lane assist MAZDA 323 1989 Factory Repair Manual

TECHNICAL DATA TD
Item
Carrier hub
Sun gear drum
Small sun gear TransaxlelEngine
Clearance between pinion washer
and planet carrier mm (in) Maximum
Bushing inner diameter
mm (in) Maximum
Bushing inner diameter
mm (in) Maximum F4A-EL
B6 SOHC BP SOHC BP DOHC
0.2-0.7 (0.008-0.028)
30.425 (1.198)
21.021 (0.828)
Gear assembly
Total end play
End play adjust race
Idle gear bearing preload
Preload
adjust shims
Output gear bearing preload
Preload adjust shims
Differential
Bearing preload
Preload
adjust shims
Backlash of side gear and pinion mm (in)
mm (in)
N.m (cm-kg, in-lb)
mm (in)
N.m (cm-kg, in-lb)
mm (in)
N.m (cm-kg, in-lb)
mm (in)
mm (in) Standard
Maximum 0.25-0.50 (0.010-0.020)
1.2 (0.047) 1.4 (0.055), 1.6 (0.063)
1.8 (0.071) 2.0 (0.079) 2.2 (0.087)
-
0.03-0.9 (0.3-9.0, 0.26-7.8)
3.80 (0.150) 3.85 (0.152) 3.90 (0.154) 3.95
(0.156)
4.00 (0.158) 4.05 (0.159) 4.10 (0.161) 4.15 (0.163)
4.20 (0.165) 4.25 (0.167) 4.30 (0.169) 4.35 (0.171)
4.40 (0.173), 4.45 (0.175) 4.50 (0.177) 4.55
(0.179)
4.60 (0.181) 4.65 (0.183) 4.70 (0.185) 4.75 (0.187)
0.03-0.9 (0.3-9.0, 0.26-7.8)
0.50 (0.020) 0.55 (0.022) 0.60 (0.024) 0.65
(0.026).
0.70 (0.028) 0.75 (0.030) 0.80 (0.032) 0.85
(0.034)
0.90 (0.035) 0.95 (0.037) 1.00 (0.039) 1.05 (0.041)
1.10 (0.043) 1.15 (0.045) 1.20 (0.047) 1.25 (0.049)
1.30 (0.051), 1.35 (0.053) 1.40 (0.055) 1.45
(0.057)
2.9-3.9 (30-40, 26-35)
0.50 (0.020) 0.55 (0.022) 0.60 (0.024) 0.65
(0.026)
0.70 (0.028) 0.75 (0.030) 0.80 (0.032) 0.85 (0.034)
0.90 (0.035) 0.95 (0.037) 1.00 (0.039), 1.05 (0.041)
1.10 (0.043) 1.15 (0.045) 1.20 (0.047). 1.25 (0.049)
1.30 (0.051) 1.35 (0.053) 1.40 (0.055), 1.45 (0.057)
0.025-0.1 (0.001-0.004)
0.5 (0.020)
Torque converter
Bushing inner diameter mm (in) Standard 1 53.030-53.075 (2.088-2.090)
Maximum 1 53.075 (2.090)
Spring Specification
Spring name Outer diameter Free length
No. of coil Wire diameter
mm (in) mm (in) mm (in)
Throttle modulator 8.1 I I--.._ ^^^1-^1 1 spring 1 (0.319)
1 43.4 (1.709) 1 10.5 1 0.8 (0.031)
1
” cJIJtz:I li”I IL, “I
valve body Throttle spring
Throttle assist spring 1 5.4 (0.213) 46.2 (1.819) 1 29.0
0.88 (0.035)
1 5.15 (0.203)
26.88 (1.058) 1 16.2 0.6 (0.024)
,
^ -- ,^ ^^^
Mnin contrnl I Low reducina sprina I 7.9 (0.311) .._... __.._. -
valve body
-. .- \“---I 29.98 (1.180) 10.0
0.8 (0.03lj
1 3-4
shift spring / 7.4 (0.291) I 36.6 (1.441)
12.0 0.8 (0.031)
B6 SOHC
23.0
Bypass spring BP
SOHC 4.9 (0.193) 27.6 (1.087) 0.55 (0.022)
Premain control BP
DOHC 4.9 (0.193) 30.5 (1.201) 23.0
0.55 (0.022)
valve body
2-3 shift spring 7.4 (0.291) 36.6 (1.441)
12.0 0.8 (0.031)
Converter relief spring
8.6 (0.339) 68.4 (2.693) 27.5
1.2 (0.057)
Lockup control spring
5.0 (0.197) 30.1 (1.185) 21.5 0.55 (0.022)
Control valve body Throttle relief spring
6.6 (0.260) 21.6 (0.850) 11.5
0.8 (0.031)
Oil
pump Spring
13.0 (0.512) 53.0 (2.087)
12.0 1.2 (0.047)
TD-15