warning light MAZDA MODEL CX-5 2017 - RHD (UK, Australia) (in English) Owner's Guide

Selector lever is operated while engine idling is stopped (automatic transaxle)
If the selector lever is shifted from D or M (not in second gear fixed mode) position to N or
P position while engine idling is stopped, the engine does not restart even when the brake
pedal is released. The engine will restart if the brake pedal is depressed again or the
selector lever is shifted to the D, M (not in second gear fixed mode), or R position. (For the
purposes of safety, always keep the brake pedal depressed when shifting the selector lever
while engine idling is stopped.)
If the selector lever is shifted from the D or M (not in second gear fixed mode) to the N or P
position, and the driver's seat belt is unfastened and the driver's door is opened, the engine
restarts.
Battery terminals are disconnected
Engine idling may not stop right after the batte ry terminals are disconnected. In addition, if
the battery is replaced, the i-stop functions must be verified. Consult an expert repairer, we
recommend an Authorised Mazda Repairer.
▼ i-stop OFF Switch
By pressing the swit
ch until a beep
sounds, the i-stop function is turned off
and the i-stop warning light (amber) in the
instrument cluster turns on. By pressing
the switch again until the beep sounds, the
i-stop function becomes operational and
the i-stop warning light (amber) turns off.
NOTE
If the engine is stopped with the i-stop
function cancelled, the i-stop function
becomes operational when the engine is
started the next time.
When Driving
Start/Stop Engine
4-17
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Note that the vehicle may move suddenly af ter the vehicle roll prevention function is
released while the vehicle is un der the following conditions:
 The selector lever is in the N position.
 If the selector lever is shifted to the N position and the brake pedal is released while the
i-stop function is operating, the brake force is gradually released. To accelerate the
vehicle, release the brake pedal after the engi ne restarts and shift the selector lever to a
position other than the N position.
NOTE
•When the vehicle is stopped on a steep grade, the vehicle roll prevention function does not
operate because engine idling is not stopped.
•The brake pedal response may change, sound may occur from the brakes, or the brake
pedal could vibrate from the operation of the vehicle roll prevention function. However,
this does not indicate a malfunction.
▼ i-stop Warning Light (Amber)/i
-stop Indicator Light (Green)
To ensure safe and comfortable use of the vehicle, the i-stop s ystem constantly monitors the
driver's operations, the vehicle's interior and exterior enviro nment, and the operational status
of the vehicle, and uses the i-stop warning light (amber) and i -stop indicator light (green) to
inform the driver o f various cautions and warnings.
NOTE
On vehicles equipped with the centre display, the i-stop operation status is displayed in the
fuel monitor contro l status display.
Refer to Control Status Display on page 4-97.
i-stop warning light (amber)
When the light is turned on
•The light turns on when the ignition is switched ON and turns o ff when the engine is
started.
•The light turns on when the i-stop OFF switch is pressed and th e system is turned off.
•(European model)
The light turns on if the following operations are performed wh ile engine idling is
stopped. In such cases, the engine does not restart automatical ly to ensure safety. Start the
engine using the normal method.
•The bonnet is opened.
•The driver's seat belt is unfastened and the driver's door is o pened.
When Driving
Start/Stop Engine
4-19
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

(European model)
(Except European model)
NOTE
•Even though the distance-to-empty
display may indicate a sufficient amount
of remaining driving distance before
refuelling is required, refuel as soon as
possible if the fuel level is very low or
the low fuel warning light illuminates.
•The display may not change unless you
add more than approximately 9 L (2.3
US gal, 1.9 Imp gal) of fuel.
•The distance-to-empty is the
approximate remaining distance the
vehicle can be driven until all the
graduation marks in the fuel gauge
(indicating the remaining fuel supply)
disappear.
•If there is no past fuel economy
information such as after first
purchasing your vehicle or the
information is dele ted when the battery
leads are disconnected, the actual
distance-to empty/range may differ from
the amount indicated.
Average fuel economy mode
This mode displays the average fuel
economy by calculating the total fuel
consumption and the total travelled
distance since purch asing the vehicle,
re-connecting the battery after
disconnection, or resetting the data. The
average fuel economy is calculated and
displayed every minute.
(European model)
(Except European model)
Type A
Type B
To clear the data being displayed, press the
INFO switch for more than 1.5 seconds.
After pressing the INFO switch, - - -
L/100 km (- - - mpg) or - - - km/L will be
displayed for about 1 minute before the
fuel economy is recalculated and
displayed.
Current fuel economy mode
This mode displays the current fuel
economy by calculating the amount of fuel
consumption and the distance travelled.

Current fuel economy will be calculated
and displayed every 2 seconds.
When Driving
Instrument Cluster and Display
4-29
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

CAUTION
If the high engine coolant temperature
warning light (red) turns on, there is a
possibility of overheating. Park the vehicle
in a safe place immediately and take
appropriate measures. If the vehicle
continues to be driven, it could cause
damage to the engine.
Refer to Overheating on page 7-37.
NOTE
•The temperature unit (Centigrade/
Fahrenheit) of the engine coolant gauge
display changes in conjunction with the
temperature unit of the outside
temperature display.
Refer to Personalisation Features on
page 9-12.
•During normal driving, the engine
coolant temperature stabilizes at 100 °C
(210 °F) or less, and the gauge indicates
a range lower than 100 °C (210 °F).
▼Fuel Gauge
The fuel gauge shows approximately how
much fuel is remaining in the tank when
the ignition is switched ON. We
recommend keeping the tank over 1/4 full.

