seat memory MAZDA MODEL 6 2014 Owners Manual (in English)
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2014, Model line: MODEL 6, Model: MAZDA MODEL 6 2014Pages: 576, PDF Size: 8.58 MB
Page 20 of 576

Black plate (20,1)
NOTElIf the ignition is switched off while the seat
warmer is operating (High, Mid or Low)
and then switched ON again, the seat
warmer will automatically operate at the
temperature set before switching off the
ignition.
lUse the seat warmer when the engine is
running. Leaving the seat warmer on for
long periods with the engine not running
could cause the battery power to be
depleted.
lThe temperature of the seat warmer cannot
be adjusted beyond High, Mid and Low
because the seat warmer is controlled by a
thermostat.
qSeat Position Memory (Driver's
seat)í
The seat position memory function allows
you to program the driver's seat to a
desired seat position and to call up a
programmed position with the simple
touch of a button.
CAUTION
Do not place fingers or hands around
the bottom of the seat while the seat
memory function is operating. The
seat moves automatically while the
seat memory function is operating
and fingers or hands could get
pinched and injured.
SET button
The seat position can be programmed or
operated using the following operations.
lOperation of the buttons on the side of
the seat.
lOperation using the key.
NOTE
lIndividual seat positions can be
programmed to the two available
programming buttons on the side of the
driver's seat, plus one seat position for each
registered key.
lIf the vehicle has been serviced and the
battery cables disconnected, the
programmed seat positions will have been
erased. Re-program the seat positions.
Programming
1. Switch the ignition OFF.
2. Adjust the seat to the desired position
using the slide lifter and reclining
switches.
Refer to Seat Operation on page 2-5.
3. Press and hold the memory SET button
until a beep sound is heard.
2-8
Essential Safety Equipment
íSome models.
Seats
Mazda6_8DQ8-EA-13L_Edition3 Page20
Friday, June 13 2014 6:20 PM
Form No.8DQ8-EA-13L
Page 21 of 576

Black plate (21,1)
4. Perform one of the following settings
within 5 seconds of completing step 3
above:
lTo program memory button 1 or 2,
press and hold the button until a
beep sound is heard.
lTo program a key, press and hold
the key
switch until a beep sound
is heard.
Adjusting a programmed position
(Programming to a button on the seat
side)
1. While the vehicle is stopped, press the
programming button for the seat
position you want to call up (button 1
or 2).
2. A beep sound is heard when the seat
position adjustment is completed.NOTE
lIf seat movement is not required, only the
beep sounds.
lWhen the ignition is switched ON, the seat
position memory function does not operate
unless the selector lever is in the P position
(Automatic transaxle) or the parking brake
is applied (Manual transaxle).
lWhen the ignition is switched OFF, the seat
position memory function is operable while
the selector lever is in a position other than
P position (Automatic transaxle) or the
parking brake is not applied (Manual
transaxle), however, if the ignition is
switched ON while the seat position
memory function is operating, the operation
is stopped.
lThe seat position adjustment is canceled in
the following cases:
lAny of the seat adjustment switches is
operated.
lThe SET button is pressed.lProgramming button 1 or 2 is pressed.lThe key lock switch or unlock switch is
operated.
lThe vehicle starts moving.
(When programming to the key)
1. Unlock the doors by pressing a request
switch or the key
switch.
2. After unlocking the doors, the seat
position adjustment begins within 40
seconds of opening the driver's door,
and a beep sounds when the operation
is finished.
Essential Safety Equipment
Seats
2-9
Mazda6_8DQ8-EA-13L_Edition3 Page21
Friday, June 13 2014 6:20 PM
Form No.8DQ8-EA-13L
Page 22 of 576

