clock MAZDA MODEL 3 4-DOOR 2004 Owner's Manual

8-41
Maintenance and Care
Owner Maintenance
Form No. 8S18-EA-03I
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order of removal. Brake lights/Taillights, Rear turn signal
lights (5 Door)
1. Remove the cover.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
3. Disconnect the bulb from the socket.
NOTE
To replace the bulb, contact an
Authorized Mazda Dealer.
Socket
Brake lights/Taillights
Rear turn signal lights
Left side
Right side
Socket
Brake lights/Taillights
Rear turn signal lights
J48C_8S18-EA-03I_Edition3.book Page 41 Monday, February 9, 2004 8:41 PM
Black process 45.0 ° 240.0 LPI

8-42
Maintenance and Care
Owner Maintenance
Form No. 8S18-EA-03I
4. Install the new bulb in the reverse order of removal.
Reverse light
4 Door
1. Pull the center section of the plastic retainer and remove the retainers, then
remove the trunk rear trim.
2. Turn the socket and bulb assembly counterclockwise and remove it.
3. Disconnect the bulb from the socket. 4. Install the new bulb in the reverse order
of removal.
5 Door
1. Remove the cover.
2. Turn the socket and bulb assembly counterclockwise and remove it.
3. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse order of removal.
NOTE
To replace the bulb, contact an
Authorized Mazda Dealer.
Removal
Installation
Trunk rear trim
Socket
NOTE
To replace the bulb, contact an
Authorized Mazda Dealer.
NOTE
To replace the bulb, contact an
Authorized Mazda Dealer.
Socket Cover
J48C_8S18-EA-03I_Edition3.book Page 42 Monday, February 9, 2004 8:41 PM
Black process 45.0 ° 240.0 LPI

8-43
Maintenance and Care
Owner Maintenance
Form No. 8S18-EA-03I
High-mount brake light
4 Door
1. Pull the center of each plastic retainer and remove the retainers and the trunk
rear trim.
2. Disconnect the electrical connector from the socket.
3. Turn the socket and bulb assembly counterclockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order of removal. 5 Door
1. Remove the liftgate upper trim.
2. Disconnect the electrical connector
from the socket.
3. Turn the socket and bulb assembly counterclockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order of removal.
NOTE
To replace the bulb, contact an
Authorized Mazda Dealer.
Removal
Installation
Trunk rear trim
Socket
NOTE
To replace the bulb, contact an
Authorized Mazda Dealer.
Liftgate upper trim
Socket
J48C_8S18-EA-03I_Edition3.book Page 43 Monday, February 9, 2004 8:41 PM
Black process 45.0 ° 240.0 LPI

8-44
Maintenance and Care
Owner Maintenance
Form No. 8S18-EA-03I
License plate lights
1. Wrap a flathead screwdriver with a soft cloth to prevent damage to the lens and
remove the lens by carefully prying on
the edge of the lens with a flathead
screwdriver.
2. Disconnect the bulb by pulling it out.
3. Install the new bulb in the reverse order of removal.

Replacing Interior Light Bulbs
Overhead light/Map lights (Front)*
1. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the trim and
gently insert it in the overhead light as
shown in the figure, and then remove
the overhead light unit.
2. Turn the socket and bulb assembly counterclockwise and remove it.
3. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse order of removal.
Edge
Socket
*Some models.
J48C_8S18-EA-03I_Edition3.book Page 44 Monday, February 9, 2004 8:41 PM
Black process 45.0 ° 240.0 LPI

8-46
Maintenance and Care
Owner Maintenance
Form No. 8S18-EA-03I
Yo u r v e h i c l e’s electrical system is
protected by fuses.
If any lights, accessories, or controls don ’t
work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.
If the same fuse blows again, avoid using
that system and consult an Authorized
Mazda Dealer as soon as possible.

Fuse Replacement
Replacing the fuses on the front
passenger
’s side below the glove box
If the electrical system doesn ’t work, first
inspect fuses on the front passenger ’s side
below the glove box.
1. Turn off the ignition switch and other switches.
2. Remove the cover. 3. Turn the knobs counterclockwise and
lower the fuse block.
4. Locate the position of the suspected fuse by using the chart inside the fuse
block cover.
5. Pull the fuse straight out with the fuse puller provided on the inside of the
engine compartment fuse block cover.
Fuses
Cover
Fuse block cover
Fuse puller
J48C_8S18-EA-03I_Edition3.book Page 46 Monday, February 9, 2004 8:41 PM
Black process 45.0 ° 240.0 LPI