Full
1/4 Full
Empty
If the fuel level is low, () and () turn an
amber colour. Refuel as soon as possible.
Refer to Taking Action on page 7-53 .
NOTE
•After refuelling, it may require some
time for the indicato r to stabilize. In
addition, the indicator may deviate
while driving on a slope or curve since
the fuel moves in the tank.
•The display indicating a quarter or less
remaining fuel has more segments to
show the remaining fu el level in greater
detail.
•The direction of the arrow () indicates
that the fuel-filler flap is on the left side
of the vehicle.
When Driving
Instrument Cluster and Display
4-34
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

(SKYACTIV-D 2.2)
If inconsistency in engine performance or
stalling occurs due to low fuel level
conditions, refuel the vehicle as soon as
possible and add at least 10 L (2.7 US gal,
2.2 Imp gal) of fuel.
▼ Outside Temperature Display
When the ignition is switched ON, the
outside temperatur
e is displayed.

NOTE
•Under the following conditions, the
outside temperature display may differ
from the actual outside temperature
depending on the surroundings and
vehicle conditions:
•Significantly cold or hot temperatures.
•Sudden changes in outside
temperature.
•The vehicle is parked.
•The vehicle is driven at low speeds.
Changing the Temperature Unit of the
Outside Temperature Display (Vehicles
with Type B audio)
The outside temperature unit can be
switched between Celsius and Fahrenheit.
Settings can be changed by operating the
centre display screen.
Refer to Personalisation Features on page
9-12.
NOTE
When the temperature unit indicated in the
outside temperature display is changed,
the temperature unit indicated in the
engine coolant gauge display changes in
conjunction with it.
Outside Temperature Warning*
When the outside temperature is low, the
indication flashes and a beep sound is
heard to warn the driv er of the possibility
of icy roads.
If the outside temperature is lower than
about 4 °C (39 °F), the outside
temperature display and the
mark
flashes for about ten seconds and a beep
sound is heard once.
NOTE
If the outside temperature is lower
than -20 °C (-4 °F), the beep sound does
not operate. However, the
mark
illuminates.
▼ Distance-to-empty
This displays the approximate distance
you can travel on the remaining fuel based
on the fuel economy.
The distance-to-empty will be calculated
and displayed every second.

NOTE
•Even though the distance-to-empty
display may indicate a sufficient amount
of remaining driving distance before
refuelling is required, refuel as soon as
possible if the fuel level is very low or
the low fuel warning light illuminates.
•The display will not change unless you
add more than approximately 9 L (2.3
US gal, 1.9 Imp gal) of fuel.
When Driving
Instrument Cluster and Display
*Some models.4-35
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

▼Lane-keep Assist System (LAS) &
Lane Departure Warning System
(LDWS) Display
*
Displays the system status.

Refer to Lane-keep A
ssist System (LAS)
& Lane Departure Warning System
(LDWS) on page 4-163.
▼ Cruise Control Set Vehicle Speed
Display*
The vehicle speed preset using the cruise
control is displayed.

Refer to Cruise Con
trol on page 4-207.
▼Adjustable Speed Limiter (ASL)
Display*
The setting status of the Adjustable Speed
Limiter (ASL) is displayed.

