battery lexus LC500 2018 Manual Online

397
7
-$@-$I@0.@0.&@ &&

7-2. Steps to take in an emergency
When trouble arises
LC500h (Right-hand drive vehicles)
Exclusive jump starting terminal (your vehicle)
Positive (+) battery terminal (second vehicle)
Negative (-) battery terminal (second vehicle)
Solid, stationary, unpainted metallic point away from the exclusive jump starting
terminal and any moving parts as shown in the illustration
5 Start the engine of the second vehi-
cle. Increase the engine speed
slightly and maintain at that level for
approximately 5 minutes to
recharge the 12-volt battery of your
vehicle.
6 Open and close any of the door of
your vehicle with the engine switch
off.
7 Maintain the engine speed of the
second vehicle and start the engine
of your vehicle by
turning the engine switch switch> to IGNITION ON mode
.
8 Once the vehicle’s engine system> has started, remove the
jumper cables in the exact reverse
order from which they were con-
nected.
9 Close the exclusive jump starting
terminal cover, and reinstall the fuse
box cover to tits original position.
Once the engine starts, have the vehicle inspected at any autho-rized Lexus retailer or Lexus authorized
repairer, or any reliable repairer as soon as possible.
■Starting the engine when the 12-volt battery is discharged
The engine cannot be started by push-starting.
■To prevent 12-volt battery discharge
●Turn off the headlights and the audio sys-tem while the engine is
stopped.
●Turn off any unnecessary electrical com-
A
B
C
D

398
-$@-$I@0.@0.&@ &&

7-2. Steps to take in an emergency
ponents when the vehicle is running at a low speed for an extended period, such as in heavy traffic.
■When the 12-volt battery is removed or
discharged
●Information stored in the ECU is cleared.
When the 12-volt battery is depleted, have the vehicle inspected at any autho-rized Lexus retailer or Lexus authorized
repairer.
●Some systems may require initialization.
( P.436)
■When removing the 12-volt battery ter- minals
When the 12-volt battery terminals are removed, the information stored in the ECU is cleared. Before removing the 12-
volt battery terminals, contact any autho- rized Lexus retailer or Lexus authorized repairer.
■Charging the 12-volt battery
The electricity stored in the 12-volt battery will discharge gradually even when the
vehicle is not in use, due to natural dis- charge and the draining effects of certain
electrical appliances. If the vehicle is left for a long time, the 12-volt battery may dis-charge, and the engine
may be unable to start. (The 12-volt battery recharges automatically during driving.)
■When recharging or replacing the 12-volt battery
●In some cases, it may not be possible to unlock the doors using the smart entry &
start system when the 12-volt battery is discharged. Use the wireless remote control or the mechanical key to lock or
unlock the doors.
●The engine may not start
on the first attempt after the 12-volt bat- tery has recharged but will start normally after the second attempt. This is not a
malfunction.
●The engine switch mode
is memorized by the vehicle. When the 12-volt battery is reconnected, the system will return to the mode it was in before
the 12-volt battery was discharged.
Before disconnecting the 12-volt battery, turn the engine switch off. If you are unsure what mode the engine
switch was in before the 12-volt battery discharged, be especially careful when reconnecting the 12-volt
battery.
●If the 12-volt battery discharges, it may
not be possible to shift the shift position to other positions. In this case, the vehicle cannot be towed without lifting both rear
wheels because the rear wheels will be locked. ( P.363)
■When replacing the 12-volt battery
●Use a Central Degassing type 12-volt battery (European Regulations).
●LC500: Use a 12-volt battery that the case size is same as the previous one (LN4), 20 hour rate capacity (20HR) is
equivalent (80Ah) or greater, and per- formance rating (CCA) is equivalent (685A) or greater.
LC500h: Use a 12-volt battery that the case size is same as the previous one (LN3), 20 hour rate capacity (20HR) is
equivalent (70Ah) or greater, and perfor- mance rating (CCA) is equivalent
(600A) or greater. • If the sizes differ, the 12-volt battery can-not be properly secured.
• If the 20 hour rate capacity is low, even if the time period where the vehicle is not used is a short time, the 12-volt battery
may discharge and engine may not be able to start.
●Use a 12-volt battery with a handle. If a 12-volt battery without a handle is used, removal is more difficult.
●After exchanging, firmly attach the fol-lowing items to the exhaust hole of the 12-
volt battery. • Use the exhaust hose that was attached to the 12-volt battery before exchanging.
• Use the exhaust hole plug included with the 12-volt battery exchanged or the one installed on the battery prior to the
exchange. (Depending on the 12-volt battery to be exchanged, the exhaust hole may be plugged.)

