warning light MAZDA MODEL CX-5 2017 (in English) Workshop Manual
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2017, Model line: MODEL CX-5, Model: MAZDA MODEL CX-5 2017Pages: 664, PDF Size: 11.73 MB
Page 168 of 664
4–24
When Driving
Instrument Cluster and Display
Outside Temperature Display
When the ignition is switched ON, the
outside temperature is displayed.
NOTE
Under the following conditions, the
outside temperature display may differ
from the actual outside temperature
depending on the surroundings and vehicle
conditions:
Signifi cantly cold or hot temperatures. Sudden changes in outside temperature. The vehicle is parked. The vehicle is driven at low speeds.
Changing the Temperature Unit of the
Outside Temperature Display
The outside temperature unit can be
switched between Celsius and Fahrenheit.
Settings can be changed by operating the
center display screen.
Refer to Personalization Features on page
9-11 .
NOTE
When the temperature unit indicated in the
outside temperature display is changed,
the temperature unit indicated in the
engine coolant gauge display changes in
conjunction with it.
Distance-to-empty
This displays the approximate distance
you can travel on the remaining fuel based
on the fuel economy.
The distance-to-empty will be calculated
and displayed every second.
NOTE
Even though the distance-to-empty
display may indicate a suf fi cient amount
of remaining driving distance before
refueling is required, refuel as soon as
possible if the fuel level is very low or
the low fuel warning light illuminates.
The display will not change unless you
add more than approximately 9 L
(2.3 US gal, 1.9 Imp gal) of fuel.
The distance-to-empty is the
approximate remaining distance the
vehicle can be driven until all the
graduation marks in the fuel gauge
indicating the remaining fuel supply
disappear.
If there is no past fuel economy
information such as after fi rst
purchasing your vehicle or the
information is deleted when the battery
cables are disconnected, the actual
distance-to empty/range may differ from
the amount indicated.
CX-5_8FN1-EA-16L_Edition1.indb 242016/12/12 10:05:45
Page 171 of 664
4–27
When Driving
Instrument Cluster and Display
*Some models.
Lane-keep Assist System (LAS) & Lane Departure Warning System
(LDWS) Display
*
Displays the system status.
Refer to Lane-keep Assist System (LAS)
& Lane Departure Warning System
(LDWS) on page 4-135 .
Cruise Control Set Vehicle Speed
Display *
The vehicle speed preset using the cruise
control is displayed.
Refer to Cruise Control on page 4-168 .
Compass Display
The direction the vehicle is moving is
displayed while the vehicle is being
driven.
Display Direction
N North
S South
E East
W West
Warning (Display Indication)
A message is displayed to notify the user of the system operation status \
and malfunctions or
abnormalities.
If the warning light turns on/ fl ashes simultaneously or a symbol is indicated in the display,
check the information regarding the warning light or symbol. (page 4-32 )
When only a message is displayed, refer to Message Indicated in Multi-in\
formation Display.
(page 7-35 )
CX-5_8FN1-EA-16L_Edition1.indb 272016/12/12 10:05:46
Page 176 of 664
4–32
When Driving
Instrument Cluster and Display
Warning/Indicator Lights
Instrument Cluster varies depending on model and specifi cations.
Center of Dashboard Warning/Indicator lights will appear in any of the highlighted areas
Type A
(With Multi-information Display)
(Without Multi-information Display)
Instrument Cluster
Type B
CX-5_8FN1-EA-16L_Edition1.indb 322016/12/12 10:05:47
Page 177 of 664
4–33
When Driving
Instrument Cluster and Display
*Some models.
Warning Indication/Warning Lights
These lights turn on or fl ash to notify the user of the system operation status or a system
malfunction.
Signal Warning Page
Brake System Warning Indication/Warning Light *1*2
7-23
ABS Warning Light *1 Electronic
Brake Force Distribution
System Warning 7-23
ABS warning 7-26
Charging System Warning Indication/Warning Light *1
7-23
Engine Oil Warning Light *1
7-23
(Red) * High Engine Coolant Temperature Warning Indication/Warning Light *1
7-23
* Power Steering Malfunction Indication/Malfunction Indicator Light *1
7-23
* Master Warning Indication/Warning Light *1
7-26
Electric Parking Brake (EPB) Warning Indication/Warning Light *1
7-26
(Red) * Brake Pedal Operation Demand Warning Light *1 Flashing
4-75
Buzzer & Flashing 7-26
Check Engine Light *1
7-26
* Automatic Transaxle Warning Indication/Warning Light *1
7-26
* AWD Warning Indication/Warning Light *1
7-26
Air Bag/Front Seat Belt Pretensioner System Warning Light *1
7-26
CX-5_8FN1-EA-16L_Edition1.indb 332016/12/12 10:05:47
Page 178 of 664
4–34
When Driving
Instrument Cluster and Display
*Some models.
