park LEXUS LS430 2003 Factory Owner's Guide

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
11.REMOVE PARKING BRAKE SWITCH ASSY
a. Remove the screw and parking brake switch assy.
12.DISCONNECT PARKING BRAKE RELEASE CABLE SUB-ASSY
a. Disconnect the parking brake cable from the parking brake control pedal sub-assy.
13.REMOVE PARKING PEDAL PAD
a. Tear off the parking brake pedal pad from the parking brake control pedal sub-assy by hand.
Fig. 147: Removing Parking Pedal Pad

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
14.REMOVE PARKING BRAKE PEDAL RETURN ABSORBER ASSY
a. Remove the 2 E-rin
gs, parking brake pedal return absorber assy and 2 bushings.

Fig. 148: Removing Parking Brake Pedal Return Absorber Assy
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
15.INSTALL PARKING BRAKE PEDAL RETURN ABSORBER ASSY
a. Install the 2 bushings, parking brake pedal return absorber assy and 2 new E-rings.

16.INSTALL PARKING PEDAL PAD
17.CONNECT PARKING BRAKE RELEASE CABLE SUB-ASSY
a. Connect the parking brake release cable sub-assy to the parking brake control pedal sub-assy.
18.INSTALL PARKING BRAKE SWITCH ASSY
a. Install the parking brake switch assy with the screw.
19.INSTALL PARKING BRAKE CONTROL PEDAL ASSY
a. Install the parking brake control pedal assy with the 3 nuts.
Torque: 13 N.m (130 kgf.cm, 9 ft.lbf)
b. Connect the instrument panel junction block assy with bracket.

Fig. 149: Installing Parking Brake Control Pedal Assy With Nuts

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Install the 2 bolts and parking brake release cable sub-assy to the body.
Torque: 6.0 N.m (61 kgf.cm, 53 in.lbf)
Fig. 150: Installing Bolts And Parking Brake Release Cable Sub
-Assy To Body
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. En
gage the wire harness to the parking brake pedal control assy.

Fig. 151: Engaging Wire Harness To Parking Brake Pedal Control Assy
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
e. Connect the parking brake switch connector.

Fig. 152: Connecting Parking Brake Switch Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
20.INSTALL PARKING BRAKE CABLE ASSY NO.1
a. Attach the parking brake cable assy No.1 to the parking brake control pedal assy.
b. Using needle-nose pliers, slowly bend the claw.
Be careful not to dama
ge the parking brake cable assy No.1 or the claw.

Fig. 153: Attaching Parking Brake Cable Assy No.1 To Parking Brake Control Pedal Assy
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Install the clip to the parking brake control pedal sub-assy.

Fig. 154: Installing Clip To Parking Brake Control Pedal Sub-Assy
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. Install the spring and temporarily tighten the wire adjusting nut and lock nut.

Fig. 155: Installing Spring And Temporarily Tighten Wire Adjusting Nut And Lock Nut
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
21.INSPECT PARKING BRAKE PEDAL TRAVEL (SEE ADJUSTMENT
)
HINT:
Depress and release the parking brake pedal several times before adjusting the parking brake pedal. If the
parking brake pedal is correct at this time, tighten the parking brake wire adjusting nut.
Torque: 6.0 N.m (61 kgf.cm 53 in.lbf)
22.ADJUST PARKING BRAKE PEDAL TRAVEL (SEE ADJUSTMENT
)
23.INSTALL INSTRUMENT PANEL AIR BAG ASSY LOWER NO.1 (SEE REPLACEMENT
)
24.INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSY NO.1 (SEE REPLACEMENT
)
25.INSTALL COIN BOX ASSY
26.INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSY NO.1 (SEE REPLACEMENT
)
27.INSTALL INSTRUMENT CLUSTER FINISH PANEL END (SEE REPLACEMENT
)
28.INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER LOWER (SEE
REPLACEMENT
)
29.CONNECT BATTERY NEGATIVE TERMINAL