399
7
-$@-$I@0.@0.&@ &&

7-2. Steps to take in an emergency
When trouble arises
Exhaust hole plug
Exhaust hole
Exhaust hose
For details, consult any authorized Lexus
retailer or Lexus authorized repairer.
WARNING
■When removing the 12-volt battery
terminals
Always remove the negative (-) terminal first. If the positive (+) terminal contacts any metal in the surrounding area when
the positive (+) terminal is removed, a spark may occur, leading to a fire in addi-tion to electrical shocks and death or
serious injury.
■Avoiding 12-volt battery fires or explosions
Observe the following precautions to prevent accidentally igniting the flamma-
ble gas that may be emitted from the 12- volt battery:
●Make sure each jumper cable is con-nected to the correct terminal and that
it is not unintentionally in contact with any other than the intended terminal.
A
B
C
●Do not allow the other end of the jumper cable connected to the “+” ter-
minal to come into contact with any other parts or metal surfaces in the area, such as brackets or unpainted
metal.
●Do not allow the + and - clamps of the jumper cables to come into contact with each other.
●Do not smoke, use matches, cigarette
lighters or allow open flame near the 12-volt battery.
●If the 12-volt battery fluid level is exces-sively low ( P.327), do not use the
12-volt battery.
■12-volt battery precautions
The 12-volt battery contains poisonous and corrosive acidic electrolyte, while related parts contain lead and lead com-
pounds. Observe the following precau- tions when handling the 12-volt battery:
●When working with the 12-volt battery, always wear safety glasses and take
care not to allow any 12-volt battery fluids (acid) to come into contact with
skin, clothing or the vehicle body.
●Do not lean over the 12-volt battery.
●In the event that 12-volt battery fluid comes into contact with the skin or eyes, immediately wash the affected
area with water and seek medical attention.Place a wet sponge or cloth over the
affected area until medical attention can be received.
●Always wash your hands after handling the 12-volt battery support, terminals,
and other battery-related parts.
●Do not allow children near the 12-volt battery.

400
-$@-$I@0.@0.&@ &&

7-2. Steps to take in an emergency
1Stop the vehicle in a safe place and
turn off the air conditioning system,
and then stop the engine.
2 If you see steam:
Carefully lift the hood after the
steam subsides.
If you do not see steam:
Carefully lift the hood.
3 After the engine has cooled down
sufficiently, inspect the hoses and
WARNING
■After recharging the 12-volt battery
Have the 12-volt battery inspected at any authorized Lexus retailer or Lexus authorized repairer, or any reliable
repairer as soon as possible. If the 12-volt battery is deteriorating, continued use may cause the 12-volt battery to emit a
malodorous gas, which may be detri- mental to the health of passengers.
■When exchanging the 12-volt battery
After exchanging, securely attach the exhaust hose and exhaust hole plug to
the exhaust hole of the exchanged 12- volt battery. If not properly installed, gases (hydrogen) may leak into the vehi-
cle interior, and there is the possible dan- ger of the gas igniting and exploding.
NOTICE
■When handling jumper cables
When connecting the jumper cables, ensure that they do not become entan-gled in the cooling fan or engine drive
belt.
■To prevent damaging the vehicle
The exclusive jump starting terminal is to be used when charging the 12-volt bat-tery from another vehicle in an emer-
gency. It cannot be used to jump start another vehicle.
If your vehi cle overheats
(LC500)
The following may indicate that
your vehicle is overheating.
 The engine coolant temperature
gauge ( P.88) is in the red zone
or a loss of engine power is expe-
rienced. (For example, the vehicle
speed does not increase.)
 “Engine Coolant Temp High” is
shown on the multi-information
display.
 Steam comes out from under the
hood.
Correction procedures

412
-$@-$I@0.@0.&@ &&

8-1. Specifications
*: If unleaded gasoline with an octane rating of 98 RON is not available, unleaded gasoline
with an octane rating of 95 RON may be used with no detriment to engine durability or
driveability.
Bore and stroke94.0  83.0 mm (3.7  3.3 in.)
Displacement3456 cm3 (210.9 cu.in.)
Drive belt tensionAutomatic adjustment
Fuel
Fuel type
When you find these types of fuel label at the
gas station, use only the fuel with one of the fol-
lowing labels.