Signal Warning Page
* Tire Pressure Monitoring System Warning Light *1 Flashing
7-26
Turns on 7-31
(Amber/White) * KEY Warning Indication Amber
7-26
White 7-31
(Red) * KEY Warning Light *1 Malfunction
7-26
Except
malfunction 7-31
(Amber) * High Beam Control System (HBC) Warning Indication/Warning Light *1
7-26
* Blind Spot Monitoring (BSM) Warning Indication
7-26
(Amber) * Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop &
Go function) Warning Indication 7-26
(Amber) * Lane-keep Assist System (LAS) & Lane Departure Warning System
(LDWS) Warning Indication 7-26
LED Headlight Warning Light *1
7-26
(Amber)
* Smart Brake Support/Smart City Brake Support (SBS/SCBS) Warning
Indication/Warning Light *1 7-31
Low Fuel Warning Indication/Warning Light
7-31
Check Fuel Cap Warning Indication/Warning Light *1
7-31
Seat Belt Warning Light
7-31
* Low Washer Fluid Level Warning Indication/Warning Light
7-31
CX-5_8FN1-EA-16L_Edition1.indb 342016/12/12 10:05:48
Page 179 of 664
4–35
When Driving
Instrument Cluster and Display
*Some models.
Signal Warning Page
* Door-Ajar Warning Indication
7-31
* Liftgate-Ajar Warning Indication
7-31
* Door-Ajar Warning Light
7-31
*1 The light turns on when the ignition is switched on for an operation che\
ck, and turns off a few seconds later or when the engine is started. If the light does not turn on or remains tur\
ned on, have the vehicle inspected at an
Authorized Mazda Dealer.
*2 The light turns on continuously when the electric parking brake (EPB) \
is applied.
Indication/Indicator Lights
These lights turn on or fl ash to notify the user of the system operation status or a system
malfunction.
Signal Indicator Page
* Front Passenger Air Bag Deactivation Indicator Light *1
2-61
(Green) * KEY Indicator Light
4-5
Security Indicator Light *1
3-46
* Wrench Indication/Indicator Light *1
4-38
(Blue) * Low Engine Coolant Temperature Indicator Light
4-38
CX-5_8FN1-EA-16L_Edition1.indb 352016/12/12 10:05:49
Page 180 of 664
4–36
When Driving
Instrument Cluster and Display
*Some models.
Signal Indicator Page
Shift Position Indication
4-44
Lights-On Indication/Indicator Light
4-51
Headlight High-Beam Indicator Light Headlight High-
Low Beam 4-54
Flashing the Headlights 4-54
Turn Signal/Hazard Warning Indicator Lights Turn and Lane-
Change Signals 4-57
Hazard Warning Flasher 4-65
(Green) Brake Pedal Operation demand Indicator Light
4-71
AUTOHOLD Active Indicator Light
*1
4-78
* Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop &
Go function) indicator Light 4-132
TCS/DSC Indicator Light *1 Traction Control
System (TCS) 4-83
Dynamic
Stability Control (DSC) 4-85
Turns on 7-26
TCS OFF Indicator Light
*1
4-84
* Select Mode Indication 4-88
(Green) * High Beam Control System (HBC) Indicator Light
4-98
CX-5_8FN1-EA-16L_Edition1.indb 362016/12/12 10:05:49
Page 181 of 664
4–37
When Driving
Instrument Cluster and Display
*Some models.
