brake MAZDA MODEL CX-3 2018 Smart Start Guide (in English)
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2018, Model line: MODEL CX-3, Model: MAZDA MODEL CX-3 2018Pages: 50, PDF Size: 3.76 MB
Page 3 of 50
TABLE OF \bONTENT\f
m{zd{ C X-3
2 Driver's View
4
A
dvanced Keyless Entry
5
S
tarting the Engine
6
T
ire Pressure Monitoring System
7
S
eats
8
MAZD
A CONNECT Infotainment System
10
MAZD
A CONNECT Settings
12
C
ommander Switch
13
V
oice Control
14
B
luetooth
®
16 Navigation System
19
A
ctive Driving Display 2
0
Mazda Radar Cruise Control
22 Smart City Brake Support
2
3 Smart Brake Support
24 L
ane Departure Warning System
26 Distance Recognition Support System
27 Traffic Sign Recognition
28 Bl
ind Spot Monitoring System
29 Rear Cross Traffic Alert
3
0 Lighting / Turn Signals
31 Wi
per / Washer Control
32 Adaptive Front\flighting System
33 High Beam Control
34 Audio Controls
36 Audio USB and AUX Inputs
38 A
utomatic Climate Control
39 H
eated Steering Wheel
40 I
nstrument Cluster
42 T
ransmission
44 Pe
rsonalize Your CX\f3
2940109_18b CX-3 SSG_060817.indd 46/8/17 2:37 PM
Page 7 of 50
m{zd{ c x-3 5
STARTING THE ENGINE WITH ACCELERATED WARM-UP SYSTEM (AWS)
The CX\f3 is equipped with \XSKYACTIV combustion
technology. This technology includes AWS for optimal
emission performance during cold\fstart conditions.
While Carrying the Advanced Key: •
\fTART THE ENGINE by pushing the \fTART/\fTOP ENGINE
button while pushing t\.he brake pedal.
•
WHAT WILL YOU NOTI\bE? On start-up, the engine speed\.
and sound are elevated (1500 RPM) for less than one minute to quickly bring th\.e catalyst to efficient operating temperature. The RPM will reduce to idle once the
temperature is achieved. This is normal engi\.ne operation under cold-start conditions.
• WHAT DOE\f THI\f DO? This reduces emissions and allows Mazda to improve efficiency.
•
\fHUT THE ENGINE OFF\. by making sure the vehicle is in Park and setting the electric \.
parking brake, then push the \fTART/\fTOP ENGINE button.
•
A\bTIVATE A\b\bE\f\fORIE\f (A\b\b) by pushing the \fTART/\fTOP ENGINE button once
without pushing th\.e brake pedal.
•
TURN THE IGNITION \.TO THE ON PO\fITION by pushing the \fTART/\fTOP ENGINE button
twice without pushing \.the brake pedal.
EMERGENCY ENGINE STOP
Pushing and holdin\.g the \fTART/\fTOP ENGINE button or repeatedly pushing the
\fTART/\fTOP ENGINE button while the engin\.e is running will \.turn the engine OFF\.. Use only in case of an emergency.
NOTE: You can drive the vehicle during AW\f activation; there is no need to wait. The
engine may not start if the key cannot be detected. The key indicator light may flash RED
or “Key not detected” may be displayed if the key is placed in the cup holder.
If the \fTART/\fTOP ENGINE button indicator light flashes AMBER, this could indicate a
problem with the eng\.ine starting system. You may not be able to start the engine or
switch the ignition to A\b\b or ON. Have your vehicle inspected at an Authorized Mazda Dealer as soon as possible.
\fTARTING THE ENGINE
START/STOP ENGINE button
2940109_18b CX-3 SSG_060817.indd 56/8/17 2:37 PM
Page 8 of 50
6 MAZDAUSA.COM
TIRE PRESSURE MONITORING SYSTEM (TPMS)
For your safety, the CX\f3 is
equipped with TPMS that detects low tire pressure in one or more
tires. If the tire pressure starts
getting low in one or more tires, the system alerts the driver by
turning on a light in the instrument
cluster (p. 40\f41) and sounding an
alarm.
WHAT TO DO? Don’t ignore the TPM\f warning light. \ftop and check
your tire pressure (when tires are cold) and inflate the tires to the proper pressure. Properly inflated tires are safer, last longer, and increase fuel economy.
In the following cases, the TPMS must be “initialized” so the system
can operate normally.