EU area:
Unleaded gasoline conforming to European
standard EN228 only
Except EU area:
Unleaded gasoline only
Research Octane NumberLC50098 or higher*
LC500h95 or higher
Fuel tank capacity (Reference)82 L (21.7 gal., 18.0 Imp.gal.)
Electric motor (traction motor) (LC500h)
TypePermanent magnet synchronous motor
Maximum output131.9 kW
Maximum torque300 N•m (30.6 kgf•m, 221.3 ft•lbf)
Hybrid battery (traction battery) (LC500h)
TypeLithium-ion battery
Voltage3.7 V/cell

416
-$@-$I@0.@0.&@ &&

8-1. Specifications
*: The fluid capacity is a reference quantity.
If replacement is necessary, contact any auth orized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
■Spark plug
■12-volt battery
Cooling system
Capacity*
LC50012.1 L (12.8 qt., 10.6 Imp.qt.)
LC500h
Gasoline engine
10.9 L (11.5 qt., 9.6 Imp.qt.)
Power control unit
2.3 L (2.4 qt., 2.0 Imp.qt.)
Coolant type
Use either of the following:
• “Toyota Super Long Life Coolant”
• Similar high-quality ethylene glycol-based non-sili-
cate, non-amine, non-nitrite, and non-borate coolant
with long-life hybrid organic acid technology
Do not use plain water alone.
Ignition system
LC500LC500h
MakeDENSO FK20HBR-J8DENSO FK20HBR8
Gap0.8 mm (0.031 in.)0.8 mm (0.031 in.)
NOTICE
■Iridium-tipped spark plugs
Use only iridium-tipped spark plugs. Do not adjust the spark plug gap.
Electrical system
Specific gravity reading at 20°C
(68°F):1.250 or higher

423
8
-$@-$I@0.@0.&@ &&

8-2. Customization
Vehicle specifications
8-2.C usto miz ation
■Changing by using the meter con-
trol switches
1 Press or of the meter con-
trol switches, select .
2 Press or of the meter con-
trol switches, select the item, and
press “OK”.
3 Press or of the meter con-
trol switches, select the desired set-
ting, and press “OK”.
To go back to the previous screen or
exit the customize mode, press .
■Changing by using the Remote
Touch
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup” on the menu screen
and select “Vehicle”.
3 Select “Vehicle customisation”,
“LEXUS park assist” or “Drive
mode customisation”.
Various setting can be changed. Refer
to the list of settings that can be
changed for details.
For details on the Remote Touch, refer
to the “NAVIGATION SYSTEM
OWNER’S MANUAL”.
■When customizing using the Remote
Touch
Stop the vehicle in a safe place, apply the
parking brake, and shift the shift position to P. Also, to prevent 12-volt battery discharge,
leave the engine running while cust omizing the features.
Some function settings are changed simultaneously with other functions being cus-
Customizable features
Your vehicle includes a variety of
electronic features that can be per-
sonalized to your preferences. The
settings of these features can be
changed by using the meter control
switches, the Remote Touch or at
any authorized Lexus retailer or
Lexus authorized repairer, or any
reliable repairer.
Customizing vehicle features
WARNING
■During customization
As the engine needs to be running during customi-
zation, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust
gases including harmful carbon monox- ide (CO) may collect and enter the vehi-cle. This may lead to death or a serious
health hazard.
NOTICE
■During customization
To prevent 12-volt battery discharge,
ensure that the engine is running while customizing features.
Customizable features

