manual transmission MAZDA MODEL CX-30 2019 Owners Manual (in English)

NOTE
xIf you do not perform the operation
correctly, a sound indicating that the
programming has failed is activated.
xIf the angle of the outer mirrors only
changes a little, the angle of the
outer mirrors may not have been
programmed correctly.
xIf the angle of the outer mirrors is
adjusted close to the limits of its
range of motion, the driving position
can be successfully programmed, but
it may fail when calling up the
programmed driving position.
Calling up the programmed driving
position
CAUTION
Do not place fingers or hands around
the bottom of the seat while the seat
memory function is operating. The seat
moves automatically while the seat
memory function is operating and
fingers or hands could get pinched and
injured.
Using the position memory button
1. Make sure the parking brake is on.
2.(Automatic transmission)
Make sure the selector lever is in
the P position.
3. Switch the ignition ON.
4. Press the programming button for
the driving position you want to call
up (button 1 or 2).
5. A sound is activated when the
adjustment to the programmed
driving position is completed.
NOTE
xWhen adjustment of the driving
position is not necessary, a sound is
not activated.
xThe driving position adjustment is
cancelled in the following cases:
xThe seat adjustment switch on the
driver's seat is operated.
xThe angle of the outer mirrors is
adjusted.
xThe SET button is pressed.xProgramming button 1 or 2 is
pressed.
xThe lock button or unlock button
on the transmitter is pressed.
xThe vehicle starts moving.xThe active driving display is
adjusted.
x(Manual transmission)
The parking brake is released.
x(Automatic transmission)
The selector lever is shifted to a
position other than P.
Using the transmitter
1. Unlock the driver's door using one
of the following methods.
xTouch the sensing area of the
door release touch sensor.
xPress the unlock button on the
transmitter.
2. When you open the driver's door
within 90 seconds after unlocking
the doors, the adjustment of the
following parts starts.
xDriver's seatxActive driving display (When the
ignition is switched ON, the
adjusted active driving display is
activated.)
xOutside mirrors
A sound is activated when the
adjustment is completed.
NOTE
xWhen adjustment of the driving
position is not necessary, a sound is
not activated.
Essential Safety Equipment
Seats
2-11

xThe driving position adjustment is
cancelled in the following cases:
xThe seat adjustment switch on the
driver's seat is operated.
xThe angle of the outer mirrors is
adjusted.
xThe SET button is pressed.xProgramming button 1 or 2 is
pressed.
xThe lock button or unlock button
on the transmitter is pressed.
xThe vehicle starts moving.xThe active driving display is
adjusted.
x(Manual transmission)
The parking brake is released.
x(Automatic transmission)
The selector lever is shifted to a
position other than P.
Erasing programmed driving positions
Erasing the driving positions
programmed to the key
1. Switch the ignition OFF.
2. Press the SET button continuously
until a sound is activated.
3. Press the lock button on the
transmitter within 5 seconds after
the sound is activated.
NOTE
If you do not perform the operation
correctly, a sound indicating that the
programming has failed is activated.
▼Adjusting the Front Passenger's
Seat
1.Seat Slide
To move a seat forward or
backward, raise the lever and slide
the seat to the desired position and
release the lever.
Make sure the lever returns to its
original position and the seat is
locked in place by attempting to
push it forward and backward.
2.Height Adjustment
*
To adjust the seat height, move the
lever up or down.
3.Seat Recline
To change the seatback angle, lean
forward slightly while raising the
lever. Then lean back to the desired
position and release the lever.
Make sure the lever returns to its
original position and the seatback is
locked in place by attempting to
push it forward and backward.

Essential Safety Equipment
Seats
2-12*Some models.

