light MAZDA CX90 2024 Manual PDF

How to Use the TurnSignal Lever
When the lever is operated, the turn
signal lights flash/turn
off.
Using the Turn Signal Lever
Turning left or right
Operate the lever to the 1 or 4
position.
Each turn signal light flashes and the
turn signal light
in the
instrument cluster flashes.
The lever returns to its original position
in conjunction with the steering wheel
operation. If it does not return, return
it by hand.
Changing lanes
Operate the lever to the 2 or 3
position.
While the lever is in the 2 or 3
position, each turn signal light flashes
and the turn signal light
in the
instrument cluster flashes.
If you move the lever to the 2 or 3
position and release it immediately,
the three-flash turn signal operates and
the turn signal light flashes 3 times.
NOTE
The volume of the turn signal lever
sound can be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
The three-flash turn signal can be
turned off.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Driving
Tu r n S i g n a l l e v e r
5-72
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Do not cover the rain sensor by
applying stickers or labels to the
windshield. Otherwise, the sensor
cannot detect the amount of rainfall.
When the vehicle power is switched
ON and the wiper lever is in the
AUTO position, the windshield
wipers may operate automatically in
the following cases:
 The area of the windshield above
the rain sensor is touched or wiped
with a cloth.
 The windshield or the rain sensor
area in the cabin is hit.
When the vehicle power is switched
ON and the wiper lever is in the
AUTO position, do not touch the
windshield or the windshield wipers
Otherwise, the windshield wipers
will operate automatically which
could catch your fingers or damage
the windshield wipers. When
removing ice or snow, or cleaning
the windshield, always make sure the
wiper lever is in the OFF position.
How to Use the
Windshield Wiper/ Washer Switch
Using the Auto Wipers*
1. Indicator light
The indicator light of the lever turns
on.
The windshield wipers operate
automatically according to the rainfall
amount.
CAUTION
Even if it is not raining , the windshield
wipers may operate automatically in
the following cases.
The area of the windshield above the
rain sensor is touched or wiped with
a cloth.
 The windshield or the rain sensor
area in the cabin is hit.
NOTE
If a water repellent coating other
than a genuine product is used, the
rain sensor may not detect the
rainfall amount correctly and the
auto wipers may not operate
normally. Do not use a water
repellent coating other than a
genuine product.
Driving
Windshield Wiper/Washer Switch
5-74*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

If dirt or ice is adheres to the top of
the rain sensor on the windshield
and the windshield wipers cannot
remove the dirt or ice even after the
wipers operate several times, the
auto wipers will stop operating. If
the auto wipers stopped, remove the
dirt and ice from the windshield.
The auto wipers could operate from
the effect of strong light sources,
electromagnetic waves, or infrared
light because the rain sensor uses an
optical sensor. It is recommended
that the auto-wiper lever be
switched to the OFF position other
than when driving the vehicle under
rainy conditions.
Changing sensitivity of auto wipers
The rain sensitivity level can be
adjusted by rotating the switch.
1. Higher sensitivity
2. Normal
3. Less sensitivity
Using the Intermittent Wiper
*
The wipers operate intermittently.
Changing the intermittent operation
time
The intermittent operation time can be
adjusted by turning the switch.
1. Fast
2. Normal
3. Slow
Using the Windshield Wipers
Using continuously
Set the lever to the LO or HI position.
In the LO position, the windshield
wipers operate at low speed. In the HI
position, the wipers operate at high
speed.
Driving
Windshield Wiper/Washer Switch
*Some models.5-75
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the Rear
Window Defogger Switch
Using the Rear Window Defogger
Switch
1. Start the hybrid system.
2.
The rear window defogger operates
and the switch indicator light turns on.
The rear window defogger stops
automatically after it operates about
15 minutes.
NOTE
The rear window defogger operation
time can be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Stopping the Rear Window Defogger
Press the rear window defogger switch
while the rear window defogger is
operating.
The rear window defogger stops and
the switch indicator light turns off.
Mirror Defogger*
The mirrors are heated using heat
filaments to remove fog.
Driving
Rear Window Defogger Switch
*Some models.5-79
CX-90_8KG7-EA-22L_Edition1_new
2022-11-17 16:05:04