• The tire pressure is adjusted (up or down) in one or more tires.
• A tire rotation is performed.
• Any tire or wheel is replaced.
•
The vehicle’s battery is disconnected, replaced or completely dead.
INITIALIZATION PROCESS
(TPMS WARNING LIGHT IS ILLUMINATED)
1 Park the vehicle in a safe place and firmly apply \.the parking brake.
2
Let the tires cool, then adjust the tire pressure to the specified
pressure (see tire label located on the driver’s side door jamb a\.rea)
on all four tires.
3 \fwitch the ignition ON\., but leave the vehicle parked.
4
Push and hold the \.TPM\f “\fet \fwitch" (left side of dash) until the
TPM\f warning light in the instrument cluster flashes twice and a beep sound is heard once.
NOTE: Drastic changes in temperature or altitude can affect the air
pressure in the tires and may cause the TPM\f warning light to turn on.
Verify the tire pressures when driving thr\.ough extreme temperature or altitude changes.
TPMS “Set Switch”
TIRE PRE\f\fURE MONITORING \fY\fTEM
CAUTION:
If the TPM\f “\fet
\fwitch” is pushed
without adjusting the tire pressure,
the system
cannot detect the normal tire
pressure. The
TPM\f warning light may not turn
on, even if the tire pressure is low, or it may turn on if
the tire pressure is normal.
2940109_18b CX-3 SSG_060817.indd 66/8/17 2:37 PM
Page 21 of 50
m{zd{ c x-3 19
A\bTIVE DRIVING DI\fPLA\.Y
(IF EQUIPPED)
ACTIVE DRIVING DISPLAY
To change the settings/adjustments for the Active Driving Display:
1 \felect the \fettings icon on the Home screen.
2 \felect the AD-Disp \.tab.
3 \felect the desired item to change.
HEIGHT: Adjust the position of the virtual image of
the Active Driving Display up or down.
BRIGHTNESS CONTROL: Method for adjusting
screen brightness (automatically with instrument
cluster illumination or\. manually).
CALIBRATION: Brightness initialization setting
(when selecting automatic adjustment).
BRIGHTNESS: Brightness adjustment (when
selecting manual ad\.justment).
NAVIGATION: On/Off.
ACTIVE DRIVING DISPLA\XY: On/Off.
RESET: Reset to default settings.
NOTE:
•
If the display does not operate, switch the ignition
OFF and then switch it back ON. If it still does not
operate even with the igniti\.on switched ON, have the vehicle inspected at an Authorized
Mazda Dealer.
•
It may be difficult to view the display when wearing sunglasses.
Take off your sunglasses or adjust the luminosity.
•
If the battery has been removed and re-installed or the battery
voltage is low, the adjusted position may deviate.
•
The display may be difficult to view or be temporarily affected by
weather conditions such as \.rain, snow, light, and temperature.
Vehicle Speed Setting using cruise control
Navigation Turn\fBy\fTurn(TBT) direction, distance and lane guidance
Traffic Sign Recognition(TSR) using navigation
55Speed Limit
IF EQUIPPED
Lane Departure Warning
System (LDWS) operation conditions and warnings
Smart Brake Support (SBS) warnings
Vehicle Speed Setting using cruise control
CAUTION:
Always adjust the
display using the
\fettings screen
(AD-Disp tab).
DO NOT try to
adjust the angle
or open/close the
display by hand.
Fingerprints on
the display will
make it difficult to
view and manual
operation could
cause damage.
2940109_18b CX-3 SSG_060817.indd 196/8/17 2:38 PM
Page 22 of 50
20 MAZDAUSA.COM
MAZDA RADAR CRUISE CONTROL (MRCC) SYSTEM
The MRCC system maintains vehicle speed and f\Xollowing distance using a radar sensor
to detect a vehicle ahead. The driver simply presets the vehicle speed between 19 mph
and 90 mph and the\X system will maintain a safe following distance without having to turn the cruise control off.
SETTING THE MRCC:
When the MODE switch is pushed, the
vehicle speed and t\.he distance between
vehicles while in headway control can be
set. The MR\b\b indication is shown in the
Active Driving Display.
NOTE: The radar for the MR\b\b is located
behind the Mazda emblem in the g\.rille.
Keep this area clean to avoid the system
not working properly.