11-2
Form No. 8S18-EA-03I
Index
A
Add-On Non-Genuine Parts and
Accessories
...................................... 9-13
Air Bag Systems
.............................. 2-36
Air Filter
.......................................... 8-23
Antenna
............................................ 6-10
Anti-Lock Brake System (ABS)
........ 5-7
Warning light
.............................. 5-8
Appearance Care
.............................. 8-51
Ashtray
............................................. 6-40
Audio System
................................... 6-10
Audio control switch
................ 6-32
Audio set
................................... 6-17
Operating tips for audio
system
....................................... 6-10
Safety certification
.................... 6-34
Automatic Transaxle Driving tips
............................... 5-16
Fluid
.......................................... 8-20
Manual shift mode
.................... 5-13
Shift-lock override
.................... 5-12
Shift-lock system
...................... 5-12
Transaxle ranges
....................... 5-11
B
Battery Emergency starting
................... 7-15
Maintenance
............................. 8-28
Specifications
........................... 10-4
Beep Sounds Ignition key reminder
............... 5-43
Lights-on reminder
................... 5-43
Seat belt warning beep
.............. 5-43
Tire inflation pressure warning
beep
........................................... 5-43
Before Starting the Engine
................. 4-6
After getting in
........................... 4-6
Before getting in
......................... 4-6
B
Body Lubrication ............................. 8-22
Bottle Holder
.................................... 6-42
Brake/Clutch Fluid
.......................................... 8-18
Brakes Anti-lock brake system (ABS)
....5-7
Brakes assist
................................5-8
Foot brake
................................... 5-4
Parking brake
.............................. 5-5
Warning light
.............................. 5-6
Break-In Period
.................................. 4-7
Bulb Replacement
............................ 8-36
C
Capacities ......................................... 10-5
Carbon Monoxide
.............................. 4-5
Cargo Securing Loops
...................... 6-43
Cargo Sub-Compartment
................. 6-44
Catalytic Converter
............................ 4-3
Cell Phones
...................................... 9-14
Center Console
................................. 6-43
Child Restraint Child restraint precautions
........ 2-21
Installing child-restraint
systems
...................................... 2-25
LATCH child-restraint
systems
...................................... 2-32
Child Safety Locks for Rear
Doors
.................................................. 3-9
Cigarette Lighter
.............................. 6-40
Climate Control System
.....................6-2
Gas specifications
..................... 10-6
Clock
................................................ 6-39
Cruise Control
.................................. 5-18
Cup Holder
....................................... 6-41
Customer Assistance
.......................... 9-2
J48C_8S18-EA-03I_Edition3.book Page 2 Monday, February 9, 2004 8:41 PM
Black process 45.0 ° 240.0 LPI

11-4
Index
Form No. 8S18-EA-03I
H
Hood Release ................................... 3-20
Horn
................................................. 5-53
I
Ignition Keys
............................................ 3-2
Switch
......................................... 5-2
Illuminated Entry System
................ 6-35
Immobilizer System
......................... 3-24
Indicator Lights
................................ 5-31
Cruise main
............................... 5-41
Cruise set
.................................. 5-41
Headlight high-beam
................ 5-40
power steering malfunction
...... 5-41
Security
..................................... 5-40
Shift position
............................ 5-40
Turn-signal/hazard warning
...... 5-42
Information Display
......................... 6-38
Audio display
............................ 6-39
Clock
......................................... 6-39
Information display functions
... 6-38
Inside Trunk Release Handle/
Slide Lever
....................................... 3-15
Instrument Cluster
........................... 5-26
Instrument Cluster Dimmer Select
Button
.............................................. 5-30
Interior Care
..................................... 8-57
Interior Lights
.................................. 6-35
J
Jump-Starting ................................... 7-16
K
Keyless Entry System ........................ 3-3
Keys
................................................... 3-2
L
Label Information ............................ 10-2
Lane-Change Signals
....................... 5-47
Liftgate
............................................. 3-10
Luggage compartment
.............. 3-11
Light Bulbs Replacement
.............................. 8-36
Specifications
............................ 10-7
Lighter
.............................................. 6-40
Lighting Control
............................... 5-44
Lubricant Quality
............................. 10-4
Luggage Compartment Light
........... 6-37
M
Maintenance Introduction
................................. 8-2
Owner maintenance
precautions
................................ 8-11
Owner maintenance schedule
... 8-10
Scheduled
.................................... 8-3
Manual Transaxle Operation
.............. 5-9
Recommendations for
shifting
...................................... 5-10
Map Lights
....................................... 6-37
Meters and Gauges
........................... 5-26
Mirrors Outside mirrors
......................... 3-29
Rearview mirror
........................ 3-31
Money-Saving Suggestions
................ 4-7
Moonroof
......................................... 3-21
O
Odometer and Trip Meter ................ 5-27
Outside Mirrors
................................ 3-29
Overhead Lights
............................... 6-36
Overheating
...................................... 7-13
Overloading
...................................... 4-12
J48C_8S18-EA-03I_Edition3.book Page 4 Monday, February 9, 2004 8:41 PM
Black process 45.0 ° 240.0 LPI

Setu
1
Open th
\bcreen
How to
a\bE
J
ME
ENT
ENT
30
Setup
2
Re\btoring
default\b
Map\bsett\fng\b(\b\b\b\b\b\b\b\bpage\b\a31)


On\b:\bIcons\bon\ba\bmap.
Off\b:\bNo\b\fcon\bon\ba\bmap.

