display Lexus HS250h 2012 Navigation Manual

26
7“Address Book”
The desired location can be selected from
a registered entry in the “Address book”.
(To register address book entries, see “(a)
Registering address book entries” on page
123.) 83
.................................
8“Emergency”
One of the four categories of emergency
service points that are already stored in the
system’s database can be selected. 83
.................................
9“Intersection & Freeway”
The names of two intersecting streets or a
freeway (interstate) entrance or exit can be
entered. This is helpful if only the general
vicinity, not the specific address, is known. 84
.................................
10“Map”
A destination can be selected simply by
selecting the location on the displayed
map. 87 ............................
11“Coordinates”
A destination can be set using latitudes
and longitudes as coordinates. 88 .....
12Preset destination buttons
One of 5 preset destination points can be
selected by selecting the screen directly.
If a preset destination point has not been
registered, a message will be displayed
and the setting screen will automatically
appear. To use this function, it is neces-
sary to set the “preset destination”. (To
register a “Preset Destination”, see “(a)
Registering preset destinations” on page
120.) 70 ...........................
13“Go Home”
A personal home address can be selected
without entering the address each time. If
“Home” has not been registered, a mes-
sage will be displayed and the setting
screen will automatically appear. To use
this function, it is necessary to set a
“Home” address. (To register “Home”, see
“(a) Registering home” on page 117.) 70
.................................
11 08.03HS250h_NAVI_U
75051U

27
The items shown on the “Setup” screen can be set. To display the “Setup” screen, push
the“MENU” button on the Remote Touch, then select “Setup”.
1“General”
Settings are available for language selec-
tion, operation sounds, automatic screen
change, etc. 312
....................
2“Clock”
Used for changing settings for time zones,
daylight saving time, etc. 318
.........
3“Voice”
Voice guidance can be set. 321 .......
4“Navi.”
Settings are available for average cruising
speed, displayed screen contents, POI
icon categories, etc. 324 .............
5“Other”
Settings are available for Lexus Insider,
XM rSports and Stocks. 388
..........
6“Vehicle”
Settings are available for vehicle informa-
tion such as maintenance information. 380
................................
7“Audio”
Settings are available for portable audio
devices, Bluetooth raudio devices etc.
373
................................
8“Phone”
Bluetooth rphones and phone numbers
can be registered, and the receiver volume
can be adjusted. 334 ................
11 08.03HS250h_NAVI_U
75051U
Quickreference (“Setup” screen)

28
This screen can be used to display the calendar and information on operation of the
hands−free phone, etc. To display the “Information” screen, push the “MENU”button
on the Remote Touch, then select “Info./Phone”.
1“Phone”
To view hands free phone information. 140
................................
2“Fuel Consumption”
Fuel consumption is displayed. 155 ....
3“Map Data”
Displays information regarding the map
data disc version or coverage area. 403
................................
4“Calendar”
To view calendar. 156 ................
5“XM NavWeather”
To display the “XM NavWeather” screen. 173
................................
6“XM Stocks”
To display the “XM Stocks” screen. 167
................................
7“XM Sports”
To display the “XM Sports” screen. 167
................................
8“LEXUS Insider”
To display the “LEXUS Insider” screen. 179
................................
11 08.03HS250h_NAVI_U
75051U
Quickreference (“Information” screen)

SECTION1
NAVIGATION SYSTEM: BASIC FUNCTIONS
29
NAVIGATION SYSTEM:
BASIC FUNCTIONS
Basic information before operation
DInitial screen 30 ...........................................
D How to use the Remote Touch 31 ............................
D Inputting letters and numbers/List screen operation 33 ..........
D Screen adjustment 36 ......................................
D Display operation 38 .......................................
D Help icon 39 ..............................................
D Map screen operation 39
..................................
Current position display 39 ...............................
Screen scroll operation 40 ................................
Switching the screens 46 .................................
Map scale 48 ...........................................
Foot print map 49 .......................................
Orientation of the map 50 .................................
Standard map icons 50 ...................................
D Voice command system 51
................................
Natural speech information 53 .............................
Command list 55 ........................................
11 08.03HS250h_NAVI_U
75051U
1

NAVIGATION SYSTEM: BASIC FUNCTIONS
30
U1001LS
When the “POWER” switch is in ACCES-
SORY or ON mode, the initial screen will
be displayed and the system will begin
operating.
CAUTION
When the vehicle is stopped with the
hybrid system operating, always ap-
ply the parking brake for safety.
After a few seconds, the “CAUTION”
screen will be displayed.
U1002LC
After about 5 seconds, the “CAUTION”
screen automatically switches to the map
screen. When selecting“Show Map”or
pushing the “MAP/VOICE” button on the
Remote Touch, the map screen is dis-
played.
11 08.03HS250h_NAVI_U
75051U
Initial screen