Refer to Adjustable
Speed Limiter (ASL)
on page 4-174.
▼ Vehicle Speed Alarm*
In this mode, the curr
ent setting for the
vehicle speed alarm is displayed. You can
change the vehicle speed setting at which
the warning is triggered.
NOTE
The vehicle speed alarm display is
activated at the same time the beep sound
is heard. The set vehicle speed flashes
several times.
The vehicle speed alarm can be set using
the centre display.
NOTE
•Always set the vehicle speed according
to the laws and regulations of the
country/city in which the vehicle is
driven. In addition, always verify the
speed of the vehicle using the
speedometer.
•The vehicle speed alarm function can be
set between 30 and 250 km/h (20 and
150 mph).
▼ Warning (Display Indication)
A message is displayed to notify the user
of the system operation status and
malfunctions or abnormalities.
If the warning light
turns on/flashes
simultaneously or a symbol is indicated in
the display, check the information
regarding the warning light or symbol.
(page 4-42)
When only a message is displayed, refer to
Message Indicated i n Multi-information
Display. (page 7-59)
When Driving
Instrument Cluster and Display
4-38*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Do not place beverages near the active driving display. If water or other liquids are splashed
on the active driving display, it could cause damage.
 Do not place objects above the active driving display or apply stickers to the dust-proof
sheet/optical receiver as they will cause interference.
 A sensor is integrated to control the display's luminosity. If the optical receiver is covered,
the display's luminosity will lower ma king the display difficult to view.
 Do not allow intense light to hit the optical receiver. Otherwise, it could cause damage.
NOTE
•Wearing polarized sunglasses will reduce the visi bility of the active driving display due to
the characteristics of the display.
•If the battery has been removed and re-installed or the battery voltage is low, the adjusted
position may deviate.
•The display may be difficult to view or temporarily affected by weather conditions such as
rain, snow, light, and temperature.
•If the audio system is removed, the active driving display cannot be operated.
The active driving display indica tes the following information:
•Blind Spot Monitoring (BSM) Operation Conditions and Warnings
Refer to Blind Spot Monitoring (BSM) on page 4-115.
•Distance Recognition Support System (DRSS) Warnings
Refer to Distance Recognition Support System (DRSS) on page 4-1 27.
•Traffic Sign Recognition System (TSR) traffic signs and Warnings
Refer to Traffic Sign Recognition System (TSR) on page 4-120.
•Mazda Radar Cruise Control with S top & Go function (MRCC with Stop & Go function)
Operation Conditions and Warnings
Refer to Mazda Radar Cruise Con trol with Stop & Go function (MR CC with Stop & Go
function) on page 4-149.
•Mazda Radar Cruise Control (MRCC) Operation Conditions and Warn ings
Refer to Mazda Radar Cruise C ontrol (MRCC) on page 4-137.
•Lane-keep Assist System (LAS) & Lane Departure Warning System ( LDWS) Operation
Conditions and Warnings
Refer to Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) on
page 4-163.
•Smart Brake Support (SBS) Operation Conditions and Warnings
Refer to Smart Brake Support (SBS) on page 4-193.
•Adjustable Speed Limiter (ASL) Operation Conditions and Warning s
Refer to Adjustable Speed Li miter (ASL) on page 4-174.
When Driving
Instrument Cluster and Display
4-40
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

Warning/Indicator Lights
Instrument Cluster varies depending on model and specifications.
Centre of Instrument panel
Warning/Indicator lights will appear in any of the highlighted areas
Type A
(With Multi-information Display)
(Without Multi-information Display)
Instrument Cluster
Type B
▼ Warning Indication/Warning Lights
These lights turn on or flash to notify the user of the system
operation status or a system
malfunction.
Signal Warning Page
Brake System Warning Light*17-43
When Driving
Instrument Cluster and Display
4-42
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalWarning Page
ABS Warning Light*1
Electronic Brake
Force Distribu- tion System
Wa r n i n g 7-43
ABS warning 7-46
Charging System Warning Indication/Warning Light*17-43
Engine Oil Warning Light*17-43
(Red) High Engine Coolant Temperature
Warning Indication/Warning Light
*17-43
Power Steering Malfunction Indication/Malfunction Indicator Light*17-43
Master Warning Indication/Warning Light*17-46
Electric Parking Brake (EPB) Warning Indication/Warning Light*17-46
(Red)
*Brake Pedal Operation Demand Warning Light*1
Flashing
4-84
Buzzer & Flash- ing
7-46
Check Engine Light*17-46
*Automatic Transaxle Warning Indication/Warning Light*17-46
*4WD Warning Indication/Warning Light*17-46
Air Bag/Seat Belt Pretensioner System Warning Light*17-46
*Tyre Pressure Monitoring System Warning Light*1
Flashing
7-46
Turns on 7-53
(Amber/White)
*KEY Warning Indication Amber
7-46
White 7-53
When Driving
Instrument Cluster and Display
*Some models.4-43
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2

SignalWarning Page
(Red)
*KEY Warning Light*1
Turns on
7-46
Flashing 7-53
(Amber)
*i-stop Warning Light*17-46
(Amber)*i-ELOOP Warning Indication 7-46
(Amber)
*High Beam Control System (HBC) W
arning Indication/Warning Light*17-46
*Adaptive LED Headlights (ALH) Warning Indication/Warning Light*17-46
*Blind Spot Monitoring (BSM) Warning Indication 7-46
(Amber)
*Driver Attention Alert (D
AA) Warning Indication 7-46
(Amber)
*Mazda Radar Cruise Control (MRCC) Warning
Indication7-46
*Mazda Radar Cruise Control with Stop & Go func
tion (MRCC with Stop
& Go function) Warning Indication 7-46
(Amber)
*Lane-keep Assist System (LAS) &
Lane Departure Warning System
(LDWS) Warning Indication 7-46
LED Headlight Warning Light*17-46
(Amber)
*Smart Brake Support/Sma
rt City Brake Support (SBS/SCBS) Warning In-
dication/Warning Light*17-53
Low Fuel Warning Indication/Warning Light 7-53
*120 km/h Warning Light*17-53
Seat Belt Warning Light (Front seat) 7-53
(Red)*Seat Belt Warning Light (Rear seat)7-53
*Low Washer Fluid Level Warning Indication/Warning Light
7-53
When Driving
Instrument Cluster and Display
4-44*Some models.
2017-6-7 7:51:19 Form No. CX-5 8FY4-EE-17E+L_Edition2