436
-$@-$I@0.@0.&@ &&

8-3. Items to initialize
8-3.Items to initialize
Items to initialize
The following items must be initialized for normal system operation after such
cases as the 12-volt battery being re connected, or maintenance being per-
formed on the vehicle:
List of the items to initialize
ItemWhen to initializeReference
Tire pressure warning system
• When rotating the tires.
• When the tire inflation pressure is
changed by changing tire size.
(When there are multiple speci-
fied pressures)
• After registering the ID codes.
• When the tire inflation pressure is
changed such as when changing
traveling speed.
P.335
Power windows• When functioning abnormallyP.150
Lexus parking assist monitor
• The steering wheel has been
moved while the 12-volt battery
was being reinstalled.
• 12-volt battery power is low.
Refer to the
“NAVIGA-
TION SYSTEM
OWNER’S
MANUAL”.
Oil maintenance (LC500h)• After the maintenance is per-
formedP.321

438
-$@-$I@0.@0.&@ &&

What to do if... (Troubleshooting)
1-1.What to do if ... (Tro ubleshooting )What to do if... (Troubleshooting)
If you lose your mechanical keys,
new genuine mechanical keys can
be made by any authorized Lexus
retailer or Lexus authorized
repairer, or any reliable repairer.
( P.388)
 If you lose your electronic keys, the
risk of vehicle theft increases signifi-
cantly. Contact any authorized
Lexus retailer or Lexus authorized
repairer, or any reliable repairer
immediately. ( P.388)
 Is the electronic key battery weak or
depleted? ( P.349)
 Is the engine switch
in IGNITION ON mode mode>?
When locking the doors, turn the engine
switch off. ( P.165, 170)
Is the electronic key left inside the
vehicle?
When locking the doors, make sure that
you have the electronic key on your per-
son.
 The function may not operate prop-
erly due to the condition of the radio
wave. ( P.124)
 The function to prevent the elec-
tronic key from being left inside the
trunk will operate and you can open
the trunk as usual. Take the key out
from the trunk. ( P.120)
 Did you press the engine switch
while firmly
depressing the brake pedal?
( P.163, 167)
 Is the shift position in P? (P.173,
179)
 Is the electronic key anywhere
detectable inside the vehicle?
( P.123)
 Is the steering wheel unlocked?
( P.164, 168)
 Is the electronic key battery weak or
If you have a problem, check the
following before contacting any
authorized Lexus retailer or Lexus
authorized repairer, or any reliable
repairer.
The doors cannot be locked,
unlocked, opened or closed
You lose your keys
The doors cannot be locked or
unlocked
The trunk lid is closed with the
electronic key left inside
If you think something is wrong
The engine does
not start

439
-$@-$I@0.@0.&@ &&

What to do if... (Troubleshooting)
depleted?
In this case, the engine can
be started in a temporary way. ( P.390)
Is the 12-volt battery discharged?
( P.392)
 It is locked automatically to prevent
theft of the vehicle. ( P.164, 168)
 Is the window lock switch pressed?
The power window at the passenger’s seat
cannot be operated if the window lock
switch is pressed. ( P.152)
The auto power off function will be
operated if the vehicle is left in
ACCESSORY or IGNITION ON
mode (the engine is
not running operating>) for a period of time.
( P.166, 170)
 The seat belt reminder light is flash-
ing
Are the driver and the passengers wearing
the seat belts? ( P.373)
The parking brake indicator is on
Is the parking brake released? (P.187)
Depending on the situation, other
types of warning buzzer may also
sound. ( P.368, 378)
 Did anyone inside the vehicle open
a door or anything move inside the
vehicle during setting the alarm?
The sensor detects them and the alarm
sounds. ( P.76)
To stop the alarm, turn the engine
switch to IGNITION
ON mode or start the
engine .
 Is the message displayed on the
multi-information display?
Check the message on the multi-informa-
tion display. ( P.378)
When a warning light turns on or a
warning message is displayed, refer
to P.368, 378.
The steering wheel cannot be
turned after the engine system> is stopped
The windows do not open or
close by operating the power
window switches
The engine switch switch> is turned off automati-
cally
A warning buzzer sounds during
driving
An alarm is activated and the
horn sounds
A warning buzzer sounds when
leaving the vehicle
A warning light turns on or a
warning message is displayed