seat memory MAZDA MODEL 6 2009 Smart Start Guide (in English)

3
Seats
ELECTRONiCALLY OPERATED DRiVER SEAT w/MEMORY
Slide/Tilt Switch
Push forward or backward to slide seat
bottom. Seat can also be raised, lowered or
tilted with this control.
To Program the Driver’s Seat Position:
1 Park vehicle.
2
Adjust seat to desired position using the Slide/ Tilt and Recline switches.
3
While pushing the memory seat SET button, push one of the three
programming buttons until beep is heard. Programming is now
complete. Program the remaining two buttons as desired.
To return to the programmed position:
•
When entering the vehicle with the door open and the ignition OFF,
the seat will move to the programmed position with one touch of the
button (1, 2 or 3).
•
In all other situations (door closed or engine running), you must push and
hold the button (1, 2 or 3) to move the seat to the programmed position.
NOTE:
•
Memory seat functions do not operate while the vehicle is in motion.

• You can also program one seat position for each advanced key/retractable type
key used with the vehicle. See Owner’s Manual for programming instructions.
Lumbar Adjustment
Rotate clockwise to
increase support and
counterclockwise to
decrease support.
Recline Switch
Push forward or backward
to adjust seatback angle.
Memory Seat Switch
189242_09c_Mazda6_SSG_112108.indd 411/21/08 3:19:25 PM