Black plate (22,1)
NOTElIf there is no seat position movement, a
beep is not heard.
lWhen the ignition is switched ON, the seat
position memory function does not operate
unless the selector lever is in the P position
(Automatic transaxle) or the parking brake
is applied (Manual transaxle).
lWhen the ignition is switched OFF, the seat
position memory function is operable while
the selector lever is in a position other than
P position (Automatic transaxle) or the
parking brake is not applied (Manual
transaxle), however, if the ignition is
switched ON while the seat position
memory function is operating, the operation
is stopped.
lThe seat position adjustment is canceled in
the following cases:
lAny of the seat adjustment switches is
operated.
lThe SET button is pressed.lProgramming button 1 or 2 is pressed.lThe keyswitch orswitch is
operated.
lThe vehicle starts moving.
Erasing programmed seat positions
(Erasing the seat positions programmed
to the key)
1. Switch the ignition OFF.
2. Continue pressing the seat SET button
until a beep sound is heard.
3. After the beep sounds, press the key
switch continuously within 5 seconds
until the beep sounds.
Rear Seat
qSplit Folding
By lowering the rear seatbacks the
luggage compartment space can be
expanded.
WARNING
Do not drive the vehicle with occupants
on folded down seatbacks or in the
luggage compartment.
Putting occupants in the luggage
compartment is dangerous because
seat belts cannot be fastened which
could lead to serious injury or death
during sudden braking or a collision
Do not allow children to play inside the
vehicle with the seatbacks lowered.
Allowing children to play in the
vehicle with the seatbacks folded
down is dangerous, If a child enters
the luggage compartment and the
seatbacks were raised back up, the
child may become trapped in the
luggage compartment which could
lead to an accident.
Tightly secure cargo in the luggage
compartment when it is transported
with the seatbacks folded down.
Driving without tightly securing
cargo and luggage is dangerous as it
could move and become an
obstruction to driving during
emergency braking or a collision
resulting in an unexpected accident.
2-10
Essential Safety Equipment
Seats
Mazda6_8DQ8-EA-13L_Edition3 Page22
Friday, June 13 2014 6:20 PM
Form No.8DQ8-EA-13L
Page 573 of 576

Black plate (573,1)
R
Replacement
Electrical battery ......................... 6-32
Fuse ............................................ 6-51
Light Bulbs ................................ 6-40
Tires ........................................... 6-36
Wheel ......................................... 6-37
Wiper .......................................... 6-27
Rocking the Vehicle .......................... 3-47
S
Safety Defects, Reporting ................. 8-14
Satellite Radio ................................... 5-44
Scheduled Maintenance ...................... 6-4
Seat
Seat Position Memory
(Driver's seat) ............................... 2-8
Seat Belt System
3-point type ................................ 2-17
Automatic locking ...................... 2-16
Emergency locking .................... 2-16
Extender ..................................... 2-20
Pregnant women ........................ 2-16
Seats
Front seat ...................................... 2-5
Head restraint ............................. 2-12
Rear seat ..................................... 2-10
Seat warmer .................................. 2-7
Security System
Immobilizer system .................... 3-41
Theft-deterrent system ............... 3-43
Sensor
Radar Sensor .............................. 4-78
Service Publications .......................... 8-51
S
Smart City Brake Support (SCBS) .... 4-86
Laser Sensor Handling ............... 4-90
Stopping The Smart City Brake
Support
(SCBS) System Operation ......... 4-91
Spare Tire ............................................ 7-6
Specifications ...................................... 9-4
Speedometer ...................................... 4-11
SPORT Mode Indicator Light ........... 4-44
SRS Air Bags
Front passenger occupant
classification system .................. 2-54
How the SRS air bags work ....... 2-47
Limitations to SRS air bag ......... 2-52
Monitoring ................................. 2-60
SRS air bag deployment
criteria ........................................ 2-51
Supplemental restraint system
components ................................ 2-45
Starting the Engine .............................. 4-3
Steering Wheel .................................. 3-29
Horn ........................................... 4-73
Storage Compartments .................... 5-119
Cargo sub-compartment ........... 5-121
Center console .......................... 5-120
Glove compartment .................. 5-120
Luggage Compartment ............. 5-121
Overhead console ..................... 5-119
Rear coat hooks ........................ 5-121
Storage pocket .......................... 5-119
Storage Pocket ................................ 5-119
Sunshade ........................................... 3-40
Sunvisors ......................................... 5-112
T
Tachometer ........................................ 4-12
Theft-Deterrent System ..................... 3-43
Index
10-7
Mazda6_8DQ8-EA-13L_Edition3 Page573
Friday, June 13 2014 6:23 PM
Form No.8DQ8-EA-13L