check engine LAND ROVER FRELANDER 2 2006 User Guide

DT CDescriptionPossible CauseAction
P0072-00Ambient Air Temperat ureSens or Circui t Low - No s ubt ype i nformati on
• NO TE: - I_A_IATS -
Ambi ent ai r temperat ures ensor circui t s hort ci rcuitt o ground, open ci rcuit
Refer to the el ect ri cal circui t diagramsand check ambient air t emperat uresens or ci rcuit - I_A_IATS - For s hortci rcuit t o ground, open ci rcuitCarry out t he pinpoint t est s as s oci at edwit h t his DTC us ing the manufact urerapproved di agnos ti c s ys t em
P0073-00Ambient Air Temperat ureSens or Circui t High - No s ubt ype i nformati on
• NO TE: - I_A_IATS -
Ambi ent ai r temperat ures ensor circui t s hort ci rcuitt o powerAmbi ent ai r temperat ures ensor faul t
Refer to the el ect ri cal circui t diagramsand check ambient air t emperat uresens or ci rcuit - I_A_IATS - For s hortci rcuit t o power
P0087-00Fuel Rail /Sys tem Pres s ure -Too Low - No sub t ypeinformat ion
• NO TE: - Ci rcuit I_A_RALPS -
Fuel rail pres s ure sens orcircui t s hort ci rcuit t oground, s hort circuit t opower, open circui t, highresi st anceFuel st arvati onFuel lines l eaki ngFuel lines rest ri ctedBl ocked air fil ter
Refer to the el ect ri cal circui t diagramsand check t he fuel rai l press ure s ens orci rcuit for short ci rcuit t o ground, s hortci rcuit t o power, open circui t, highres is t anceCheck t he fuel li nes for any s igns ofleakage, repl ace as requiredCheck t he fuel li nes for any s igns ofdamage, cri mping or rest ri ct ions , replaceas requiredCheck for bl ocked air fil ter, replace asrequired
P0087-21Fuel Rail /Sys tem Pres s ure -Too Low - Signal ampli tude • NO TE: - Ci rcuit I_A_RALPS -
Fuel rail pres s ure sens orcircui t s hort ci rcuit t oground, s hort circuit t opower, open circui t, highresi st anceFuel st arvati onFuel lines l eaki ngFuel lines rest ri ctedBl ocked air fil ter
Refer to the el ect ri cal circui t diagramsand check t he fuel rai l press ure s ens orci rcuit for short ci rcuit t o ground, s hortci rcuit t o power, open circui t, highres is t anceCheck t he fuel li nes for any s igns ofleakage, repl ace as requiredCheck t he fuel li nes for any s igns ofdamage, cri mping or rest ri ct ions , replaceas requiredCheck for bl ocked air fil ter, replace asrequired
P0087-22Fuel Rail /Sys tem Pres s ure -Too Low - Signal ampli tude >maximum
• NO TE: - Ci rcuit I_A_RALPS -
Fuel rail pres s ure sens orcircui t s hort ci rcuit t oground, s hort circuit t opower, open circui t, highresi st anceFuel st arvati onFuel lines l eaki ngFuel lines rest ri ctedBl ocked air fil ter
Refer to the el ect ri cal circui t diagramsand check t he fuel rai l press ure s ens orci rcuit for short ci rcuit t o ground, s hortci rcuit t o power, open circui t, highres is t anceCheck t he fuel li nes for any s igns ofleakage, repl ace as requiredCheck t he fuel li nes for any s igns ofdamage, cri mping or rest ri ct ions , replaceas requiredCheck for bl ocked air fil ter, replace asrequired
P0087-23Fuel Rail /Sys tem Pres s ure -Too Low - Signal s tuck low• NO TE: - Ci rcuit I_A_RALPS -
Fuel rail pres s ure sens orcircui t s hort ci rcuit t ogroundFuel st arvati onFuel lines l eaki ngFuel lines rest ri ctedBl ocked air fil ter
Refer to the el ect ri cal circui t diagramsand check t he fuel rai l press ure s ens orci rcuit for short ci rcuit t o groundCheck t he fuel li nes for any s igns ofleakage, repl ace as requiredCheck t he fuel li nes for any s igns ofdamage, cri mping or rest ri ct ions , replaceas requiredCheck for bl ocked air fil ter, replace asrequired
P0088-00Fuel Rail /Sys tem Pres s ure -Too High - No s ub typeinformat ion
• NO TE: - Ci rcuit I_A_RALPS -
Fuel rail pres s ure sens orcircui t s hort ci rcuit t opowerFuel st arvati onFuel lines l eaki ngFuel lines rest ri ctedBl ocked air fil ter
