brake MAZDA MODEL 3 HATCHBACK 2016 Quick Guide (in English)
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2016, Model line: MODEL 3 HATCHBACK, Model: MAZDA MODEL 3 HATCHBACK 2016Pages: 39, PDF Size: 1.23 MB
Page 7 of 39
When Driving
6For details, refer to Section 4, “Start/Stop Engine”.
Indicator light
Push button start
Starting the Engine
(SKYACTIV-D 1.5, SKYACTIV-D 2.2)
•The starter does not rotate until the glow indicator light turns off.
• When starting the engine, do not release the clutch pedal (manual transaxle) or
the brak
e pedal (automatic transaxle) until the glow indicator light in the
instrument cluster turns off and the engine starts, after pressing the push button
start.
1. Make sure the parking brake is on.
2. Continue to press the brake pedal firmly until
the engine has completely started.
3. (Manual transaxle)
Continue to press the clutch pedal firmly until
the engine has completely started.
(Automatic transaxle)
Put the vehicle in park (P). If you must restart the
engine while the vehicle is moving, shift into
neutral (N).
4. Press the push button start after both the KEY indicator
light (green) in the instrument cluster and the push button
start indicator light (green) illuminate.
• If the clutch pedal (manual transaxle) or the brake pedal (automatic transaxle) is
released before the engine starts, depress the clutch pedal (manual transaxle) or
the brak
e pedal (automatic transaxle) again and press the push button start to
start the engine.
• If the ignition is left switched ON for a long period of time without the engine
running after the glow plugs are warmed up, the glow plugs may warm up again
which will illuminate the glow indicator light.
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 8 of 39
When Driving
Manual transaxle
2. While depressing the clutch pedal, shift the shift lever to the neutral position.
Engine idling stops after the clutch pedal is released.
3.(SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5)
1. Stop the vehicle by depressing the brake pedal and then the clutch pedal.
The engine restarts automatically when you depress the clutch pedal or start to
release it.
NOTE
The engine restart timing varies depending on the brake pedal depression force.
Operation of i-stop Function
The i-stop function automatically stops the engine when the vehicle is stopped at a
traffic light or stuck in traffic, and then restarts the engine automatically to resume
driving. The system provides improved fuel economy, reduced exhaust gas
emissions, and eliminates idling noise while the engine is stopped.
NOTE
•When engine idling is stopped.
• The i-stop indicator light (green) turns on under the following conditions:
Engine idling stop conditions are met while the v
ehicle is being driven. •
(Except European model)
•The i-stop indicator light (green) turns off when the engine is restarted.
(SKYACTIV-D 1.5, SKYACTIV-D 2.2)
The engine restarts automatically when the clutch pedal is depressed.
7For details, refer to Section 4, “Start/Stop Engine”.
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 9 of 39
8
When Driving
For details, refer to Section 4, “Start/Stop Engine”.
i-stop OFF Switch
The i-stop function can be turned off by
pressing the switch until the beep sounds and
the i-stop warning light (amber) in the
instrument cluster illuminates.
The i-stop function can be turned back on by
pressing the switch again until the beep sounds
and the i-stop warning light (amber) turns off.Automatic transaxle
2. The engine restarts automatically when the brake pedal is released with the
selector lever in the D or M position (not in second gear fixed mode). 1. Engine idling stops when the brake pedal is depressed while the vehicle is
driven (except for driving in the R or M position second gear fixed mode) and
the vehicle is stopped.
3. If the selector lever is in the N or P position, the engine does not restart when the
brake pedal is released. The engine restarts when the brake pedal is depressed
again or the selector lever is shifted to the D, M (not in second gear fixed mode)
or the R position. (For the purposes of safety, always keep the brake pedal
depressed when shifting the selector lever while engine idling is stopped.)
Operation of i-stop Function
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 11 of 39
When Driving
For details, refer to Section 4, “Instrument Cluster and Display”.
Warning Lights
Signal Warning
1
2
3
4
5
6
7
8
9
10Charging System Warning Light Brake System Warning Light
Engine Oil Warning Light
High Engine Coolant Temperature
Warning Light
i-stop Warning Light
Power Steering Malfunction Warning
Light
Master Warning Light
Electric Parking Brake Warning
Light
Check Engine Light
11
12
13
14Automatic Transaxle Warning Light
Air Bag/Front Seat Belt Pretensioner
System Warning Light
Tyre Pressure Monitoring System
Warning Light
15KEY Warning Light
Adaptive LED Headlights (ALH)
Warning Light20Mazda Radar Cruise Control
(MRCC) Warning Light
Lane Departure Warning System
(LDWS) Warning Light
Low Fuel Warning Light
120 km/h Warning Light
Seat Belt Warning Light (Front seat)
Low Washer Fluid Level Warning
Light
Door-Ajar Warning Light Signal Warning
ABS Warning Light
These lights turn on or flash to notify the user of the system operation status or a
system malfunction.
