water pump LEXUS LS430 2003 Factory Owner's Manual

If necessary, replace the water pump.
27. Remove any oil or water on the crankshaft damper, oil pump pulley, water pump pulley, idler No. 1 and
idler No. 2. Keep them clean.
Fig. 196: Checking Water Pump

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
28. Set the No. 1 cylinder to TDC/compression.
1. Turn the hexagon wrench head portion of the camshaft to align the timing marks of the camshaft
timing pulleys and timing belt plates.

Fig. 199: Turning Crankshaft To Aligning Timing Marks
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3. Remove any oil or water on each pulley. Keep them clean.
4. Face the front mark (arrow) on the belt forward.
5. Connect the belt to the crankshaft timing pulley. Align the installation mark on the belt with the
timing mark of the crankshaft timing pulley.
6. Connect the belt to the idler No. 2.
7. Connect the belt to the camshaft timing pulley (LH bank).
Align the installation mark on the belt with the timing mark of the camshaft timing pulley.
8. Connect the belt to the water pump pulley.
9. Connect the belt to the camshaft timing pulley (RH bank).
Align the installation mark on the belt with the timing mark of the camshaft timing pulley.

a. Install the cover bracket with the bolt.
Torque: 7.5 N.m (76 kgf.cm, 66 in.lbf)
23.INSTALL THROTTLE BODY ASSY
a. Install the throttle body with the 2 bolts and 2 nuts.
b. Connect the water by-pass hose.
c. Connect the PCV hose.
d. Connect the connector to the throttle body.
24.INSTALL INTAKE AIR CONNECTOR PIPE
a. Install the intake air connector pipe with the bolt and hose clamp.
Torque:
4.0 N.m (40 kgf.cm, 35 in.lbf) for hose clamp
5.0 N.m (50 kgf.cm, 44 in.lbf) for bolt
b. Connect the air hose and ventilation hose No. 1 together.
25.INSTALL AIR CLEANER INLET NO. 1
26.INSPECT FUEL PUMP OPERATION AND CHECK FOR FUEL LEAKS
27.INSTALL V-BANK COVER
a. Install the V-bank cover with the 2 nuts.
Torque: 5.0 N.m (50 kgf.cm, 44 in.lbf)
28.REFILL ENGINE COOLANT
29.CHECK FOR ENGINE COOLANT LEAKS
a. Check for engine coolant leaks.
If leaks are present, find the leak and repair or replace parts as necessar
y.