Refer to the el ect ri cal circui t diagramsand check t he fuel rai l press ure s ens orci rcuit for short ci rcuit t o powerCheck t he fuel li nes for any s igns ofleakage, repl ace as requiredCheck t he fuel li nes for any s igns ofdamage, cri mping or rest ri ct ions , replaceas requiredCheck for bl ocked air fil ter, replace asrequired
P0088-21Fuel Rail /Sys tem Pres s ure -Too High - Si gnal ampl it ude< minimum
• NO TE: - Ci rcuit I_A_RALPS -
Fuel lines rest ri ctedPres s ure control val vecircui t s hort ci rcuit t opowerPres s ure control val ve
Usi ng t he manufacturer approveddiagnos t ic s yst em, check engine controlmodul e, for rel ated DTCs and refer t othe relevant DTC indexCheck t he fuel li nes for any s igns ofdamage, cri mping or rest ri ct ions , replaceas required

Publi shed: 20-Jul-2011
General Information - Diagnostic Trouble Code (DTC) IndexI6 3.2L Petrol,
DTC: Engine Control Module (ECM)
Des cript ion and Operat ion
• NOTE: If a cont rol module or component i s s uspect and the vehicl e remai ns under manufacturer warrant y, refer t o t heW arranty Pol icy and Procedures manual (s ect ion B1.2), or determine i f any pri or approval program is i n operat ion, beforet he replacement of a component.
• NOTE: Generic scan t ool s may not read the codes li st ed, or may read only 5-digi t codes . Match t he 5 digi ts from t he s cant ool t o t he fi rs t 5 di gi ts of the 7-digit code li s ted t o i dent ify the fault (the last 2 digi ts gi ve ext ra informati on read by themanufacturer-approved di agnos ti c s ys t em).
• NOTE: W hen performing volt age or res is t ance t est s , always use a digi tal mult imeter (DMM) accurat e t o t hree deci malplaces, and wi th an up-t o-date cal ibrat ion cert ificate. W hen tes ti ng res is t ance al ways take t he res is t ance of t he DMMleads i nt o account .
• NOTE: Check and recti fy bas ic faul ts before beginni ng diagnos t ic rout ines i nvol vi ng pinpoint t es t s.
• NOTE: Ins pect connect ors for s igns of water ingres s , and pins for damage and/or corros ion.
• NOTE: If di agnos t ic t rouble codes are recorded and, after performi ng t he pinpoi nt tes t s, a fault i s not pres ent , anint ermi tt ent concern may be the caus e. Al ways check for l oos e connect ions and corroded t erminals .
Des cript ion And Operat ion
For a detail ed descripti on of the El ect ronic engi ne cont rol s ys t em, refer t o t he relevant Des cript ion and Operat ion secti onin the workshop manual.For addit ional informat ion, refer t o: Electroni c Engi ne Control s (303-14A Electroni c Engi ne Controls- I6 3.2L Pet rol, Des cri pt ion and Operati on).
Powertrain control module petrol (PC MP) SI6 petrol engineDT CDescriptionPossible CauseAction
B1024-00Start cont rol unit - Nos ub type i nformati onStart er rel ay si gnal circui t:short ci rcuit t o groundStart er rel ay si gnal circui t:short ci rcuit t o powerStart er rel ay si gnal circui t:open ci rcuitStart er rel ay fault
Check t he st art er rel ay and ci rcuit s. Refer tot he elect rical guides. Ins tall a new rel ay asnecess ary
B1024-82Start cont rol unit -Ali ve/s equencecount er incorrect/notupdat ed
Cont rol ler area net work(CAN) circui t: open circui tCAN circui t: s hort circui t togroundCAN circui t: s hort circui t topower
Check t he CAN circui t. Refer t o t he electricalgui des . Rect ify as neces s ary
B1024-86Start cont rol unit -Signal inval idCont rol ler area net work(CAN) circui t: open circui tCAN circui t: s hort circui t togroundCAN circui t: s hort circui t topower
Check t he CAN circui t. Refer t o t he electricalgui des . Rect ify as neces s ary
B10A2-68Cras h i nput - Eventinformat ionEvent informat ionThe cont rol module hasregis t ered t hat t he vehiclehas been i n a coll is ion
Cl ear t he DTC. Check/recti fy any damageres ul ti ng from the coll is ion