The\bsett\fng\b\fs\ba\bvar\fable\b\ato\bsu\ft\byour\bprefere\ances.
Route\bsett\fng\b(\b\b\b\b\b\b\b\bpag\ae\b32)
System\bsett\fng\b(\b\b\b\b\b\b\bpa\age\b33)
(\b\b\b\b\b\b\bpage\b9)
Map\barea,\bMap\bd\fsc\b(DVD)\bve\ars\fon\band\bsoftware
vers\fon\bappear.
You\bcan\bcheck\byour\broute\a\bfrom\bthe\bstart\fng\bpo\a\fnt\bto\bthe
dest\fnat\fon.
Th\fs\bfunct\fon\b\fs\bava\flable\a\bafter\broute\bsetup\b\fs\a\bperformed.
You\bcan\bchange\band\bdelet\ae\bmarked\bpo\fnts.
(\b\b\b\b\b\b\b\bpage\b28)
(\b\b\b\b\b\b\b\bpage\b28)
Change\bthe\bveh\fcle\bpos\a\ft\fon.
Change\bthe\bveh\fcle\bd\fre\act\fon. :\b Rotat\fon\b\fn\ba\bclockw\fse\bd\a\frect\fon\bby\b11.25°.
:\bRotat\fon\b\fn\ba\bcountercl\aockw\fse\bd\frect\fonby\b11.25°.
 Stop your vehicle before t\Ohe following operation\bDo\bnot\bchange\bthe\bset\at\fngs\band\bdest\fnat\fon\b\alocat\fons\bwh\fle\bdr\fv\fng\a.\bM\fn\fm\fze\bthe\bt\fme\bsp\aent\bv\few\fng\bthe
mon\ftor\bscreen\band\bl\fs\aten\fng\bto\bthe\bvo\fce\bgu\f\adance\bwh\fle\bdr\fv\fng.\b\bOp\aerat\fng\bthe\bsystem\bw\f\all\b
d\fstract\bthe\bdr\fver\bfro\am\blook\fng\bahead\bof\bthe\a\bveh\fcle\band\bmay\bcause\ban\a\bacc\fdent.
Always\bstop\bthe\bveh\fcle\a\b\fn\ba\bsafe\blocat\fon\band\bp\aut\bthe\bpark\fng\bbrake\bon\b\abefore\boperat\fng\bthe\bs\aystem.
Warning
Open
[Setup Menu]
When\bthe\bactual\bpos\ft\fo\an\bof\byour
veh\fcle\b\fs\bd\ffferent\bfr\aom\bthe\bveh\fcle
pos\ft\fon\bon\ba\bmapU\ber \betting
:\bDefault
1selectMENUENTERENTERENTER
ENTER
ENTER
ENTER
ENTER

33
Open the
\bSyste\f Setup]
screen
Volu\fe control (5 leve\cls)

Beep
On : Beep ac\biva\bed wh\sen pressing bu\b\bons in \s\bhe
remo\be con\brol.
Off : Beep inac\biva\be\sd when pressing bu\b\bons\s in \bheremo\be con\brol.



Language

Changeover \feter/\file
Me\bric : Me\bersEnglish : Miles



Clock
Se\bs \bhe volume for vo\sice guidance and voi\sce feedback*.
When \bhe volume is se\b\s \bo 0, \bhe voice is \bu\srned off.
: Defaul\b

How to exit

Daylight Saving Ti\fe(Su\f\fer Ti\fe)
On : Dayligh\b saving \s\bime mode is enabled\s.
(The naviga\bion in\ber\snal clock gains 1 h\sour).
Off : Dayligh\b saving\s \bime mode is disable\sd.
Se\bupSys\bem
User setting
1
\fselec\b3
selec\bMENUENTER
ENTER
ENTER
ENTERENTER
ENTER
ENTER
ENTER
On : Ac\biva\bes voice f\seedback.
Off : Cancels voice \sfeedback.
* The opera\bion s\ba\bus i\ss announced by voice. (e.g. changing \bhe m\sap orien\ba\bion, s\bar\bi\sng or \bermina\bing
\bhe rou\be calcula\bion\s, s\baring or \bermina\b\sing \bhe simula\bion,
displaying \bhe maneuve\sr lis\b.)
Voice Feedback*
n\b
go back
om i\b.
a\bically proaching
inci.