NAVIGATION SYSTEM: BASIC FUNCTIONS
31
D
Maintenance information
This system informs about when to replace
certain parts or components and shows
dealer information (if registered) on the
screen.
When the vehicle reaches a previously set
driving distance or date specified for a
scheduled maintenance check, the “Infor-
mation” screen will be displayed when the
navigation system is in operation.
U1057LC
To disable this screen, select “Do Not
Display This Message Again”. This
screen goes off if the screen is not op-
erated for several seconds.
To prevent this information screen from be-
ing displayed again, select “Do Not
Display This Message Again” .
To register “Maintenance information”, see
“—Maintenance” on page 380. This navigation system can be operated by
the Remote Touch when the “POWER”
switch is in ACCESSORY or ON mode.
U1007AASLY
A pointer is shown on the screen. Use the
Remote Touch knob to move the pointer
and select the buttons on the screen.
U1008AASLY
To select a button on the screen, place the
pointer on top of the button and then push
the
“ENTER” button on the Remote
Touch. Once a button has been selected,
the screen will change.
When the pointer moves close to a button,
it will be automatically pulled onto that but-
ton. The strength of this pull can be ad-
justed. (See page 316.)
The pointer will disappear from the screen
if it is not moved for 6 seconds. Operation
of the Remote Touch knob will cause the
pointer to reappear.
11 08.03HS250h_NAVI_U
75051U
How to use the Remote
Touch
1

NAVIGATION SYSTEM: BASIC FUNCTIONS
32
Pointer shape can be changed. (See page
316.)
: Change to an arrow.
: Change to a left hand.
: Change to a right hand.
:Display of the pointer can be
turned off. (Even if display of the pointer is
turned off, the pointer will appear on the
map screen as “+”.)
Push the “ ” button on the Remote Touch
to zoom in on the map screen and “ ”to
zoom out. These buttons can also be used
to scroll up and down on list screens.
Push the “MENU”button on the Remote
Touch to set a destination or adjust set-
tings for the audio system, air conditioning
system, etc.
You can return to the map screen by push-
ing the “MAP/VOICE” button on the Re-
mote Touch.
CAUTION
DDo not allow fingers, fingernails or
hair to become caught in the
Remote Touch as this may cause
an injury.
DBe careful when touching the
Remote Touch in extreme tempera-
tures as it may become very hot or
cold due to the temperature inside
the vehicle.
NOTICE
DDo not allow the Remote Touch to
come into contact with food, liq-
uid, stickers or lit cigarettes as do-
ing so may cause it to change col-
or, emit a strange odor or stop
functioning.
DDo not subject the Remote Touch
to excessive pressure or strong
impact as the knob may bend or
break off.
DDo not allow coins, contact lenses
or other such items to become
caught in the Remote Touch as this
may cause it to stop functioning.
DItems of clothing may rip if they be-
come caught on the Remote Touch
knob.
DIf your hand or any object is on the
Remote Touch knob when the
“POWER” switch is turned to AC-
CESSORY mode, the Remote
Touch knob may not operate prop-
erly.
INFORMATION
Under extremely cold conditions, the
Remote Touch knob may react slow-
ly.
11 08.03HS250h_NAVI_U
75051U

NAVIGATION SYSTEM: BASIC FUNCTIONS
33
When searching for an address or a name,
or entering, letters and numbers can be in-
put via the screen.
INFORMATION
Keyboard layout can be changed.
(See page 314.)
DTo input letters and numbers
To display the alphabet keys, select
“A− Z”.
U1004LC
Enter letters by selecting the keys directly.
:Selecting this button erases one
letter. By holding this button, let-
ters will continue to be erased.
On certain letter entry screens, letters can
be entered in upper or lower case.
U1005LC
: To enter in lower case.
: To enter in upper case.
11 08.03HS250h_NAVI_U
75051U
Inputting letters and
numbers/List screen
operation
1

NAVIGATION SYSTEM: BASIC FUNCTIONS
34
D
To input symbols
To display symbol keys, select “Other”.
U1006LC
Enter symbols by selecting the symbol
keys directly.
:Selecting this button erases one
letter. By holding this button, let-
ters will continue to be erased.
DTo display the list
U1007LC
To search for an address or a name, select
“OK” . Matching items from the database
are listed even if the entered address or
name is incomplete.
If the number of matches is five or less, the
list is displayed without selecting “OK”.
U1008LC
INFORMATION
The number of matching items is
shown to the right side of the screen.
If the number of matching items is
more than 999, the system displays
“
∗∗” on the screen.
11 08.03HS250h_NAVI_U
75051U

NAVIGATION SYSTEM: BASIC FUNCTIONS
35
D
List screen operation
When a list is displayed, use the appropri-
ate button to scroll through the list.
U1009LC
To shift to the next or previous
page.
Select or to scroll through
the displayed list.
This expresses a displayed screen
position.
If appears to the right of the
item name, the complete name is
too long for the display. Select
to scroll to the end of the name.
Select to scroll to the beginning
of the name.
INFORMATION
The “ ”or“ ” buttons on the
Remote Touch can be used to scroll
up and down on list screens.
DSorting
The order of a list displayed on the screen
can be rearranged.
U1010LC
1. Select “Sort”.
U1011LC
2. Select the desired sorting criteria.
Sorting criteria are as follows:
“Distance”: To sort in the order of dis-
tance from your current location.
“Date”: To sort in the order of the date.
“Category”: To sort in the order of the
category.
“Icon”: To sort in the order of the icons.
“Name”: To sort in order by name.
11 08.03HS250h_NAVI_U
75051U
1