P0011-00Int ake (A) cams haftposi ti on t imi ng -Over-advanced (bank1) - No s ub t ypeinformat ion
Poor engine oi lqual it y/condi ti onVariable val ve ti mi ng (VVT)sol enoi d/circui t faultVVT unit faul t
Check for related DTC's. Check t he engi ne oilquali ty/condit ion. Check t he VVT s olenoid andci rcuit s. Refer t o t he electrical gui des . Inst alla new VVT unit as requi red
P0012-00Int ake (A) cams haftposi ti on t imi ng -Over-ret arded (bank 1)- No s ub t ypeinformat ion
Poor engine oi lqual it y/condi ti onLow engi ne oil pres s ureVariable val ve ti mi ng (VVT)sol enoi d/circui t faultVVT unit faul t
Check for related DTC's. Check t he engi ne oilquali ty/condit ion. Check t he engine oi lpress ure. Check the VVT sol enoi d andci rcuit s. Refer t o t he electrical gui des . Inst alla new VVT unit as requi red
P0012-68Int ake (A) cams haftposi ti on t imi ng -Over-ret arded (bank 1)- Event i nformati on
Poor engine oi lqual it y/condi ti onLow engi ne oil pres s ureVariable val ve ti mi ng (VVT)uni t fault- camshaft res et val ve
Check t he engi ne oil qual it y/condi ti on. Checkt he engine oi l press ure. Check the VVT uni t.Ins tall a new VVT unit as requi red
P0016-00Cranks haft pos i ti on -Cams haft posi ti oncorrel ati on - Bank 1s ens or A - No s ub typeinformat ion
Poor engine oi l quali tyCamshaft inlet s ensorincorrect ly i ns t alledCrankshaft pos it ion sens orincorrect ly i ns t alled
Check t he engi ne oil qual it y/condi ti onRefer to t he relevant s ecti ons of t heworkshop manual and check t he camshafti nlet s ens or for correct i nst all ati on, check t hecranks haft posi ti on s ens or for correct

DT CDescriptionPossible CauseAction
Camshaft inlet s ensor, s hortci rcuit t o ground, s hortci rcuit t o power, open circui t,high res i st anceCamshaft inlet s ensorair-gap t o t arget rot orgreater t han specificati onExces si ve run out on t argetrot orLoos e vari abl e valve t imi ngact uat or chai n dri ve ortens ionersDamaged, worn ti mi ng chain
i nst all ati onRefer to el ect ri cal circui t diagrams and checkt he cams haft inl et sens or ci rcuit for s hortci rcuit t o ground, short ci rcuit t o power, openci rcuit , hi gh res is t anceRefer to t he relevant s ecti ons of t heworkshop manual and check t he camshafti nlet s ens or for correct ai r-gap to target rotors pacing, check target run out is tos pecifi cat ion, check vari abl e valve t imingact uat or chain drive or t ensi oners areoperat ing t o s peci fi cat ion
P0018-00Cranks haft pos i ti on -Cams haft posi ti oncorrel ati on - Bank 2s ens or A - No s ub typeinformat ion
Poor engine oi lqual it y/condi ti onIncorrect ly adjus t edcams haft sDamaged (worn) ti mingchainVariable val ve ti mi ng (VVT)sol enoi d/circui t faultVVT unit faul t
Check t he engi ne oil qual it y/condi ti on. Checkt he cams haft t imi ng and chai n. Recti fy asnecess ary. Check the VVT sol enoi d andci rcuit s. Refer t o t he electrical gui des Ins tal la new VVT unit as requi red
P001A-00Int ake (A) cam profi lecont rol circui t/open(bank 1) - No sub typeinformat ion
Camshaft profi le controlci rcuit : open ci rcuitCamshaft profi le controlci rcuit : s hort circuit t ogroundCamshaft profi le act uat orfault
Check t he cams haft profi le actuat or andci rcuit s. Refer t o t he electrical gui des . Recti fyas necess ary
P001B-00Int ake (A) cam profi lecont rol circui t low(bank 1) - No sub typeinformat ion
Camshaft profi le controlci rcuit : open ci rcuitCamshaft profi le controlci rcuit : s hort circuit t ogroundCamshaft profi le act uat orfault
Check t he cams haft profi le actuat or andci rcuit s. Refer t o t he electrical gui des . Recti fyas necess ary
P001C-00Int ake (A) cams haftprofile cont rol circuithigh (bank 1) - No s ubt ype i nformati on
Camshaft profi le controlci rcuit : s hort circuit t o powerCamshaft profi le act uat orfault