19Lane-keep Assist System (LAS) &
Lane Departure Warning System
(LDWS) Warning LightLED Headlight Warning Light
Smart Brake Support/Smart City
Brake Support (SBS/SCBS) Warning
Light
21 16
17
18
22
23
24
25
10
Seat Belt Warning Light (Rear seat)
26
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 12 of 39
When Driving
30
For details, refer to Section 4, “Instrument Cluster and Display”.
Indication/Indicator Lights
Signal Indicator Lights
1
2
3
4
5
6
7
8
9
10KEY Indicator Light Blind Spot Monitoring (BSM) OFF
Indicator Light
Security Indicator Light
Vehicle Speed Alarm Indication
Glow Indicator Light
Diesel Particulate Filter Indicator
Light
Wrench Indicator Light
Low Engine Coolant Temperature
Indicator Light
i-stop Indicator Light
11
12
13
14i-ELOOP Indicator Light
Shift Position Indication
Lights-On Indicator Light
15Headlight High-Beam Indicator
Light20Rear Fog Light Indicator Light
Electric Parking Brake Indicator
Light
Brake Pedal Operation demand
Indicator Light
Mazda Radar Cruise Control
(MRCC) Indicator Light
Smart Brake Support/Smart City
Brake Support (SBS/SCBS)
Indicator Light
Smart Brake Support/Smart City
Brake Support (SBS/SCBS) OFF
Indicator Light
Seat Belt Warning Light (Rear seat)
Cruise Main Indicator Light
Cruise Set Indicator Light
Adjustable Speed Limiter Main
Indicator Light Signal Indicator Lights
Lane Departure Warning System
(LDWS) OFF Indicator Light
These lights turn on or flash to notify the user of the system operation status or a
system malfunction.
19
TCS/DSC Indicator Light
DSC OFF Indicator Light
29Select Mode Indicator Light
Adaptive LED Headlights (ALH)
Indicator Light
21 17
18
22
23
24
25
26
27
28
Direction Indicator/Hazard Warning
Indicator Lights
Front Fog Light Indicator Light
16Adjustable Speed Limiter Set
Indicator Light 31
11
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 13 of 39
12
When Driving
Lock-release
button
For details, refer to Section 4, “Automatic Transaxle” or “Drive selection”.
Drive Selection
Drive Selection Switch Drive selection is a system to switch the vehicle's drive mode. When the sport mode
is selected, vehicle's response against accelerator operation is enhanced. This
provides additional quick acceleration which may be needed to safely make
manoeuvres such as lane changes, merging onto freeways, or passing other vehicles.
Press the drive selection switch forward “ ( ) ” to select the sport mode. Pull
the drive selection switch back “ ( ) ” to cancel the sport mode.
With Electric Parking Brake
Without Electric Parking Brake
Select Mode Indicator Light
When the sport mode is selected, the
select mode indicator light turns on in
the instrument cluster.
Automatic Transaxle ControlsVarious Lockouts:
Indicates that you must depress
the brake pedal and hold in the
lock-release button to shift (The
ignition must be switched ON).
Indicates the selector lever can be
shifted freely into any position.
Indicates that you must hold in
the lock-release button to shift.
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 15 of 39
When Driving
For details, refer to Section 4, “i-ACTIVSENSE”.
i-ACTIVSENSE
i-ACTIVSENSE is a collective term covering a series of advanced safety and driver
support systems which make use of a Forward Sensing Camera (FSC) and radar sensors.
These systems consist of active safety and pre-crash safety systems.
Driver awareness support systems
Adaptive LED Headlights (ALH)
Lane Departure Warning System (LDWS)
Blind Spot Monitoring (BSM)
Distance Recognition Support System (DRSS)
These systems are designed to assist the driver in safer driving by reducing the load on
the driver and helping to avert collisions or reduce their severity. However, because each
system has its limitations, always drive carefully and do not rely solely on the systems.
Active Safety Technology
Active Safety Technology supports safer driving by helping the driver to recognise
potential hazards and avert accidents.
Nighttime visibility
Left/right side and rear side detection
Inter-vehicle distance recognition
Rear Cross Traffic Alert (RCTA)
Rear obstruction detection when leaving a parking space
Mazda Radar Cruise Control (MRCC)
Driver support systems
Collision damage reduction in low vehicle speed range
Advanced Smart City Brake Support (Advanced SCBS)
Pre-Crash Safety Technology
Pre-crash safety technology is designed to assist the dri
ver in averting collisions or
reduce their severity in situations where they cannot be avoided.