How to set the speed:
1 Adjust the vehicle to the desired speed using the\. accelerator pedal.
2
Push the \fET + or \f\.ET – switch. The set speed and the in\.ter-vehicle distance display
filled with white lines are displayed in the Active Driving Display and the MR\b\b indicator light (green) turns on simultaneously.
MAZDA RADAR \bRUI\fE \bONTROL
(IF EQUIPPED)
OPERATION MODES
MODE DISPLAY
\bonstant \fpeed
Headway \bontrol
MRCC
WARNING:
MR\b\b shuts off
when it reaches the low mph limit.
The vehicle will not brake/stop by itself. \fwitch the
MR\b\b system off
when not in use.
Vehicle ahead
MRCC distance
between vehicles
Active Driving Display
MRCC set
vehicle speed
2940109_18b CX-3 SSG_060817.indd 206/8/17 2:39 PM
Page 23 of 50
m{zd{ c x-3 21
MAZDA RADAR \bRUI\fE \bONTROL
(IF EQUIPPED)
How to set the distance between vehicles:
The distance between vehicles is increased by pushing the
switch and decreased by pushing the switch. The
distance between vehicles can be set to four levels.
Switching to conventional cruise control function: When the MODE switch is pushed while\. the MR\b\b system is turned on, the system is switched to conventional cruise
control function.
NOTE: The MR\b\b may apply the brakes when encountering
a semi truck (tractor trailer). This is normal. \fimp\.ly push the
accelerator pedal to override the system.
CLOSE PROXIMITY WARNING
While traveling in headway control, if your vehicle rapidly closes in
on a vehicle ahead because the other driver applied his or \.her brakes suddenly, a warning sound activates and the BRAKE! warning is
indicated in the display. Always verify the safety of the surrounding area and depress
the brake pedal while keeping a safe distance from the vehicle ahead. Additionally,
always keep a safe distance from the vehicles behind you.
DISTANCES BETWEEN
VEHICLES
(at 50 mph) DISPLAY
Long
(about 164 ft)
Medium (about 131 ft)
Short
(about 98 ft)
Extremely Short
(about 82 ft)
CANCEL/OFF
Distance
control
(Longer /
Shorter )
MODE (ON)
Cruise
control (SET+ /
RESUME/
SET –)
MRCC SET switch
2940109_18b CX-3 SSG_060817.indd 216/8/17 2:39 PM
Page 24 of 50
22 MAZDAUSA.COM
WARNING:
\f\bB\f is only a
supplementary
system to reduce
damage in the event of a
collision; however, the \f\bB\f has limitations. Do
not rely solely on the \f\bB\f. Always keep your eyes
on the road.
\fMART \bITY BRAKE \fUPPORT
(IF EQUIPPED)
SMART CITY BRAKE SUPPORT (SCBS) SYSTEM
Between speeds of 2 mph and 50 mph\X, the SCBS attempts to
minimize damage if a collision is unavoidable. SCBS will alert the
driver of a possible collision when driv\Xen at speeds of 2 to 50 mph. SCBS may be able to stop the vehicle automatically to avoid a
collision with the \Xvehicle ahead when driven at speeds 2 to 18 mph.
Partial list of operating conditions: • Driver alert during vehicle speeds of 2 to 50 mph.
•
Vehicle automatic brake control during vehicle speeds of
2 to 18 mph.
•
\f\bB\f system has not been turned off.
NOTE: It may be possible to avoid a collision if the relative speed between your vehicle and the vehicle ahead is less than 12 mph.
Refer to your Owner’s Manual for a complete list of \f\bB\f operating
conditions and system details.
SAFETY SETTINGS
SCBS can be turned off using Safety Settings in MAZDA CONNECT (p. 10).
Forward Sensing Camera
2940109_18b CX-3 SSG_060817.indd 226/8/17 2:39 PM
Page 25 of 50
m{zd{ c x-3 23
SMART BRAKE SUPPORT (SBS)
At speeds of 10 mph or higher\X, the SBS alerts the driver of a possible collision and attempts to reduce the severity of an imminent collision with the \Xvehicle ahead. SBS operates when the
vehicle is traveling at speeds hi\Xgher than the range of the SMART CITY BRAKE SUPPORT (SCBS).
Partial list of operating conditions: •
During vehicle speeds of 10 mph or higher\..
•
The \fB\f system has not been turned off.
\fB\f system can be turned off using \fafety \fettings in MAZDA \bONNE\bT (p. 10).
Refer to your Owner’s Manual for a complete list of \fB\f operating
conditions and system details.
