ECO mode MAZDA MODEL 3 HATCHBACK 2015 (in English) Owner's Manual
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2015, Model line: MODEL 3 HATCHBACK, Model: MAZDA MODEL 3 HATCHBACK 2015Pages: 689, PDF Size: 7.08 MB
Page 152 of 689
*Some models.4–2
i-ACTIVSENSE............................... 4-100
i-ACTIVSENSE*........................ 4-100
Adaptive Front Lighting System
(AFS)
* ........................................ 4-103
High Beam Control System
(HBC)
*........................................ 4-104
Lane Departure Warning System
(LDWS)
* .................................... 4-107
Rear Vehicle Monitoring (RVM)
System
* ....................................... 4-114
Distance Recognition Support System
(DRSS)
* ...................................... 4-120
Mazda Radar Cruise Control
(MRCC)
* .................................... 4-123
Adjustable Speed Limiter* ......... 4-133
Smart City Brake Support
(SCBS)
* ...................................... 4-139
Smart Brake Support (SBS)* ...... 4-145
Forward Sensing Camera (FSC)* .... 4-148
Radar Sensor (Front)* ................. 4-150
Laser Sensor (Front)* ................. 4-153
Radar Sensors (Rear)* ................ 4-155
Cruise Control ................................. 4-156
Cruise Control
* ........................... 4-156
Tyre Pressure Monitoring System .... 4-161
Tyre Pressure Monitoring
System
* ....................................... 4-161
Diesel Particulate Filter (SKYACTIV-D
2.2) .................................................... 4-165
Diesel Particulate Filter
(SKYACTIV-D 2.2) ................... 4-165
Rear View Monitor .......................... 4-166
Rear View Monitor
* ................... 4-166 Parking Sensor System ................... 4-175
Parking Sensor System
* ............. 4-175
. B [ E B @ & ' & & " @ & E J U J P O J O E C
Page 163 of 689
*Some models.4–13
When Driving
Start/Stop Engine
i-stop *
The i-stop (idling stop) function automatically stops the engine when the vehicle is stopped
at a traffi c light or stuck in traffi c after the engine has been warmed up (SKYACTIV-G 1.5
, SKYACTIV-G 2.0) or other times when the engine is not cold (SKYACTIV-D 2.2), and
then restarts the engine automatically to resume driving. The system provides improved fuel
economy, reduced exhaust gas emissions, and eliminates idling noise while the engine is
stopped.
The driver is notifi ed of a system malfunction or the operation conditions by the i-stop
warning light (amber), i-stop indicator light (green), i-stop warning beep, and control status
display.
Engine stop and restart functions
(Manual transaxle)
1 . (Except European model)
The i-stop indicator light (green) illuminates when the i-stop conditions are met while the
vehicle is being driven.
2. Depress the brake pedal and then the clutch pedal, and bring the vehicle to a complete
stop.
3. After bringing the vehicle to a stop, shift the lever to the neutral position while
depressing the clutch pedal. The engine automatically stops after the clutch pedal is
released. The i-stop indicator light (green) also illuminates while the i-stop function is
operating.
4. To restart the engine, depress the clutch pedal (i-stop indicator light (green) turns off).
The i-stop indicator light (green) illuminates if the i-stop function conditions are met
again while driving (except European model).
Engine stop Restart
. B [ E B @ & ' & & " @ & E J U J P O J O E C
Page 164 of 689
4–14
When Driving
Start/Stop Engine
(Automatic transaxle)
1 . (Except European model)
The i-stop indicator light (green) illuminates when the i-stop conditions are met while the
vehicle is being driven.
2. The i-stop function operates when the brake pedal is depressed while driving the vehicle
(except for driving in reverse) and the vehicle is stopped. The i-stop indicator light
(green) also illuminates while the i-stop function is operating.
3. When the brake pedal is released while the selector lever is in the D/M position (not
second gear fi xed mode), the engine restarts automatically and the i-stop indicator light
(green) turns off. The i-stop indicator light (green) illuminates if the i-stop function
conditions are met again while driving (except European model).
With the selector lever in the N or P position, the engine will not restart even if the brake
pedal is released. If the brake pedal is depressed again, the engine will restart.
Engine stop Restart
CAUTION
(Automatic transaxle)
If any of the following conditions occurs, the i-stop function does not operate.
The wheels are not in the straight-ahead position.
The vehicle is stopped on a steep incline.
. B [ E B @ & ' & & " @ & E J U J P O J O E C
Page 166 of 689
4–16
When Driving
Start/Stop Engine
NOTE
(Automatic transaxle)
The selector lever is in the D/M position (not second gear fi xed mode) or the N
position.
The automatic transaxle fl uid has warmed up suffi ciently.
The automatic transaxle fl uid temperature is not abnormally high.
The steering wheel is positioned so that the wheels are pointed nearly straight ahead
(if force is applied to the steering wheel even with the wheels pointed straight ahead,
the i-stop function may not operate. Loosen your grip on the steering wheel to allow
the i-stop function to operate).