Operation using the transmitter
When the power liftgate button on the
transmitter is pressed and held for
about 1 second or longer with all of
the following conditions met, the
hazard warning lights flash 2 times, a
beep sound is activated, and the
liftgate automatically opens/closes
fully.
xThe ignition is switched OFF.xThe vehicle is stopped.
Refer to Transmitter on page 3-5.
NOTE
xWhen opening the liftgate by
pressing the power liftgate button on
the transmitter, the liftgate can be
opened even when it is locked.
xIf the power liftgate button on the
transmitter is pressed while the
liftgate is opening/closing
electrically, the beep is activated and
the liftgate stops. When pressing the
power liftgate button again, the
liftgate moves in the reverse
direction.
Operation using switch only for
power liftgate
Operation conditions
Opening the liftgate
If the vehicle has satisfied all the
following operation conditions, the
power liftgate can be opened using the
power function.
xAll doors and the liftgate are
unlocked.
xThe vehicle is stopped.x(Manual transmission)
The ignition is switched to a position
other than ON, or when the parking
brake is applied with the shift lever in
N and the ignition switched ON.
x(Automatic transmission)
The ignition is switched to a position
other than ON, or the selector lever
is in P with the ignition switched ON.
Closing the liftgate
xThe vehicle is stopped.x(Manual transmission)
The ignition is switched to a position
other than ON, or when the parking
brake is applied with the shift lever in
N and the ignition switched ON.
x(Automatic transmission)
The ignition is switched to a position
other than ON, or the selector lever
is in P with the ignition switched ON.
NOTE
If the shift lever/selector lever is shifted
to another position and the vehicle is
moved while the liftgate is opening/
closing automatically, the liftgate
operates as follows:
xWhen the liftgate is opening
A beep sound is activated, and the
liftgate moves in the reverse
direction automatically and closes.
xWhen the liftgate is closing
A beep sound is activated, but the
liftgate continues to close.
Operation from the driver's seat (To
open/close)
Press the power liftgate switch for
about 1 second or longer while the
liftgate is in the fully closed/open
position. The hazard warning lights
Before Driving
Doors and Locks
3-24

Maximum trailer towing-load table
Europe/Gradient up to 12%
MODEL TOTAL TRAILER WEIGHTGROSS COMBINA-
TION WEIGHT
Engine TransmissionDrive sys-
temTra i l e r w i t h o u t
brakeTrailer with brake Trailer with brake
SKYACTIV-G
2.0Manual
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,227 kg (7,114.2
lb)
SKYACTIV-G
2.0Automatic
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,257 kg (7,180.3
lb)
SKYACTIV-G
2.0Manual
transmissionAWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,295 kg (7,264.1
lb)
SKYACTIV-G
2.0Automatic
transmissionAWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,321 kg (7,321.4
lb)
SKYACTIV-X
2.0Manual
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,265 kg (7,198.0
lb)
SKYACTIV-X
2.0Automatic
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,265 kg (7,198.0
lb)
SKYACTIV-X
2.0Manual
transmissionAWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,342 kg (7,367.7
lb)
SKYACTIV-X
2.0Automatic
transmissionAWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,370 kg (7,429.5
lb)
SKYACTIV-D
1.8Manual
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,249 kg (7,162.7
lb)
SKYACTIV-D
1.8Automatic
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,269 kg (7,206.8
lb)
SKYACTIV-D
1.8
Manual
t
ransmissionAWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,313 kg (7,303.8
lb)
SKYACTIV-D
1.8Automatic
transmissionAWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,333 kg (7,347.9
lb)
TRAILER NOSE WEIGHT: 80 kg (176.3 lb)
Germany and Austria/Gradient up to 8%
MODEL TOTAL TRAILER WEIGHTGROSS COMBINA-
TION WEIGHT
Engine TransmissionDrive sys-
temTrailer without
brakeTrailer with brake Trailer with brake
SKYACTIV-G
2.0Manual
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,227 kg (7,114.2
lb)
Before Driving
To w i n g
3-62