Hazard Warning Lights
The hazard warning light switch is used
when it is necessary to park the vehicle
on a roadside due to a vehicle
breakdown or other emergency.
How to Use the HazardWarning Lights
The vehicle power is switched ON
All the turn signal lights flash, and the
turn signal light
and the hazard
warning light
in the instrument
cluster flash.
Press the switch again to turn off the
lights.
The vehicle power is switched to ACC
or OFF
All the turn signal lights flash and the
hazard warning light
in the
instrument cluster flashes.
Press the switch again to turn off the
lights.
Driving
Hazard Warning Lights
5-82
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Antilock Brake System(ABS)
The ABS prevents the wheels from
locking, caused by braking on slippery
roads, and maintains driving
directional stability and ensures
steerability.
NOTE
When depressing the brake pedal,
slight vibration might be felt from the
pedal. This vibration is a normal
occurrence when the ABS operates.
ABS does not operate at low speeds
(about 10 km/h (6.2 mph) or
slower).
Warning and Cautions forUsing the Antilock Brake System (ABS)
WARNING
Do not rely on the ABS as a substitute
for safe driving.
The ABS cannot compensate for unsafe
and reckless driving, excessive speed,
tailgating (following another vehicle
too closely), driving on ice and snow,
and hydroplaning (reduced tire friction
and road contact because of water on
the road surface). You can still have an
accident.
CAUTION
Always use tires of the specified size
and type for the front and rear wheels.
If a tire other than the specified size or
type is installed, the ABS system may
not operate normally.
Driving
Antilock Brake System (ABS)
5-84
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the TractionControl System (TCS)
Switch the vehicle power ON.
The TCS is operable.
When the TCS operates, the TCS/DSC
operation indicator light
flashes.
Stopping the TCS Operation
The TCS operation is canceled and the
TCS OFF indicator light
in the
instrument cluster and the TCS OFF
switch indicator light turn on.
Press the TCS OFF switch again to
enable the TCS operation.
NOTE
If the hybrid system is stopped while
the TCS operation is canceled, the
TCS becomes operational when the
hybrid system is started the next
time.
When the TCS is on and you attempt
to free the vehicle from being stuck,
the TCS will activate. Depressing the
accelerator will not increase engine
power and freeing the vehicle from
being stuck might be difficult. When
this happens, turn off the TCS.
If the TCS is canceled and the
following systems are operated, the
TCS becomes operational.
Smart Brake Support (SBS)
Mazda Radar Cruise Control
(MRCC)
Cruising & Traffic Support (CTS)
Driving
Traction Control System (TCS)
5-86
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the DynamicStability Control (DSC)
Drive the vehicle at a speed of about
20 km/h (13 mph) or faster.
The DSC is operable.
When the DSC operates, the TCS/DSC
operation indicator light
flashes.
Driving
Dynamic Stability Control (DSC)
5-89
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Trailer Stability Control(TSC)
The TSC is a system that increases the
stability of the vehicle during towing.
When vehicle sway occurs during
towing, the TSC controls the output of
the brakes and the hybrid system to
suppress swaying.
Warning and Cautions forUsing the Trailer Stability Control (TSC)
WARNING
Do not rely solely on the Trailer
Stability Control (TSC).
Vehicle stability can be limited even if
the Trailer Stability Control (TSC) is
operating. Drive carefully to prevent
accidents. In particular, if the
TCS/DSC indicator light is flashing ,
drive the vehicle carefully as it is in a
less stable condition and could sway
more easily. Drive with caution and in
accordance with the road, vehicle and
trailer conditions.
CAUTION
 The Trailer Stability Control (TSC)
may not operate correctly unless the
following are observed:
 Use tires of the correct size
specified for your Mazda on all
four wheels.
 Use tires of the same
manufacturer, brand and tread
pattern on all four wheels.
 Do not mix worn tires.
 The Trailer Stability Control (TSC)
may not operate correctly when tire
chains are used or a temporary spare
tire is installed because the tire
diameter changes.
Driving
Trailer Stability Control (TSC)
5-90
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the TrailerStability Control (TSC)
Drive the vehicle at a speed of 65
km/h (40 mph) or faster.
The TSC is operable.
When the TSC operates, the TCS/DSC
operation indicator light
flashes.
NOTE
The Trailer Stability Control (TSC)
does not operate if there is a
malfunction in the TCS/DSC (the
TCS/DSC operation indicator light
turns on).When the Trailer Stability Control
(TSC) is operating, the brake lights
may turn on.
For information regarding trailer
towing , refer to Towing on page
7-59.
Driving
Trailer Stability Control (TSC)
5-91
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04