Lexus IS250 2014 Navigation Manual

201
1. BASIC OPERATION
AUDIO/VISUAL SYSTEM
IS300h/250_Navi_EE
4
3Select the desired item to be adjusted.
1Press this switch to operate the speech
command system.
Screen buttonFunction
“Colour” “R”Select to strengthen the
red colour of the screen.
“Colour” “G”Select to strengthen the
green colour of the
screen.
“Tone” “+”Select to strengthen the
tone of the screen.
“Tone” “-”Select to weaken the
tone of the screen.
“Contrast” “+”Select to strengthen the
contrast of the screen.
“Contrast” “-”Select to weaken the
contrast of the screen.
“Brightness” “+”Select to brighten the
screen.
“Brightness” “-”Select to darken the
screen.
INFORMATION
●Depending on the audio source, some
functions may not be available.
SPEECH COMMAND SYSTEM
zThe speech command system and its list
of commands can be operated.
(→P. 2 74 )
IS_Navi_EE_53C71E.book 201 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

202
IS300h/250_Navi_EE
2. RADIO OPERATION
1. AM/FM/DAB RADIO
■CONTROL SCREEN
OVERVIEW
The radio operation screen can be reached by the following methods:
XUsing the instrument panel
Press the “RADIO” button to display the audio control screen.
XUsing the Remote Touch
Press the “MENU” button on the Remote Touch, then select “Audio” to display the au-
dio control screen.
IS_Navi_EE_53C71E.book 202 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

203
2. RADIO OPERATION
IS300h/250_Navi_EE
AUDIO/VISUAL SYSTEM
4
■CONTROL PANEL
IS_Navi_EE_53C71E.book 203 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

204
2. RADIO OPERATION
IS300h/250_Navi_EE
No.Function
Select to display the manual tuning screen.
Select to display the station list screen.
Select to display the preset station screen.
Select to display the audio source selection screen.
Select to display the audio setting screen.
Select to tune to preset stations/ensembles.
Select to display the time shift operation screen.
Tune/Scroll knob:
•“Presets” screen: Turn to select preset stations/ensembles.
•“Stations” screen: Turn to move up/down the list.
•Manual tuning screen: Turn to step up/down frequencies or change services.
•“DAB time shift” screen: Turn to jump forward/backwards.
Press to turn mute on/off.
•Press to move up/down the preset stations/ensembles.
•Press to move up/down the station list.
•Press and hold 0.8 sec. or more to seek up/down available stations/ensembles continu-
ously while the button is being pressed.
•Press to select a radio mode.
•While in a radio mode, pressing the “RADIO” button changes radio modes.
Power/Volume knob:
•Turn to adjust volume.
•Press to turn the audio system on/off.
•Press and hold to restart the audio system.
INFORMATION
●The radio automatically changes to stereo reception when a stereo broadcast is received.
●If the signal becomes weak, the radio reduces the amount of channel separation to prevent
the weak signal from creating noise. If the signal becomes extremely weak, the radio
switches from stereo to mono reception.
IS_Navi_EE_53C71E.book 204 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

205
2. RADIO OPERATION
IS300h/250_Navi_EE
AUDIO/VISUAL SYSTEM
4
1Tune in the desired station.
2Select one of the screen buttons (1-6)
and hold it until a beep is heard.
zThe station’s frequency will be displayed in
the screen button.
zTo change the preset station to a different
one, follow the same procedure.
XAM/FM
1Select “Manual”.
2Tune the desired station.
PRESETTING A STATION
Up to 6 preset stations can be regis-
tered.
MANUAL TUNING
No.Function
Select to seek up/down for a station.
Select to step up/down frequencies.
IS_Navi_EE_53C71E.book 205 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

206
2. RADIO OPERATION
IS300h/250_Navi_EE
XDAB
1Select “Manual”.
2Tune the desired ensemble or service.
No.Function
Select to set the desired ensemble.
Select to set the desired service.
RDS (RADIO DATA SYSTEM)
Depending on the availability of RDS in-
frastructure, the service may not func-
tion properly.
AF (ALTERNATIVE
FREQUENCY) FUNCTION
A station providing good reception is
automatically selected if current recep-
tion worsens.
IS_Navi_EE_53C71E.book 206 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

207
2. RADIO OPERATION
IS300h/250_Navi_EE
AUDIO/VISUAL SYSTEM
41A pop-up message is displayed on the
screen when the radio seeks out a TP
station.
2Select “Continue”.
■TRAFFIC ANNOUNCEMENT
VOLUME FUNCTIONTA (TRAFFIC
ANNOUNCEMENT)
FUNCTION
The tuner will automatically seek a sta-
tion that regularly broadcasts traffic in-
formation and the station broadcasts
when the traffic information program
starts.
INFORMATION
●When TA is set to “On” (→P. 2 5 2 ) , t h e
radio will begin seeking a TP station.
●When the program ends, the initial oper-
ation resumes.
The volume level when receiving the
traffic announcement is memorized.
IS_Navi_EE_53C71E.book 207 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

208
2. RADIO OPERATION
IS300h/250_Navi_EE
1Select “Time shift”.
2Select “<<” or “>>” to jump forward/
backward by 10 seconds.
Select and hold “<<” or “>>” to fast for-
ward /rewind.
TIME SHIFT OPERATION
(DAB)
The service you are currently listening to
can be re-listened to at any time.
INFORMATION
●The times at which playback is possible
depend on the bit rate of the DAB station
to be recorded, the amount of DAB unit
memory, and the time at which reception
of the broadcast began.
IS_Navi_EE_53C71E.book 208 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

209
IS300h/250_Navi_EE
AUDIO/VISUAL SYSTEM
4
3. MEDIA OPERATION
1. CD
■CONTROL SCREEN
OVERVIEW
The CD operation screen can be reached by the following methods:
XInserting a disc (→P.196)
XUsing the instrument panel
Press the “MEDIA” button to display the audio control screen.
XUsing the Remote Touch
Press the “MENU” button on the Remote Touch, then select “Audio” to display the au-
dio control screen.
XAudio CD
XMP3/WMA/AAC disc
IS_Navi_EE_53C71E.book 209 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

210
3. MEDIA OPERATION
IS300h/250_Navi_EE
■CONTROL PANEL
IS_Navi_EE_53C71E.book 210 ページ ２０１４年５月２９日　木曜日　午前１１時２２分