brake sensor MAZDA MODEL CX-3 2018 Smart Start Guide (in English)
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2018, Model line: MODEL CX-3, Model: MAZDA MODEL CX-3 2018Pages: 50, PDF Size: 3.76 MB
Page 22 of 50

20 MAZDAUSA.COM
MAZDA RADAR CRUISE CONTROL (MRCC) SYSTEM
The MRCC system maintains vehicle speed and f\Xollowing distance using a radar sensor
to detect a vehicle ahead. The driver simply presets the vehicle speed between 19 mph
and 90 mph and the\X system will maintain a safe following distance without having to turn the cruise control off.
SETTING THE MRCC:
When the MODE switch is pushed, the
vehicle speed and t\.he distance between
vehicles while in headway control can be
set. The MR\b\b indication is shown in the
Active Driving Display.
NOTE: The radar for the MR\b\b is located
behind the Mazda emblem in the g\.rille.
Keep this area clean to avoid the system
not working properly.
How to set the speed:
1 Adjust the vehicle to the desired speed using the\. accelerator pedal.
2
Push the \fET + or \f\.ET – switch. The set speed and the in\.ter-vehicle distance display
filled with white lines are displayed in the Active Driving Display and the MR\b\b indicator light (green) turns on simultaneously.
MAZDA RADAR \bRUI\fE \bONTROL
(IF EQUIPPED)
OPERATION MODES
MODE DISPLAY
\bonstant \fpeed
Headway \bontrol
MRCC
WARNING:
MR\b\b shuts off
when it reaches the low mph limit.
The vehicle will not brake/stop by itself. \fwitch the
MR\b\b system off
when not in use.
Vehicle ahead
MRCC distance
between vehicles
Active Driving Display
MRCC set
vehicle speed
2940109_18b CX-3 SSG_060817.indd 206/8/17 2:39 PM
Page 25 of 50

m{zd{ c x-3 23
SMART BRAKE SUPPORT (SBS)
At speeds of 10 mph or higher\X, the SBS alerts the driver of a possible collision and attempts to reduce the severity of an imminent collision with the \Xvehicle ahead. SBS operates when the
vehicle is traveling at speeds hi\Xgher than the range of the SMART CITY BRAKE SUPPORT (SCBS).
Partial list of operating conditions: •
During vehicle speeds of 10 mph or higher\..
•
The \fB\f system has not been turned off.
\fB\f system can be turned off using \fafety \fettings in MAZDA \bONNE\bT (p. 10).
Refer to your Owner’s Manual for a complete list of \fB\f operating
conditions and system details.
COLLISION WARNING
If there is the possibility of a collision with a vehicle ahead, the beep sounds continuously and a warning is indicated in the
multi-information display.
Forward Sensing
Camera
Radar sensor
\fMART BRAKE \fUPPORT
(IF EQUIPPED)
WARNING:
\fB\f is only a
supplementary
system to reduce
damage in
the event of a
collision; however,
the \fB\f has
limitations. Do
not rely solely on
the \fB\f. Always
keep your eyes on
the road.
2940109_18b CX-3 SSG_060817.indd 236/8/17 2:39 PM