Signal Indicator Page
* Blind Spot Monitoring (BSM) OFF Indicator Light *1 Malfunction
7-26
Except
malfunction 4-104
(White) * Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop &
Go function) Main Indication 4-126
(Green) * Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop &
Go function) Set Indication 4-126
(White/Green) * Lane-keep Assist System (LAS) & Lane Departure Warning System
(LDWS) Indication 4-139
* Lane-keep Assist System (LAS) & Lane Departure Warning System
(LDWS) OFF Indicator Light *1 4-144
* Smart City Brake Support (SCBS) Indication
4-151
(Red) * Smart City Brake Support (SCBS) Indicator Light
4-151
* Smart Brake Support/Smart City Brake Support (SBS/SCBS) OFF Indicator \
Light *1 Smart City
Brake Support
(SCBS) System 4-152
Smart Brake
Support (SBS) System 4-155
(White) * Cruise Main Indication
4-168
(Green) * Cruise Set Indication
4-168
*1 The light turns on when the ignition is switched on for an operation che\
ck, and turns off a few seconds later or
when the engine is started. If the light does not turn on or remains tur\
ned on, have the vehicle inspected at an
Authorized Mazda Dealer.
CX-5_8FN1-EA-16L_Edition1.indb 372016/12/12 10:05:50
Page 187 of 664
4–43
When Driving
Automatic Transaxle
Shift-Lock System
The shift-lock system prevents shifting out
of P unless the brake pedal is depressed.
To shift from P:
1. Depress and hold the brake pedal.
2. Start the engine.
3. Press and hold the lock-release button.
4. Move the selector lever.
NOTE
When the ignition is switched to ACC or
the ignition is switched off, the selector
lever cannot be shifted from P.
The ignition cannot be switched to OFF
if the selector lever is not in P.
Shift-Lock Override
If the selector lever will not move from P
using the proper shift procedure, continue
to hold down the brake pedal.
1. Remove the shift-lock override cover using a cloth-wrapped fl at head
screwdriver.
2. Insert a screwdriver and push it down.
Cover
3. Press and hold the lock-release button.
4. Move the selector lever.
Take the vehicle to an Authorized Mazda
Dealer to have the system checked.
Transaxle Ranges
The shift position indicator light in the
instrument cluster illuminates. Refer
to Warning/Indicator Lights on page
4-32 .
The selector lever must be in P or N to
operate the starter.
P (Park)
P locks the transaxle and prevents the front
wheels from rotating.
WARNING
Always set the selector lever to P and set
the parking brake: Only setting the selector lever to the
P position without using the parking
brake to hold the vehicle is dangerous.
If P fails to hold, the vehicle could move
and cause an accident.
CAUTION
Shifting into P, N or R while the vehicle is moving can damage your transaxle.
Shifting into a driving gear or reverse when the engine is running faster than
idle can damage the transaxle.
R (Reverse)
In position R, the vehicle moves only
backward. You must be at a complete
stop before shifting to or from R, except
under rare circumstances as explained in
Rocking the Vehicle (page 3-51 ).
N (Neutral)
In N, the wheels and transaxle are not
locked. The vehicle will roll freely even
on the slightest incline unless the parking
brake or brakes are on.
CX-5_8FN1-EA-16L_Edition1.indb 432016/12/12 10:05:52
Page 194 of 664
4–50
When Driving
Automatic Transaxle
Driving Tips
WARNING
Do not let the vehicle move in a
direction opposite to the direction
selected by the selector lever: Do not let the vehicle move backward
with the selector lever in a forward
position, or do not let the vehicle
move forward with the selector lever
in the reverse position. Otherwise, the
engine may stop, causing the loss of
the power brake and power steering
functions, and make it diffi cult to
control the vehicle which could result
in an accident.
Passing
For extra power when passing another
vehicle or climbing steep grades, depress
the accelerator fully. The transaxle will
shift to a lower gear, depending on vehicle
speed.
NOTE
The accelerator pedal may initially feel
heavy as it is being depressed, then feel
lighter as it is depressed further. This
change in pedal force aids the engine
control system in determining how
much the accelerator pedal has been
depressed for performing kickdown,
and functions to control whether or not
kickdown should be performed.
While the selector lever is in the M
position and the TCS is turned off,
manual shift mode does not switch
to automatic shift mode even if the
accelerator pedal is completely
depressed. Operate the selector lever.
Climbing steep grades from a stop
To climb a steep grade from a stopped
position:
1. Depress the brake pedal.
2. Shift to D or M1, depending on the load weight and grade steepness.
3. Release the brake pedal while gradually accelerating.
Descending steep grades
When descending a steep grade, shift to
lower gears, depending on load weight and
grade steepness. Descend slowly, using the
brakes only occasionally to prevent them
from overheating.
CX-5_8FN1-EA-16L_Edition1.indb 502016/12/12 10:05:53