The brake pedal is depressed to stop the vehicle (if the i-stop indicator light (green)
fl ashes without the i-stop function operating, it is possible that the brake pedal
has not been depressed suffi ciently. Depress the brake pedal a little more strongly
(except European model)).
Emergency braking is not applied.
The vehicle is not stopped on a steep grade in a place such as a multilevel car
parking facility.
(SKYACTIV-D 2.2)
The fuel injection learning, which occurs periodically and automatically, is not
performed.
If any one of the following conditions occurs, extra time may be required for the
engine to stop automatically.
Battery power is depleted as a result of not using the vehicle for a long period.
The ambient temperature is high or low.
The battery leads have been disconnected for battery replacement and then
reconnected.
(SKYACTIV-D 2.2)
Particulate Matter (PM) is eliminated by the diesel particulate fi lter.
For safety reasons, if any one of the following operations is performed after the engine
has been automatically stopped, the i-stop warning light (amber) illuminates and the
engine will not restart automatically even if the clutch pedal is depressed (manual
transaxle) or the brake pedal is released (automatic transaxle). If this occurs, use the
standard engine starting procedure to start the engine.
The bonnet is opened.
The driver intends to get out of the vehicle (driver's seat belt is unfastened and
driver's door is opened).
. B [ E B @ & ' & & " @ & E J U J P O J O E C
Page 167 of 689
4–17
When Driving
Start/Stop Engine
NOTE
(Automatic transaxle) If the selector lever is shifted from D/M position (not second gear fi xed mode) to the
N position or from the D/M position (not second gear fi xed mode) to the P position
while the i-stop function is operating, the engine will not restart automatically even
if the brake pedal is released. The engine will restart if the brake pedal is depressed
again or the selector lever is shifted to the D/M position (not second gear fi xed mode)
or the R position. In addition, when the driver intends to get out of the vehicle while
the shift lever is in the N or P position (the driver's seat belt is unfastened and the door
is opened), the engine restarts (except European model). (For the purpose of safety,
always keep the brake pedal depressed when shifting the selector lever while the i-stop
function is operating.)
From D/M position (not second
gear fixed mode) to N position
From N position to D/M position (not
second gear fixed mode) or R positionFrom P position to D/M position (not
second gear fixed mode) or R positionFrom D/M position (not second
gear fixed mode) to P position
. B [ E B @ & ' & & " @ & E J U J P O J O E C
Page 168 of 689
4–18
When Driving
Start/Stop Engine
NOTE
If any one of the following operations is performed after the engine has been
automatically stopped (shift lever is in neutral position for vehicles with manual
transaxle), the engine will restart automatically even though the clutch pedal is not
depressed (manual transaxle) or the brake pedal is not released (automatic transaxle).
However, for safety reasons, if the shift lever is in a position other than neutral for
vehicles with manual transaxle, the engine will not restart automatically.
The i-stop OFF switch is pressed for several seconds.
(Dual-zone automatic air-conditioning)
The temperature setting dial of the air conditioning is set to maximum heating/
maximum cooling (A/C ON).
The windscreen defroster switch is on.
(Except European model)
The driver intends to get out of the vehicle (driver's seat belt is unfastened and any
door or the liftgate/boot lid is opened).
The brakes are released slightly on a slope and the vehicle begins to move.
(Automatic transaxle)
The accelerator pedal is depressed while the selector lever is in the D/M position
(not second gear fi xed mode).
The selector lever is shifted to the R position.
The selector lever is shifted from the N or P position to the D/M position (not second
gear fi xed mode).
The steering wheel is operated with the selector lever in the D/M position (not
second gear fi xed mode).
The selector lever is in the M position, second gear fi xed mode.
If any one of the following vehicle conditions occur after the engine has been
automatically stopped (shift lever is in neutral position for vehicles with manual
transaxle), the engine will restart automatically even though the clutch pedal is not
depressed (manual transaxle) or the brake pedal is not released (automatic transaxle).
However, for safety reasons, if the shift lever is in a position other than neutral for
vehicles with manual transaxle, the engine will not restart automatically.
(Dual-zone automatic air-conditioning)
There is a large difference between the cabin temperature and the temperature set for
the air-conditioning system.
Two minutes have elapsed since the i-stop function started operating.
The battery power is depleted.
. B [ E B @ & ' & & " @ & E J U J P O J O E C
Page 173 of 689
4–23
When Driving
Start/Stop Engine
i-stop indicator light (green)
When illuminated
This light illuminates while the i-stop function is operable or operating and the engine is
stopped automatically. The light turns off when the engine is restarted automatically.
When fl ashing
If any one of the following conditions occur, the light fl ashes twice per second as a safety
precaution to the driver.
(European model)
The light fl ashes when the driver's door is opened and turns off after it is closed.