MODEL TOTAL TRAILER WEIGHTGROSS COMBINA-
TION WEIGHT
Engine TransmissionDrive sys-
temTrailer without
brakeTrailer with brake Trailer with brake
SKYACTIV-G
2.0Automatic
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,257 kg (7,180.3
lb)
SKYACTIV-G
2.0Manual
transmissionAWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,295 kg (7,264.1
lb)
SKYACTIV-G
2.0Automatic
transmissionAWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,321 kg (7,321.4
lb)
SKYACTIV-X
2.0Manual
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,265 kg (7,198.0
lb)
SKYACTIV-X
2.0Automatic
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,265 kg (7,198.0
lb)
SKYACTIV-X
2.0Manual
transmissionAWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,342 kg (7,367.7
lb)
SKYACTIV-X
2.0Automatic
transmissionAWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,370 kg (7,429.5
lb)
SKYACTIV-D
1.8Manual
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,249 kg (7,162.7
lb)
SKYACTIV-D
1.8Automatic
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,269 kg (7,206.8
lb)
SKYACTIV-D
1.8Manual
transmissionAWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,313 kg (7,303.8
lb)
SKYACTIV-D
1.8
Automatic
tr
ansmissionAWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,333 kg (7,347.9
lb)
TRAILER NOSE WEIGHT: 80 kg (176.3 lb)
Russia/Gradient up to 12%
MODEL TOTAL TRAILER WEIGHTGROSS COMBINA-
TION WEIGHT
Engine TransmissionDrive sys-
temTrailer without
brakeTrailer with brake Trailer with brake
SKYACTIV-G
2.0Manual
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,192 kg (7,037.0
lb)
SKYACTIV-G
2.0Automatic
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,240 kg (7,142.9
lb)
SKYACTIV-G
2.0Automatic
transmissionAWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,316 kg (7,310.4
lb)
TRAILER NOSE WEIGHT: 80 kg (176.3 lb)
Before Driving
Towing
3-63

Israel/Gradient up to 12%
MODEL TOTAL TRAILER WEIGHTGROSS COMBINA-
TION WEIGHT
EngineTra n s m i s -
sionDrive sys-
temTrailer without
brakeTrailer with brake Trailer with brake
SKYACTIV-G
2.0Automatic
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,236 kg (7,134.0
lb)
SKYACTIV-G
2.5Automatic
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,239 kg (7,140.6
lb)
SKYACTIV-X
2.0Automatic
transmissionFWD 600 kg (1,322.7 lb)1,300 kg (2,865.9
lb)3,309 kg (7,295.0
lb)
TRAILER NOSE WEIGHT: 80 kg (176.3 lb)
South Africa/Gradient up to 12%
MODEL TOTAL TRAILER WEIGHTGROSS COMBI-
NATION WEIGHT
Engine TransmissionDrive
systemi-stop
systemTrailer without
brakeTrailer with brake Trailer with brake
SKYACTIV-G
2.0Manual
transmissionFWDŠ600 kg (1,322.7
lb)1,200 kg
(2,645.5 lb)3,107 kg
(6,849.6 lb)
SKYACTIV-G
2.0Manual
transmissionFWD ×600 kg (1,322.7
lb)1,200 kg
(2,645.5 lb)3,112 kg
(6,860.7 lb)
SKYACTIV-G
2.0Automatic
transmissionFWD ×600 kg (1,322.7
lb)1,200 kg
(2,645.5 lb)3,137 kg
(6,915.8 lb)
SKYACTIV-G
2.0Automatic
transmissionAWD ×600 kg (1,322.7
lb)1,200 kg
(2,645.5 lb)3,200 kg
(7,054.7 lb)
×: Available
Š: Not available
TRAILER NOSE WEIGHT: 80 kg (176.3 lb)
WARNING
Always keep tow loads within specified limits as indicated in the Trailer
Towing-Load Table:
Attempting to tow loads greater than those
specified is dangerous as it may cause
serious handling and performance problems that could result in personal injury or
vehicle damage, or both.
Before Driving
To w i n g
3-64