Check t he cams haft profi le actuat or andci rcuit s. Refer t o t he electrical gui des . Recti fyas necess ary
P001D-00Int ake (A) cam profi lecont rol circui t/open(bank 2) - No sub typeinformat ion
Camshaft profi le controlci rcuit : open ci rcuitCamshaft profi le controlci rcuit : s hort circuit t ogroundCamshaft profi le act uat orfault
Check t he cams haft profi le actuat or andci rcuit s. Refer t o t he electrical gui des . Recti fyas necess ary
P001E-00Int ake (A) cams haftprofile cont rol circuitlow (bank 2) - No s ubt ype i nformati on
Camshaft profi le controlci rcuit : open ci rcuitCamshaft profi le controlci rcuit : s hort circuit t ogroundCamshaft profi le act uat orfault
Check t he cams haft profi le actuat or andci rcuit s. Refer t o t he electrical gui des . Recti fyas necess ary
P001F-00Int ake (A) cams haftprofile cont rol circuithigh (bank 2) - No s ubt ype i nformati on
Camshaft profi le controlci rcuit : s hort circuit t o powerCamshaft profi le act uat orfault
Check t he cams haft profi le actuat or andci rcuit s. Refer t o t he electrical gui des . Recti fyas necess ary
P0021-00Int ake (A) cams haftposi ti on t imi ng overadvanced (bank 2) -No s ub t ypeinformat ion
Poor engine oi lqual it y/condi ti onVariable val ve ti mi ng (VVT)sol enoi d/circui t faultVVT unit faul t
Check for related DTC's. Check t he engi ne oilquali ty/condit ion. Check t he VVT s olenoid andci rcuit s. Refer t o t he electrical gui des . Inst alla new VVT unit as requi red
P0022-00Int ake (A) cams haftposi ti on t imi ng overret arded (bank 2) - Nos ub type i nformati on
Poor engine oi lqual it y/condi ti onLow engi ne oil pres s ureVariable val ve ti mi ng (VVT)sol enoi d/circui t faultVVT unit faul t
Check for related DTC's. Check t he engi ne oilquali ty/condit ion. Check t he engine oi lpress ure. Check the VVT sol enoi d andci rcuit s. Refer t o t he electrical gui des . Inst alla new VVT unit as requi red
P0031-00HO2S Heater controlcircuit low (bank 1,s ens or 1) - No s ubt ype i nformati on
HO2S heat er cont rol circui t:short ci rcuit t o groundHO2S heat er cont rol circui t:open ci rcuitHO2S faul t
Check t he HO2S and circuit s . Refer to theel ect ri cal guides . Ins tal l a new s ensor asrequi red

DT CDescriptionPossible CauseAction
U0100-00Lost Communi cat ion W it hECM/PCM "A" - no sub t ypeinformat ion
Los t communi cat ionwi th Engi ne Cont rolModule (ECM)
Refer to t he elect rical circuit di agrams andcheck the power and ground circui ts to t heEngine Cont rol Module (ECM). Us ing themanufact urer approved diagnos t ic s yst em,complet e a CAN network int egrit y t es t . Refert o t he electrical ci rcuit di agrams and checkt he CAN net work bet ween the Al l Terrai nCont rol Modul e (ATCM) and Different ialEl ect ronic Modul e (DEM).
U0121-00Lost Communi cat ion W it hAnti -Lock Brake Syst em(ABS) Control Modul e - nos ub type i nformati on
Los t communi cat ionwi th Ant i-Lock BrakeSys tem (ABS) module
Refer to t he elect rical circuit di agrams andcheck the power and ground circui ts to t heAnt i-Lock Brake Sys t em (ABS) modul e. Us i ngt he manufact urer approved di agnos ti cs ys tem, complet e a CAN net work int egrit yt es t. Refer t o t he electrical ci rcuit diagramsand check the CAN net work bet ween t he AllTerrain Cont rol Module (ATCM) andDi fferenti al El ect roni c Modul e (DEM).
U0138-00Lost Communi cat ion wi th AllTerrai n Control Modul e - nos ub type i nformati on
Los t communi cat ionwi th All Terrai n ControlModule (ATCM)
Refer to t he elect rical circuit di agrams andcheck the power and ground circui ts to t heAl l Terrai n Control Module (ATCM). Usi ng t hemanufact urer approved diagnos t ic s yst em,complet e a CAN network int egrit y t es t . Refert o t he electrical ci rcuit di agrams and checkt he CAN net work bet ween the Al l Terrai nCont rol Modul e (ATCM) and Different ialEl ect ronic Modul e (DEM).