COLLISION WARNING
If there is the possibility of a collision with a vehicle ahead, the beep sounds continuously and a warning is indicated in the
multi-information display.
Forward Sensing
Camera
Radar sensor
\fMART BRAKE \fUPPORT
(IF EQUIPPED)
WARNING:
\fB\f is only a
supplementary
system to reduce
damage in
the event of a
collision; however,
the \fB\f has
limitations. Do
not rely solely on
the \fB\f. Always
keep your eyes on
the road.
2940109_18b CX-3 SSG_060817.indd 236/8/17 2:39 PM
Page 42 of 50
40 MAZDAUSA.COM
GLOSSARY OF WARNING AND INDICATOR LIGHTS
Lane Departure Warning System
(LDW\f) On (Amber)/
Lane Detected (Green) (p. 24)
Lane Departure Warning System
(LDW\f) OFF
Traction Control System (T\b\f)/
Dynamic Stability Control (D\f\b)
On: T\b\f/D\f\b malfunction
Flashing: T\b\f/D\f\b operating
Traction Control System (TCS) OFF
SPORT Mode ON
Lights ON (Exterior) (p. 30)
Headlight High Beams ON
Airbag/Front Seat Belt
Pretensioner System Malfunction
Seat Belt Unbuckled/Malfun\Xction
Turn Signals/Hazard Warning
Tire Pressure Monitoring System
(TPM\f) Warning (p. 6)
On/Warning Beep: Low tire pressure in one or more tires
Flashing: TPM\f malf\.unction
Cruise Main ON (Amber)/
Cruise Set ON (Green)
Shift Position
Smart Brake Support (\fB\f) and
Smart City Brake Support (\f\bB\f)
Flashing Red: \fB\f and \f\bB\f
are operating
LED Headlight
High Beam Control ON
Smart Brake Support (\fB\f) and
Smart City Brake Support (\f\bB\f)
Amber: \fB\f and/or \f\bB\f OFF
Check Engine
Security
Brake Warning
Parking brake on/
low brake fluid/malfunction
Master Warning
Low Fuel Level
Low Engine Oil Pressure
Power Steering Malfunction
Automatic Transaxle Warning
Charging System Malfunction
Door/Tailgate Ajar
Low Washer Fluid Level
Advanced Key Detected
Advanced Key Not Detected (p. 4)
Check Fuel Cap
Perform Maintenance
Blind Spot Monitoring
(B\fM) OFF
Mazda Radar Cruise Control
On (Amber) Set (Green
4WD AWD Warning
IN\fTRUMENT \bLU\fTER
Speedometer
Shift
positionOdometer/
trip meter
Fuel gauge
Dashboard
illumination/
dimmer
1/
trip meter2
Information display/
trip computer
2940109_18b CX-3 SSG_060817.indd 406/8/17 2:40 PM
Page 45 of 50
m{zd{ c x-3 43
TRAN\fMI\f\fION
ACTIVE ADAPTIVE SHIFT (AAS) CONTROL
AAS will automatically adjust how and when the transmission shifts gears based on
road conditions and your driving style. The transmission may stay in a lower gear
longer than usual wh\Xen going up or down hills or drivin\Xg around corners. This feature
gives you better control and a more connected driving experience.
ACCELERATOR PEDAL KICKDOWN SWITCH
The accelerator pedal is equippe\Xd with a kickdown switch designed
to allow optimal engine performance while accelerating.
When you depress the accelerator 95% of the way, you will feel an
increase in resistance. Push harder, and you will feel a click as you
activate the kickdown switch. The transmission will usually \.downshift
(depending on engin\.e speed) and the e\.ngine will switch to maximum power
mode. This kickdown switch function is the\. same in both Manual \fhift Mod\.e and in “D”.
HILL LAUNCH ASSIST (HLA)
HLA helps assist you when accelerating the vehicle from a stop while on a hill\X or slope.
When the brake pedal
is released and the
accelerator pedal is
pushed, HLA prevents
the vehicle from rolling
forward or backward. It
operates on a downward
slope when the shi\.ft
lever is in the reverse
(R) position and on an
upward slope when the
shift lever is in a position
other than the reverse (R) position.
IMPORTANT : The HLA system will hold the v\.ehicle for a maximum of two seconds
while the driver is changing from the brake pedal to the accelerator pedal.
2940109_18b CX-3 SSG_060817.indd 436/8/17 2:40 PM