recommend an Authorised Mazda
Repairer).
xMake sure the trailer cargo is secure
to prevent it from shifting.
xMake sure the mirrors meet all
government regulations. Inspect
them.
xBefore starting out, inspect the
operation of all vehicle and trailer
lights and all vehicle-to-trailer
connections. Stop and re-inspect all
lights and connections after driving a
short distance.
Driving
xYour Mazda will handle differently
with a trailer in tow, so practice
turning , backing , and stopping in a
traffic-free area.
xTake time to get accustomed to the
extra weight and length.
xDo not exceed 100 km/h (62 mph)
with a trailer in tow. If the local legal
maximum speed with a trailer in tow
is less than 100 km/h (62 mph), do
not exceed the legal speed.
CAUTION
If the vehicle exceeds 100 km/h (62
mph) with a trailer in tow, the
vehicle could be damaged.
xWhen ascending a hill, shift into a
lower gear to reduce the possibility
of overloading or overheating the
engine, or both.
xWhen descending a hill, shift into a
lower gear and use engine
compression as a braking effect. Pay
constant attention to speed and use
the brakes only as needed. Holding
the brake pedal down for a
prolonged period may cause the
brakes to overheat and lose power.
Parking
Avoid parking on an incline with a
trailer. If this must be done, follow
these instructions.
Parking on an Incline
1. Set the parking brake and the
brakes.
2. Have someone block the wheels of
the vehicle and trailer while you
apply the brakes.
3. After the wheels are blocked,
release the parking brake and the
brakes slowly, allowing the blocks
to bear the load.
4. Set the parking brake firmly.
5. If the vehicle has an automatic
transmission, put the selector lever
in P position. If it has a manual
transmission, place the gear shift in
1 or R position.
Starting on an Incline
1. Start the engine (page 4-5).
2. Release the parking brake and
slowly pull away a short distance
from the wheel blocks.
3. Stop on the nearest level ground,
set the parking brake, and pick up
the wheel blocks.
Before Driving
Towing
3-67

4When Driving
Information concerning safe driving and stopping.
Start/Stop Engine..................... 4-4
Ignition Switch.......................4-4
Starting the Engine................. 4-5
Turning the Engine
Off.......... 4-10
i-stop
*................................. 4-11
Cylinder Deactivation
*..........4-20
Instrument Cluster and
Display.................................. 4-21
Instrument Cluster and
Display................................4-21
Instrument Cluster............... 4-21
Active Driving Display.......... 4-39
Manual Transmission
Operation.............................. 4-41
Manual Transmission Shift
Pattern................................ 4-41
Automatic Transmission........... 4-43
Automatic Transmission
Controls.............................. 4-43
Shift-Lock System................. 4-44
Transmission Ranges............ 4-45
Manual Shift Mode.............. 4-46
Direct Mode
*.......................4-52
Driving Tips......................... 4-53
Switches and Controls............. 4-54
Lighting Control................... 4-54
Rear Fog Light
*..................... 4-59
Turn and Lane-Change
Signals................................ 4-60
Windscreen Wipers and
Washer............................... 4-61
Rear Window Wiper and
Washer............................... 4-64
Headlight Washer
*............... 4-65
Rear Window Defogger........ 4-66
Horn................................... 4-67
Hazard Warning Flasher....... 4-68
Brake.....................................4-69
Brake System....................... 4-69
AUTOHOLD........................ 4-74
Emergency Stop Signal
System................................ 4-78
Hill Launch Assist (HLA)........4-79
ABS/TCS/DSC/Off-Road
Traction Assist.........................4-80
Antilock Brake System
(ABS).................................. 4-80
Traction Control System
(TCS).................................. 4-81
Dynamic Stability Control
(DSC)................................. 4-83
Off-Road Traction Assist
*...... 4-84
M Hybrid............................... 4-86
M Hybrid............................ 4-86
*Some models.4-1