(Manual transaxle)
The light fl ashes when the shift lever is shifted to a position other than neutral without
depressing the clutch pedal, and turns off after shifting the shift lever to the neutral
position.
(European model)
If any one of the following conditions occur, the light fl ashes once per second for a period
of about three seconds to notify the driver that the vehicle is about to restart automatically,
and then it turns off after the engine restarts.
(Dual-zone automatic air-conditioning)
The temperature setting dial for the air-conditioning system on the driver's side is set to
the maximum hot or cold position.
There is a large difference between the cabin temperature and the set temperature on the
air-conditioning system.
The windscreen defroster switch is on.
Two minutes have elapsed since the i-stop function started operating.
The battery power is depleted.
(Except European model)
This light fl ashes once per second if the brake pedal is not depressed with suffi cient force.
There may be instances when you may have not applied enough brake force. In this case,
depress the brake pedal a little more strongly.
. B [ E B @ & ' & & " @ & E J U J P O J O E C
Page 175 of 689
*Some models.4–25
When Driving
Instrument Cluster and Display
Trip Computer and INFO Switch .......................................................................... page 4-30
Speed Unit Selector ............................................................................................... page 4-25
Speedometer
The speedometer indicates the speed of the
vehicle.
Speed Unit Selector (Type A
instrument cluster) *
In some countries, you may have to
change the speed units between km/h and
mph.
Press the speed unit selector for 1.5
seconds or more.
The speed units for the speedometer will
change between km/h and mph.
Speedometer
Speed unit selector
Odometer, Trip Meter and Trip
Meter Selector
The display mode can be changed from
odometer to trip meter A to trip meter B
and then back to odometer by pressing the
selector while one of them is displayed.
The selected mode will be displayed.Type A/Type B
Press the selector
Press the selector
Press the selector Odometer
Trip meter A
Trip meter B
Type C
Press the selector
Press the selector
Press the selector Odometer
Trip meter A
Trip meter B
. B [ E B @ & ' & & " @ & E J U J P O J O E C
Page 176 of 689
4–26
When Driving
Instrument Cluster and Display
NOTE
When the ignition is switched to ACC
or off, the odometer or trip meters
cannot be displayed, however, pressing
the selector can inadvertently switch
the trip meters or reset them during an
approximate ten-minute period in the
following cases:
After the ignition is switched to off
from ON.
After the driver's door is opened.
Odometer
The odometer records the total distance
the vehicle has been driven.
Trip meter
The trip meter can record the total distance
of two trips. One is recorded in trip meter
A, and the other is recorded in trip meter
B.
For instance, trip meter A can record the
distance from the point of origin, and
trip meter B can record the distance from
where the fuel tank is fi lled.
When trip meter A is selected, pressing
the selector again within one second will
change to trip meter B mode.
When trip meter A is selected, TRIP A
will be displayed. When trip meter B is
selected, TRIP B will be displayed. The trip meter records the total distance
the vehicle is driven until the meter
is again reset. Return it to “0.0” by
depressing and holding the selector for
one second or more. Use this meter to
measure trip distances and to compute fuel
consumption.
NOTE
(Vehicles with type C/type D audio) If the fuel economy data is reset
using the fuel economy monitor,
or trip A is reset using the trip
meter when the function which
synchronizes the fuel economy
monitor and the trip meter is on, the
fuel economy data and trip A are
reset simultaneously.
Refer to Fuel Economy Monitor on
page 4-94 .
Only the trip meters record tenths of
kilometres (miles).
The trip record will be erased when:
The power supply is interrupted
(blown fuse or the battery is
disconnected).
The vehicle is driven over 9999.9
km (mile).
. B [ E B @ & ' & & " @ & E J U J P O J O E C
Page 177 of 689
*Some models.4–27
When Driving
Instrument Cluster and Display
Tachometer *
The tachometer shows engine speed in
thousands of revolutions per minute (rpm).
CAUTION
Do not run the engine with the
tachometer needle in the RED ZONE.
This may cause severe engine damage.
Type A
*1The range varies depending on the type
of gauge.*1
Striped zone
*1
Red zone
Type B
*1The range varies depending on the type
of gauge.*1
Striped zone
*1
Red zone
NOTE
When the tachometer needle enters the
STRIPED ZONE, this indicates to the
driver that the gears should be shifted
before entering the RED ZONE.
Fuel Gauge (Without Multi-
information display)
The fuel gauge shows approximately
how much fuel is remaining in the tank
when the ignition is switched ON. We
recommend keeping the tank over 1/4 full.
Digital speed meter type/Type A
instrument cluster/Type B instrument
cluster
Full
1/4 Full
Type C
Full
1/4 Full
If the low fuel warning light illuminates or
the fuel level is very low, refuel as soon as
possible.
Refer to Warning/Indicator Lights on page
4-40 .
. B [ E B @ & ' & & " @ & E J U J P O J O E C