U0140-00Lost Communi cat ion W it hBody Cont rol Module - nos ub type i nformati on
Los t communi cat ionwi th Cent ral Junct ionBox (CJB)
Refer to t he elect rical circuit di agrams andcheck the power and ground circui ts to t heCent ral Juncti on Box (CJB). Usi ng themanufact urer approved diagnos t ic s yst em,complet e a CAN network int egrit y t es t . Refert o t he electrical ci rcuit di agrams and checkt he CAN net work bet ween the Cent ralJunct ion Box (CJB) and Different ial Electroni cModule (DEM).
U0300-00Int ernal Cont rol ModuleSoft ware Incompat ibi lit y - nos ub type i nformati on
Hi gh s peed CANcommunicati on buscircui t problemInval id confi gurati onmes s age is recei ved
Us i ng the manufact urer approved diagnos t ics ys tem, complet e a CAN net work int egrit yt es t. Refer t o t he electrical ci rcuit diagramsand check the CAN net work to theDi fferenti al El ect roni c Modul e (DEM).Refer to t he elect rical circuit di agrams andcheck the power and ground circui ts to t hemodul e. Us i ng the manufact urer approveddi agnos ti c s ys t em, compl ete a CAN net worki ntegri ty tes t. Refer to t he elect rical circuitdi agrams and check t he CAN net workbet ween the Cent ral Juncti on Box (CJB) andDi fferenti al El ect roni c Modul e (DEM). Cleart he DTC and re-t es t.
U0300-4AInt ernal Cont rol ModuleSoft ware Incompat ibi lit y -incorrect componentins t al led
Di fferenti al El ect ronicModule (DEM) mi s si ngcali brati on, corrupts oft wareIncorrect Different ialElect ronic Module(DEM) ins tal led t ovehicle
Us i ng the manufact urer approved diagnos t ics ys tem check and i ns t all lat est relevant l evelof s oft ware to the Di fferenti al El ect ronicModule (DEM). Clear the DTC and re-tes t .Check and ensure t he correct Different ialEl ect ronic Modul e (DEM) i s i ns t alled. Checkand i nst all a new Different ial Electroni cModule (DEM) as requi red. Refer t o t heW arrant y Poli cy and Procedures manual , ordet ermi ne if any prior approval programme i si n operat ion, prior t o t he ins t al lat ion of anew modul e/component .
U0401-68Invali d Dat a Recei ved FromECM/PCM - event i nformat ionInval id dat a receivedCheck Engi ne Control Module (ECM) forrelat ed DTCs and refer t o t he rel evant DTCIndex. Cl ear t he DTC and re-t est .
U0415-00Invali d Dat a Recei ved FromAnti -Lock Brake Syst em(ABS) Control Modul e - nos ub type i nformati on
Inval id dat a receivedfrom Anti -Lock BrakingSys tem (ABS) module
Check Anti Lock Braking Sys tem (ABS)modul e for related DTCs and refer t o t herelevant DTC Index. Clear the DTC andre-t es t.
U0418-68Invali d Dat a Recei ved FromBrake Sys tem Cont rol Module- event i nformati on
Inval id dat a receivedfrom Anti -Lock BrakingSys tem (ABS) module
Check Anti Lock Braking Sys tem (ABS)modul e for related DTCs and refer t o t herelevant DTC Index. Clear the DTC andre-t es t.

DT C
Description Possible Cause Action
P073F-00 Unabl e t o engage gear 1 Cont act resi s tance in the
terminals Sol enoi ds st uck in t he on/off
pos it ion. Mechanical fault i n the
trans mi ss i on P0741-00
Torque convert er clutch
s ol enoi d circui t
performance/s tuck off Cont act resi s tance in the
terminals Torque convert er cl ut ch lock
up cont rol s ol enoi d (SLU)
ci rcuit : short ci rcuit t o ground Torque convert er cl ut ch lock
up cont rol s ol enoi d (SLU)
ci rcuit : short ci rcuit t o power Torque convert er cl ut ch lock
up cont rol s ol enoi d (SLU)
ci rcuit : open ci rcuit Torque convert er cl ut ch lock
up sol enoi d (SLU) s t uck i n off
pos it ion Int ernal t rans mi ss i on cont rol
modul e (TCM) fault Refer to the warrant y pol icy and procedures
manual i f the t rans mis s ion or t he TCM i s
sus pect .