Forward driving
Smart Brake Support (SBS)
Collision damage reduction in medium/high speed range
Inter-vehicle distance
Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS)
Lane departure
Adjustable Speed Limiter
Speed control
Smart City Brake Support [Reverse] (SCBS R)Reverse driving
14
Road sign recognition
Traffic Sign Recognition System (TSR)
Smart City Brake Support [Forward] (SCBS F) Driver fatigue detection
Driver Attention Alert (DAA)
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 19 of 39
18
When Driving
For details, refer to Section 4, “i-ACTIVSENSE”.
Traffic Sign Recognition System (TSR)
If the vehicle speed exceeds the speed limit sign displayed on the active driving
display, the warning sound is activated and the area around the speed limit sign
displayed on the active driving display flashes 3 times in amber, and if the vehicle
speed continues to exceed the displayed speed limit sign, the indication stops
flashing and remains on. Check the surrounding conditions and adjust the vehicle
speed to the legal speed using the appropriate operation such as depressing the
brake pedal.
Excessive Speed Warning
NOTE
The Traffic Sign Recognition System (TSR) does not operate if there is a
malfunction in the Forward Sensing Camera (FSC).
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 20 of 39
When Driving
19
Mazda Radar Cruise Control (MRCC) system
The Mazda Radar Cruise Control (MRCC) system is designed to maintain headway control*1
according to the vehicle speed using a radar sensor (front) to detect the distance to a vehicle
ahead, which frees the driver from having to constantly use the accelerator or brake pedals.
Additionally, if your vehicle starts closing in on the vehicle ahead because, for example, the
vehicle ahead brakes suddenly, a warning sound and a warning indication in the display are
activated simultaneously to alert you to maintain a sufficient distance between the vehicles.
The possible vehicle speed setting ranges are as follows:
For details, refer to Section 4, “i-ACTIVSENSE”.
Use the Mazda Radar Cruise Control (MRCC) system on expressways and other
highways which do not require a lot of repeated acceleration and deceleration.
•(European models)
About 30 km/h (19 mph) to 200 km/h (124 mph)
•(Except European models)
About 30 km/h (19 mph) to 145 km/h (90 mph)
Do not rely completely on the Mazda Radar Cruise Control (MRCC) system
and always drive carefully:
The Mazda Radar Cruise Control (MRCC) system is designed to reduce load on the
driver, and although it maintains a constant vehicle speed, or specifically, it
maintains a constant distance between your vehicle and the detected vehicle ahead
according to the vehicle speed, the system has detection limitations depending on the
type of vehicle ahead and its conditions, the weather conditions, and the road
conditions. Additionally, the system may be unable to decelerate sufficiently to avoid
hitting the vehicle ahead if the vehicle ahead applies the brakes suddenly or another
vehicle cuts into the driving lane, which could result in an accident. Always verify
the safety of the surrounding area and depress the brake pedal or accelerator pedal
while keeping a safer distance from vehicles ahead or on-coming vehicles.
WARNING
Do not use the Mazda Radar Cruise Control (MRCC) system in the
following locations. Otherwise, it could lead to an accident:
•Roads with sharp curves and where vehicle traffic is heavy and there is
insufficient space between vehicles. Roads where frequent and repetitive
acceleration and deceleration occur.
•When entering and exiting interchanges, service areas, and parking areas of highways.
•Slippery roads such as ice or snow-bound roads.
•Long descending slopes.
*1 Headway Control: Control of the distance between your vehicle and the vehicle ahead
detected by the Mazda Radar Cruise Control (MRCC) system.
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 21 of 39
When Driving
20
Mazda Radar Cruise Control (MRCC) system
The Mazda Radar Cruise Control (MRCC) system may be cancelled during rain,
fog, snow or other inclement weather conditions, or when the front surface of the
radiator grille is dirty.
NOTE
In the following cases, the Mazda Radar Cruise Control (MRCC) is temporarily
cancelled, the Mazda Radar Cruise Control (MRCC) set indication (green) is
turned off, and the Mazda Radar Cruise Control (MRCC) main indication
(white) is turned on. In addition, for vehicles equipped with the active driving
display, the colour of the Mazda Radar Cruise Control (MRCC) indicator light
changes from green to white.
• The OFF/CAN switch is pressed once.
• The brake pedal is depressed.
• The parking brake is applied.
The selector lever is shifted to park (P), neutral (N) or reverse (R).
• The DSC, Smart Brake Support (SBS) system, Smart City Brake Support
(SCBS) or Advanced Smart City Brake Support (Advanced SCBS) has
operating.
• A system malfunction is detected.
Other details are described in the related text.
• (Automatic transaxle)
• (Manual transaxle)
The shift lever is in the reverse (R) position .
• Any door is opened.
• The driver's seat belt is unfastened.
For details, refer to Section 4, “i-ACTIVSENSE”.
/ C \ F C A ( , ' ' ' A ' F K V K Q P A 3 W K E M ) W K F G K P F D