTION INDICATOR............ 134
RIGHT-HAND DIRECTION INDICATOR.......... 134
“DUALDRIVE” ELECTRIC
POWER STEERING ......................................... 134
CRUISE CONTROL .......................................... 134
MAIN BEAM HEADLIGHTS.............................. 134
POSSIBLE ICE ON THE ROAD ........................ 134
LIMITED RANGE ............................................. 134
125-134 MUSA 1ed GB 10-07-2008 9:38 Pagina 125

128
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
LOW ENGINE OIL
PRESSURE (red)
EXHAUSTED OIL (red)
(Multijet versions with DPF)
Low engine oil pressure
When the ignition key is moved to
MAR, the warning light turns on and
should go out as soon as the engine is
started.
The display will show the dedicated
message.
v
Exhausted oil
The warning light turns on and
flashes along with the message on the
display when the system detects that
the engine oil is exhausted.
After the first indication, at each en-
gine start-up, the warning light
vcontinues to flash for about 60 sec-
onds and then every 2 hours until the
oil is changed.
If the warning light vturns on when the car is
travelling (on certain versions to-
gether with the message on the dis-
play) stop the engine immediately
and contact Lancia Dealership.
WARNING
If the warning light vflashes, promptly contact
Lancia Dealership in order to have
the oil changed and the warning
light on the instrument panel turned
off.
WARNING
“DUALDRIVE”
ELECTRIC POWER
STEERING FAILURE
(red)
When the ignition key is moved to
MAR, the warning light turns on and
should go off after a few seconds.
If the warning light stays on, the elec-
tric steering system provides no assis-
tance and the effort on the steering
wheel is increased, although steering
is still possible. In this case, go to a
Lancia Dealership.
The display will show the dedicated
message.
g
INCOMPLETE DOOR
LOCKING (red)
On certain versions the
warning light turns on when
one or more doors or the tailgate are
not properly closed.
The display will show the dedicated
message.
A buzzer is triggered when doors/tail-
gate are open and the car is moving.
´
SEAT BELTS NOT
FASTENED (red)
(where provided)
The warning light on the dis-
play lights up when the car is moving
and the driver’s seat belt is not cor-
rectly fastened. The warning light
flashes, and a buzzer is triggered, if
the driver’s seat belt is not correctly
fastened. The buzzer of the S.B.R.
(Seat Belt Reminder) system can be
disabled by the Lancia Dealership
only. The system can be enabled from
the “setup” menu.
<
125-134 MUSA 1ed GB 10-07-2008 9:38 Pagina 128

132
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
GENERAL FAILURE
INDICATION
(amber)
The warning light turns on in
the following circumstances.
Externallight failure
The warning light comes on (on some
versions only) when a failure is de-
tected in one of the following lights:
– tail lights
– stop lights (excluding 3
rdstop)
– rear fog lights
– direction indicators
– plate lights.
The fault identified in the lights above
may be due to: one or more burnt
lamps, a blown protection fuse or in-
terruption of the electrical connection.
The display will show the dedicated
message.
è
Fresh air filter clogged
(where provided)
The warning light turns on when the
particulate filter is clogged and the
driving conditions do not enable au-
tomatic activation of the regeneration
procedure.
To allow the regeneration procedure,
keep the car running until the warn-
ing light turns off.
The display will show the dedicated
message.
Engine oil pressure sensor failure
The warning light turns on when a
failure is detected in the engine oil
pressure sensor. Go to a Lancia Deal-
ership as soon as possible.Twilight/rain sensor failure
The warning light turns on when a
failure is detected in the twilight/rain
sensors. Go to a Lancia Dealership as
soon as possible.
The display will show the dedicated
message.
Fuel cut-off switch tripped
The warning light comes on when the
fuel cut-off switch trips.
The display will show the dedicated
message.
Speed limit exceeded
The display shows the dedicated mes-
sage when the car exceeds the set
speed limit (see “Multifunction Dis-
play” in section “Dashboard and con-
trols”).
125-134 MUSA 1ed GB 10-07-2008 9:38 Pagina 132