P0742-00 Torque convert er clutch
s ol enoi d circui t st uck on Cont act resi s tance in the
terminals Torque convert er cl ut ch lock
up cont rol s ol enoi d (SLU)
ci rcuit : short ci rcuit t o ground Torque convert er cl ut ch lock
up cont rol s ol enoi d (SLU)
ci rcuit : short ci rcuit t o power Torque convert er cl ut ch lock
up cont rol s ol enoi d (SLU)
ci rcuit : open ci rcuit Torque convert er cl ut ch lock
up sol enoi d (SLU) s t uck i n on
pos it ion Int ernal t rans mi ss i on cont rol
modul e (TCM) fault P0744-68
Torque convert er clutch
s ol enoi d circui t
int ermi tt ent Engine st all ed Mechanical fault i n engi ne Carry out a compl ete read for related engi ne
DTCs . Recti fy as necess ary.
P074A-00 Unabl e t o engage gear 2 Cont act resi s tance in the
terminals Sol enoi ds st uck in t he on/off
pos it ion Mechanical fault i n the
trans mi ss i on Check t rans mis s ion flui d level and condit ion.
Refer to the warrant y pol icy and procedures
manual i f the t rans mis s ion is s us pect.
P074B-00 Unabl e t o engage gear 3 Cont act resi s tance in the
terminals Sol enoi ds st uck in t he on/off
pos it ion Mechanical fault i n the
trans mi ss i on P074C-00
Unabl e t o engage gear 4 Cont act resi s tance in the
terminals Sol enoi ds st uck in t he on/off
pos it ion Mechanical fault i n the
trans mi ss i on P074D-00
Unabl e t o engage gear 5 Cont act resi s tance in the
terminals Sol enoi ds st uck in t he on/off
pos it ion Mechanical fault i n the
trans mi ss i on P074E-00
Unabl e t o engage gear 6 Cont act resi s tance in the
terminals Sol enoi ds st uck in t he on/off
pos it ion Mechanical fault i n the
trans mi ss i on P0777-00
Pres s ure control s olenoid B
s tuck on Shi ft s olenoid No. 2 st uck in
the on pos it ion Refer to the warrant y pol icy and procedures
manual i f the t rans mis s ion is s us pect.

DT C
Description Possible Cause Action
P2800-00 Trans mis s ion range sens or
B circui t (PRNDL i nput ) Incorrect adjus tment of t he
gear s elector lever cabl e Int ernal t rans mi ss i on cont rol
modul e (TCM) fault Check t hat t he gear sel ect or lever cable is
correctl y adjus ted.
For addit ional informati on, refer t o: Sel ect or Lever Cabl e Adjus t ment (307-05 Aut omati c
Transmis s ion/Trans axle External Cont rols ,
General Procedures ).
Refer to the warrant y pol icy and procedures
manual i f the TCM is s us pect
P2801-00
Trans mis s ion range sens or
B circui t range/performance Incorrect adjus tment of t he
gear s elector lever cabl e Int ernal t rans mi ss i on cont rol
modul e (TCM) fault P2805-00
Trans mis s ion range sens or
A/B correl at ion Incorrect adjus tment of t he
gear s elector lever cabl e Int ernal t rans mi ss i on cont rol
modul e (TCM) fault U0001-00
High s peed cont rol ler area
network (CAN)
communicat ion bus CAN circuit : open circuit CAN circuit : s hort circui t to
each ot her CAN circuit : s hort circui t to
power CAN cont rol module fail ure Carry out a compl ete vehicle read for DTCs
indicati ng a CAN or module fault . Rect ify as
neces sary. Refer t o t he warranty pol icy and
procedures manual if a module i s s uspect.
U0100-00 Los t communicati on wi th
ECM "A" CAN circuit : open circuit CAN circuit : s hort circui t to
each ot her CAN circuit : s hort circui t to
power CAN cont rol module fail ure Carry out a compl ete vehicle read for DTCs
indicati ng a CAN or module fault . Rect ify as
neces sary. Refer t o t he warranty pol icy and
procedures manual if a module i s s uspect.
U0121-00 Cont rol ler area net work
(CAN) t rans mi ss ion cont rol
module ( TCM)/ant i-lock
brake s yst em (ABS) circuit
malfunct ion no
communicat ion CAN circuit : open circuit CAN circuit : s hort circui t to
each ot her CAN circuit : s hort circui t to
power CAN cont rol module fail ure Carry out a compl ete vehicle read for DTCs
indicati ng a CAN or module fault . Rect ify as
neces sary. Refer t o t he warranty pol icy and
procedures manual if a module i s s uspect.
