MAZDA MODEL CX-5 2013 Quick Guide (in English)
Manufacturer: MAZDA, Model Year: 2013, Model line: MODEL CX-5, Model: MAZDA MODEL CX-5 2013Pages: 16, PDF Size: 0.3 MB
Page 11 of 16
When Driving
10
i-ACTIVSENSE
Your vehicle is equipped with a variety of safety and driver support systems called
i-ACTIVSENSE
For details, refer to Section 4, “Switches and Controls”.
In addition, a Forward Sensing Camera (FSC) and Laser sensors are installed to
operate the systems.
Your vehicle is equipped with a Forward Sensing Camera (FSC). The Forward
Sensing Camera (FSC) is positioned near the rearview mirror and used by the
following systems. Safety and Driver Support Systems
• Smart City Brake Support (SCBS)
• Rear Vehicle Monitoring (RVM) System
• Lane Departure Warning System (LDWS)
• High Beam Control System (HBC)
Forward Sensing Camera
• High Beam Control System (HBC)
• Lane Departure Warning System (LDWS)
Always keep the windscreen glass around the camera clean by removing dirt or
fogging. Use the windscreen defroster to remove fogging on the windscreen.
• Adaptive Front Lighting System (AFS)
% : A ' , ' ' & A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 12 of 16
When Driving
11
Smart City Brake Support (SCBS)
The Smart City Brake Support (SCBS) system is designed to reduce damage in the
event of a collision by operating the brake control (SCBS brake) when the
system's laser sensor detects a vehicle ahead and determines that a collision with
the vehicle ahead is unavoidable.
For details, refer to Section 4, “Smart City Brake Support (SCBS)”.
It may also be possible to avoid a collision if the relative speed between your
vehicle and the vehicle ahead is less than about 15 km/h (9.3 mph).
Do not rely completely on the Smart City Brake Support (SCBS) system:
The Smart City Brake Support (SCBS) is a system which operates in response to a
vehicle ahead. It does not apply to 2-wheeled vehicles or pedestrians.
If the vehicle height or inclination is changed, the system will not be able to
correctly detect vehicles ahead resulting in the Smart City Brake Support
(SCBS) system not operating normally or mistakenly operating, which
could cause a serious accident.
WARNING
Do not modify the suspension:
NOTE
The Smart City Brake Support (SCBS) detects a vehicle ahead by emitting a
near-infrared laser beam and receiving the beam reflected off the reflector of the
vehicle ahead, and then using it for the measurement. Consequently, the Smart
City Brake Support (SCBS) may not operate under the following conditions:
• Trucks with low loading platforms and vehicles with an extremely low or
high profile.
• Under bad weather condition, such as rain, fog and snow.
• The window washer is being used or the windscreen wipers are not used when
its raining.
• The windscreen is dirty.
• The steering wheel is turned completely left or right, or the vehicle is acceler-
ated rapidly and comes close to the vehicle ahead.
Other details are described in the related text.
% : A ' , ' ' & A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 13 of 16
When Driving
12
X Mark Full Low
For details, refer to Section 4, “Switches and Controls”, “ABS/TCS/DSC” or “Tyre Pressure
Monitoring System”.
Tyre Pressure Monitoring System
The Tyre Pressure Monitoring System (TPMS) monitors the air pressure of all
four tyres. If the air pressure of one or more tyres is too low, the system warns the
driver by indicating the tyre pressure monitoring system warning light in the
instrument cluster and operating a beep sound.
In the following cases, system initialization must be performed so that the system
operates normally.
• A tyre pressure is adjusted.
• Tyre rotation is performed.
• A tyre or wheel is replaced.
• The battery is replaced or completely drained.
• The tyre pressure monitoring system warning
light is illuminated.
Diesel Particulate Filter
The diesel particulate filter collects and removes most of the particulate matter
(PM) in the exhaust gas of a diesel engine.
Inspect the engine oil level periodically. When inspecting the engine oil, if the
engine oil level is close to or exceeds the “X” mark on the dipstick, replace the
engine oil.
Whenever the engine oil is replaced, the vehicles engine control unit needs to be
reset according to the instruction in Workshop Manual as soon as possible.
Otherwise the engine oil warning light may illuminate. Consult an expert repairer
to reset the engine control unit, we recommend an Authorised Mazda Repairer.
% : A ' , ' ' & A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 14 of 16
Interior Features
13
Airflow display
Temperature setting display (driver)
Mode selector display A/CTemperature setting display (passenger)
Air intake selector
(recirculated air
position)
Air intake selector
(outside air position)
Driver temperature control dialAUTO switch
Mode selector switchFan control dialOFF switch Windscreen defroster switch
Rear window defogger switchPassenger temperature control dialDUAL switchA/C switch
Air-Conditioning System (Fully Automatic Type)
Operation of Automatic Air Conditioning
1. Press the AUTO switch. Selection of the airflow mode, air intake selector and
amount of airflow will be automatically controlled.
2. Use the temperature control dial to select a desired temperature.
3. To turn off the system, press the OFF switch.
Press the DUAL switch or turn the front passenger temperature control dial to
control the set temperature individually for the driver and front passenger.
For details, refer to Section 5, “Air-Conditioning System”.
% : A ' , ' ' & A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 15 of 16
Maintenance and Care
14
SKYACTIV-G 2.0 and SKYACTIV-G 2.5
SKYACTIV-D 2.2 Windscreen washer fluid reservoir
Engine oil-filler capBrake/Clutch fluid reservoir
BatteryFuse block
Engine oil dipstickEngine coolant reservoir Cooling system cap
Windscreen washer fluid reservoir
Engine oil-filler capBrake/Clutch fluid reservoir
BatteryFuse block
Engine oil dipstick Cooling system cap Engine coolant reservoir
Owner Maintenance Precautions
Routine Service
We highly recommend that these items be inspected daily, or at least every week.
• Engine Oil Level
• Engine Coolant Level
• Brake and Clutch Fluid Level
• Washer Fluid Level
• Battery Maintenance
• Tyre Inflation Pressure
For details, refer to Section 6, “Owner Maintenance”.
% : A ' , ' ' & A ' F K V K Q P A 3 W K E M ) W K F G K P F D
Page 16 of 16
If Trouble Arises
15
If Trouble Arises
• Flat Tyre
If you have a flat tyre, drive slowly to a level spot that is well off the road and
out of the way of traffic to change the tyre.
In the event of a flat tyre, use the emergency flat tyre repair kit to repair the tyre
temporarily or use the temporary spare tyre.
• Overheating
1. Drive safely to the side of the road and park off the right-of-way.
2. Check whether coolant or steam is escaping from the engine compartment.
If steam is coming from the engine compartment:
Do not go near the front of the vehicle. Stop the engine.
Wait until the steam dissipates, then open the bonnet and start the engine.
If neither coolant nor steam is escaping:
Open the bonnet and idle the engine until it cools.
• Towing Description
We recommend that towing be done only by an expert repairer, we recommend
an Authorised Mazda Repairer or a commercial tow-truck service.
• Warning Lights and Warning Sounds
If a warning light illuminates or flashes or a warning sound is heard, check for
details concerning the warning light or sound in this guide. If the problem
cannot be resolved, contact an Authorised Mazda Repairer.
For details, refer to Section 7, “Flat Tyre”, “Overheating”, “Emergency Towing” or
“Warning/Indicator Lights and Warning Sounds”.
% : A ' , ' ' & A ' F K V K Q P A 3 W K E M ) W K F G K P F D