Ignition Switch
▼Push Button Start Positions
The system operates only when the key
is within operational range.
Each time the push button start is
pressed, the ignition switches in the
order of
off, ACC, and ON. Pressing
the push button start again from ON
switches the ignition
off.
1. Indicator light
2. Push button start
NOTE
xThe engine starts by pressing the
push button start while depressing
the clutch pedal (manual
transmission) or the brake pedal
(automatic transmission). To switch
the ignition position, press the push
button start without depressing the
pedal.
xDo not leave the ignition switched
ON while the engine is not running.
Doing so could result in the battery
going dead. If the ignition is left in
ACC (For automatic transmission,
the selector lever is in the P position,
and the ignition is in ACC), the
ignition switches off automatically
after about 25 minutes.
Off
The power supply to electrical devices
turns off and the indicator light
(amber) also turns off.
In this position the steering wheel is
locked.
WARNING
Before leaving the driver's seat,
always switch the ignition off, set the
parking brake, and make sure the
selector lever is in P (automatic
transmission) position or in 1st gear
or R (manual transmission):
Leaving the driver's seat without
switching the ignition off, setting the
parking brake, and shifting the selector
lever to P (automatic transmission)
position or to 1st gear or R (manual
transmission) is dangerous.
Unexpected vehicle movement could
occur which could result in an
accident.
In addition, if your intention is to leave
the vehicle for even a short period, it is
important to switch the ignition
off, as
leaving it in another position will
disable some of the vehicle's security
systems and run the battery down.
NOTE
(Locked steering wheel)
If the push button start indicator light
(green) is
flashing , a message is
displayed on the multi-information,
and the beep sound is heard, this
indicates that the steering wheel is not
unlocked. To unlock the steering
wheel, press the push button start
while moving the steering wheel left
and right.
When Driving
Start/Stop Engine
4-4

This is for improved exhaust gas
purification and does not indicate
any parts defect.
1. Make sure you are carrying the key.
2. Occupants should fasten their seat
belts.
3. Make sure the parking brake is on.
4. Continue to depress the brake
pedal firmly until the engine has
completely started.
5.(Manual transmission)
Continue to depress the clutch
pedal firmly until the engine has
completely started.
(Automatic transmission)
Put the vehicle in park (P). If you
must restart the engine while the
vehicle is moving, shift into neutral
(N).
NOTE
x(Manual transmission)
The starter will not operate if the
clutch pedal is not depressed
sufficiently.
x(Automatic transmission)
The starter will not operate if the
selector lever is not in P or N
position and the brake pedal is
not depressed sufficiently.
6. Make sure that the push button
start indicator light (green) turns
on.
1. Indicator light
2. Push button start
NOTE
xIf the push button start indicator
light (green) flashes, make sure
that the key is being carried.
xIf the push button start indicator
light (green)
flashes with the key
being carried, touch the key to
the push button start and start
the engine.
Refer to Engine Start Function
When Key Battery is Dead on
page 4-8.
CAUTION
If the KEY warning indication (red)
is displayed, or the push button
start indicator light (amber)
flashes,
this could indicate a problem with
the engine starting system. This may
prevent the engine from starting or
from switching the ignition to ACC
or ON.
Refer to KEY Warning Indication/
Warning Light (Red) on page
7-56.
Have your vehicle inspected at an
expert repairer (we recommend an
Authorised Mazda Repairer) as
soon as possible.
NOTE
xUnder the following conditions,
the KEY warning indication (red)
is displayed after the push button
start is pressed. This informs the
driver that the push button start
will not switch to ACC, even if it
is pressed from off (page 7-56).
xThe key battery is dead.xThe key is out of operational
range.
xThe key is placed in areas where
it is difficult for the system to
detect the signal (page 3-7).
When Driving
Start/Stop Engine
4-6