U0300-00 Int ernal cont rol module
s oft ware i ncompat ibil it y Incorrect cont rol ler area
net work (CAN) configurat ion
ID
- incorrect
hardware/s oft ware level Check t hat t he modules are correct for the
vehicl e and that t he correct level of software is
ins tall ed. Reconfi gure t he CAN s yst em us i ng the
approved di agnos ti c s ys t em.
U0401-00 Invali d data recei ved from
engi ne cont rol module
(ECM) Incorrect s ignal from t he ECM Carry out a compl ete vehicle read for DTCs
indicati ng a cont rol ler area net work (CAN) or
ECM faul t. Recti fy as necess ary. Refer t o t he
warrant y poli cy and procedures manual if t he
ECM is sus pect .
U0415-00 Invali d data recei ved from
the ant i-lock brake s ys tem
(ABS) control modul e The engine cont rol module
(ECM) has t he wrong code for
the i mmobil izer The ABS modul e (brake
control modul e (BCM)) has
the wrong code for the
immobi lizer Transmis si on cont rol module
(TCM) faul t Reprogramme the modules as neces sary. Refer
to the warranty pol icy and procedures manual if
a module i s s uspect.
U2100-00 Ini ti al confi gurati on not
compl ete Cont roll er area network
(CAN) circui t fault Init ial cent ral confi gurati on
has never been sent Check for ot her controll er area network (CAN)
DTCs or apparent ly unrel at ed cust omer
compl ai nts . Carry out a complet e vehi cl e DTC
read. Check t he CAN circui ts . Refer t o t he
el ect ri cal guides . Rect ify as neces s ary. Clear
the DTCs and t es t for normal operat ion. Check
correct cent ral car confi gurati on s oftware i s
ins tall ed. Reprogramme t he module as
neces sary.
U2101-00 Cont rol module
configurat ion i ncompat ible Cent ral car confi gurati on
parameter mi ss i ng or
corrupted Check correct central car configurat ion s oft ware
is i nst all ed. Reprogramme t he module as
neces sary.
U2023-00 Engi ne t orque s ignal Cont roll er area network
(CAN) circui t (between
engine cont rol module (ECM)
and trans mi ss i on cont rol
modul e (TCM)): open ci rcuit CAN circuit (between ECM
and TCM): s hort circui t CAN module fault Carry out a compl ete read for related DTCs .
Rect ify as neces s ary. Check t he CAN circui ts .
Refer to the el ect ri cal guides . Rect ify as
neces sary.
U2105-11 Swit ch pack s i gnal "A" Shi ft l ock s olenoid ci rcuit
fault : s hort ci rcuit t o ground Gear s elector module (GSM)
fault Check t he GSM and circui ts . Refer t o t he
el ect ri cal guides . Rect ify as neces s ary. Refer to
the warrant y pol icy and procedures manual if
the GSM is s us pect .

ItemPart NumberDescription
1-Engine Type / Capacit y / Power2-Gros s Vehicle W eight
3-Gros s Train W eight
4-Occupancy5-Vehicle VIN Number
6-Buil d Date
VIN number - UK, EU and ROW (vehicles built up to 2010MY)
VIN PositionCharacterIdentifies1 - 3 - W orld ident ifierSALLand Rover (UK)
4 - Vehi cl e t ypeFFreelander 2
5 - Clas sAStandard6 - Body Type24 Door
6 - Body Type4Commercial
7 - Transmis s ion and St eering3RHD, Aut omat ic t rans mis s ion7 - Transmis s ion and St eering4LHD, Aut omati c t ransmis s ion
7 - Transmis s ion and St eering7RHD, Manual t rans mis s ion
7 - Transmis s ion and St eering8LHD, Manual transmis s ion8 - Engi neA3.2L Petrol
8 - Engi neB2.2L Di es el
8 - Engi neC2.2L Di es el wit h cDPF9- Check Digit4Deri ved by calculat ion: 0-9 or X
10 - Model year72007
10 - Model year82008

VIN PositionCharacterIdentifies
9 - Check digi t4Deri ved by calculat ion: 0-9 or X
10 - Model year8200810 - Model year92009
11 - Pl antHHalewood
12 -17 - Serial number100314Unique s ix di git s eri al number
VIN number - NAS and Canada (vehicles built from 2010MY)
VIN PositionCharacterIdentifies
1 - 3 - W orld ident ifierSALLand Rover (UK)
4 - Model rangeFLR25 - Clas sPNAS SE
5 - Clas sRNAS HSE
5 - Clas sSNAS SE+Lux pack5 - Clas sTNAS HSE+Lux pack
6 - Body Type24 Door
7 - Transmis s ion and St eeringBLHD, Aut omati c t ransmis s ion8 - Engi neN3.2L Petrol, ULEV 2 NAS
9 - Check digi t4Deri ved by calculat ion: 0-9 or X
10 - Model yearA201010 - Model yearB2011
10 - Model yearC2012
11 - Pl antHHalewood12 -17 - Serial number100314Unique s ix di git s eri al number
2.0 Liter Petrol Engine Serial Number
The 2.0 Li ter Petrol Engi ne Serial Number is st amped on t he RH s ide of t he cylinder block.
