belt MAZDA 626 1987 Workshop Manual

MOLDING AND GARNISH 1 4
TRUNK LID MOLDING
(SEDAN AND HATCHBACK)
Removal and Installation
1. Remove the rear finisher.
2. Remove the nuts and screws and remove the trunk
lid molding.
3. Install in the reverse order of removal.
CENTER PILLAR GARNISH
(SEDAN AND HATCHBACK)
Removal and Installation
1. Remove the seat belts.
2. Remove the front header trim.
3. Remove the center pillar trim.
4. Remove the nuts with a deep socket wrench, then
remove the garnish.
5. Install in the reverse order of removal.
76G14X020
REAR FINISHER (COUPE/MX-6 AND SEDAN)
Removal and Installation
1. Remove the nuts and the rear finisher.
2. Install in the reverse order of removal.
76G14X-021
REAR FINISHER (HATCHBACK)
Removal and Installation
1. Remove the hatchback door side trims.
2. Remove the hatchback door lower trim.
3. Remove the hatchback door screen.
4. Remove the nuts and the rear finisher.
5. Install in the reverse order of removal.
76G14X-022
14—41

1 4 REAR WINDOW GLASS
REAR WINDOW GLASS
STRUCTURAL VIEW
Sedan
86U14X-125
1. Rear package tray 4. Rear window side molding 7. Rear window glass
2. Rear header trim 5. Rear window lower molding 8. Spacer
3. Rear pillar trim 6. Rear window upper 9. Seat belt bolts
molding
Note
Use window tool set (49 0305 870A) to remove and install the glass.
14-52

REAR WINDOW GLASS 1 4
76G14X-046
1. Seat belt bolts
2. Rear side trim
3. Rear header trim
4. Rear pillar trim
5. Rear window side molding
6. Rear package tray
7. Rear window upper
molding
8. Rear window lower molding
9. Rear window glass
10. Spacer
11. Clips
14—53

14 REAR WINDOW GLASS
86U14X-127
76G14X-034

/W Af/

wAfii
A
86U14X-129
REMOVAL
1. Disconnect the negative battery cable.
2. Disconnect the defogger connector.
3. Remove the seat belts.
4. Remove the screws and the quarter trim.
5. Remove the screws and the center pillar trim.
6. Remove the screws and the rear header.
7. Remove the nuts and the rear window side
molding.
8. Remove the fasteners and the rear package tray.
86U14X-130
14—54

QUARTER WINDOW GLASS 14
Coupe/MX-6
86U14X-149
1. Seat belt bolts
2. Screw
3. Screw
4. Side trim
5. Screw
6. Rear pillar trim
7. Nut
8. Screw
9. Drip molding
10. Quarter window molding
11. Quarter window glass
12. Dam
14-63

14 HEADLINER
10. Remove the caps and screws at the ends of the
front header trim.
86U14X-164
11. Remove the caps and screws at the ends of the
rear header trim.
86U14X-165
| 12. Remove the rear side trim.
86U14X-166
13. Remove the seat belt mounting bolts.
86U14X-167
14-70

SEAT BELTS
1
4
SEAT BELTS
STRUCTURAL VIEW
76G14X-032
1. Buckles 3. Rear seat belts 5. Retractors
2. Front seat belts 4. Retractors
INSPECTION
1. Check that the belt can be pulled out smoothly and
that it retractors lock when belt pulled quickly.
2. Inspect the webbing for scars, tears, and wear and
for deformation of the fittings.
Caution
Do not disassemble the buckle or ELR as-
sembly.
14—101

WARNING LIGHT AND SENDER 1 5
76G15X-090
Seat Belt Warning Light
76G15X-043
EC-AT Mode Indicator Light

POWER and ECONO indicator lights
do
not
il-
luminate.

NG
Check the hold switch. Refer
to
page 7B—63
NG
Replace the switch.

OK
NG
Check the mode switch. Refer
to
page 7B—63
NG
Replace the switch.

fOK

Replace the bulb
or
repair the harness (Meter
to
mode switch, EC-AT switch
to
control unit).

76G15X-091
76G15X-044
15—37

CENTRAL PROCESSING UNIT (CPU) 1 5
CENTRAL PROCESSING UNIT (CPU)
STRUCTURAL VIEW
86U15X-071
FUNCTIONS
System Function
Sound Alarm System

Key reminder alarm

Sound Alarm System
Liaht-off reminder alarm
Sound Alarm System

Seat belt alarm

Timer System

Seat belt timer

Timer System
Kev illumination liaht timer
Timer System

Interior light timer

76G15X-008
15—41

1 5 CENTRAL PROCESSING UNIT (CPU)
CIRCUIT DIAGRAM
-O-vO
I &
IG key
OFF
n\ Key reminder
Door ajar
warning light vf Door SW
llfl Engine control —_
unitj^"
Buckle SW
W7i
0
o
o
0
o
0
o
o
o
a
Q
u
n
dD
IG key
illumination light
[ Interior light
(f)
(f) (|)
teesy
J
cF Seat belt warning light
o o o 0 o o o
•a-
o o o o o o o
15-42
86U15X-073