2.2 Liter Diesel Engine Serial Number

Publi s hed: 11-May-2011
Maintenance Schedules - Maintenance Schedules - Gasoline Engines
Des cript ion and Operat ion
Under Bonnet View
ItemPart NumberDescription1-Coolant expans ion t ank
2-Brake flui d res ervoir (LH drive i llus t rated - RH dri ve on oppos i te si de)
3-Engine oi l fil ler cap4-Power s teeri ng res ervoir
5-Engine oi l l evel i ndi cat or
6-W indscreen washer fl uid res ervoi r
Maintenance Operations
CAUTION: Not e that t he 'A' and 'B' Service Interval s li s ted on the 'Maintenance Check Sheet' for vehicles operat ingunder arduous condi ti ons , vary from t hos e s pecifi ed for vehicles operat ing under normal condit ions . Reference mus tt herefore, always be made to the 'Arduous Condi ti ons secti on for vehicles operat ing under thes e condi ti ons .
Unles s s tat ed otherwis e, the foll owi ng operati ons mus t be carri ed out at every s ervice int erval.
Battery

For addit ional informat ion, refer t o: Parking Brake Cabl e Adjus tment (206-05 Parki ng Brake and Actuat ion, GeneralProcedures).
Door Locks and Hinges
1. Check operat ion of all door locks, bonnet lock and fuel fi ll er flap.
2. Lubricate al l door check s t raps , bonnet cat ch and fuel fill er fl ap cat ch.
Cooling System
CAUTION: Anti-freeze concentration must be maintained at 50%.
1. Check s peci fi c gravit y of cool ant us ing a hydrometer.
• NOTE: A s uit able hydromet er is avail abl e from the Equipment Programme under Part Number 511 3302 001 00.
2. Top-up cool ing s ys tem if neces s ary.For addit ional informat ion, refer t o: Specificati ons (303-03A Engine Cool ing - I6 3.2L Pet rol , Specificati ons ).
Cooling system - Check/Top-up
W ARNING: Since injury such as scalding could be caused by escaping steam or coolant, do not remove the fillercap from the coolant expansion tank whilst the system is hot.
• CAUTIO NS:
Engine coolant w ill damage the paint finished surfaces. If coolant is spilled, immediately remove the coolantand wash the area with water.
Always top-up with a 50% mixture of anti-freeze and water.
Check t he l evel of cool ant i n t he expans ion t ank. W it h t he engi ne col d, the coolant level must be to the UPPERLEVEL indicat or mark above the COLD FILL RANGE t ext on the s i de of the expans i on tank. Ignore any coolantwhich may be vis ible in t he t op s ect ion of t he t ank.If topping-up i s requi red, remove expans ion tank fill er cap and top-up coolant level to the UPPER LEVEL indicat ormark.For addit ional informat ion, refer t o: Specificati ons (303-03A Engine Cool ing - I6 3.2L Pet rol , Specificati ons ).Ins t all expans ion t ank fi ll er cap, ti ght en cap unti l ratchet is heard to 'cli ck'.
Coolant - Replace
Every 10 years: Repl ace the coolant.For addit ional informat ion, refer t o: Cool ing Sys tem Drai ning, Fi ll ing and Bl eeding (303-03A Engine Cooli ng - I6 3.2L Pet rol,General Procedures ).
Ignition System
Every 75,000 miles (120,000 km). Replace s park plugs .For addit ional informat ion, refer t o: Specificati ons (303-07B Glow Pl ug Sys t em, Specificati ons ).
Accessory Drive Belt
CAUTION: For vehi cl es operati ng under arduous condi ti ons s ee relevant s ecti on.
Check t he condi ti on of the access ory drive bel t.Remove all t races of mud and dirt from t he dri ve belt and pull eys .Check t he drive belt for si gns of s pli tt ing and wear.Every 105,000 miles (168,000 km) - Petrol models: Replace the accessory drive belt. For addi ti onalinformat ion, refer t o: Acces s ory Drive Belt (303-05A Acces s ory Drive - I6 3.2L Pet rol , Removal and Ins t allat ion).