display MAZDA MODEL CX-5 2017 (in English) Repair Manual

4–121
When Driving
i-ACTIVSENSE
*Some models.
Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function)
*
The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) system is designed to maintain headway control *1 with a vehicle ahead according
to your vehicle's speed using a radar sensor (front) to detect the dis\
tance to the vehicle ahead
and a preset vehicle speed without you having to use the accelerator or \
brake pedals.

*1 Headway Control: Control of the distance between your vehicle and the ve\
hicle ahead detected by the Mazda Radar Cruise Control (MRCC) system.

Additionally, if your vehicle starts closing in on the vehicle ahead such as if the \
vehicle
ahead brakes suddenly, a warning sound and a warning indication in the display are
activated simultaneously to alert you to maintain a suf fi cient distance between the vehicles.
If the vehicle ahead stops while you are following behind it, your vehic\
le will stop and be
held stopped automatically (stop hold control), and headway control wi\
ll resume when you
resume driving the vehicle such as by pressing the RES switch.
Also refer to the following before using the Mazda Radar Cruise Control \
with Stop & Go
function (MRCC with Stop & Go function).
   AUTOHOLD (page 4-75 )  Forward Sensing Camera (FSC) (page 4-156 )  Radar sensor (front) (page 4-162 )
WARNING
Do not rely completely on the Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function):
The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function)
system is designed to reduce load on the driver, and although it maintains a constant
vehicle speed, or specifi cally, it maintains a constant distance between your vehicle and
the detected vehicle ahead according to your vehicle speed, the system has detection
limitations depending on the type of vehicle ahead and its conditions, the weather
conditions, and the road conditions. Additionally, the system may be unable to decelerate
suffi ciently to avoid hitting the vehicle ahead if the vehicle ahead applies the brakes
suddenly or another vehicle cuts into the driving lane, which could result in an accident.
Always drive carefully and verify the surrounding conditions and depress the brake pedal
or accelerator pedal while keeping a safer distance from vehicles ahead or on-coming
vehicles.

CX-5_8FN1-EA-16L_Edition1.indb 1212016/12/12 10:06:09

4–124
When Driving
i-ACTIVSENSE
Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) Display Indication
The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop \
& Go
function) setting status and operation conditions are indicated on the \
multi-information
display and the active driving display.

MRCC Distance
between vehicle
display
MRCC Set vehicle speed Vehicle ahead display
Vehicle ahead display
MRCC Distance
between vehicle
display
MRCC Set
vehicle speed
Active driving display
Active Driving Display (Windshield Type)
Active Driving Display (Auto Flip-up Type)
Multi-information displayMRCC Distance
between vehicle
display
MRCC Set vehicle speed Vehicle ahead display
Vehicle ahead display
MRCC Distance
between vehicle
display
MRCC Set
vehicle speed
Active driving display
Multi-information display

CX-5_8FN1-EA-16L_Edition1.indb 1242016/12/12 10:06:10

4–125
When Driving
i-ACTIVSENSE
If there is a problem with the Mazda Radar Cruise Control with Stop & Go\
function (MRCC
with Stop & Go function) system, a message is displayed on the multi-in\
formation display.
Check the center display to verify the problem and then have your vehicl\
e inspected by an
Authorized Mazda Dealer.
Refer to Message Indicated on Display on page 7-37 .
Close Proximity Warning
If your vehicle rapidly closes in on the vehicle ahead because the vehic\
le ahead applies
the brakes suddenly while you are traveling in headway control, the warn\
ing sound
activates and the brake warning is indicated in the display. Always verify the safety of
the surrounding area and depress the brake pedal while keeping a safer d\
istance from the
vehicle ahead. Additionally, keep a safer distance from the vehicles behind you.

Multi-information Display
Active Driving Display

NOTE
In the following cases, the warnings and brakes may not operate even if \
your vehicle starts
closing in on the vehicle ahead.
  You are driving your vehicle at the same speed as the vehicle ahead.  Directly after the Mazda Radar Cruise Control with Stop & Go function (MRCC with
Stop & Go function) system has been set.
  Directly after the accelerator pedal is released.  Another vehicle cuts into the driving lane.
CX-5_8FN1-EA-16L_Edition1.indb 1252016/12/12 10:06:10

4–126
When Driving
i-ACTIVSENSE
Setting the System
The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop \
& Go
function) system operates when all of the following conditions are met.\
  Vehicle speed is 0 km/h (0 mph) to 145 km/h (90 mph)  The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop \
& Go
function) is turned on.
   The brake pedal is not depressed.  The electric parking brake (EPB) is released (electric parking brake \
(EPB) indicator light
is turned off).
   There is no problem with the DSC.  All the doors are closed.  The driver's seat belt is fastened.  The selector lever is in the drive (D) position or manual (M) positi\
on (manual mode).
NOTE
  In the following cases, the Mazda Radar Cruise Control with Stop & Go function (MRCC
with Stop & Go function) system is canceled when the vehicle is traveli\
ng at 30 km/h
(20 mph) or less and “Mazda Radar Cruise Control disabled under 30 km/h (20 mph) ” is
displayed in the multi-information display.
  The Forward Sensing Camera (FSC) cannot detect target objects (There is problem
with the Forward Sensing Camera (FSC) or windshield is dirty).
  There is a problem with the stop hold control function.  There is a problem with the electric parking brake (EPB).   It may not be possible to set the Mazda Radar Cruise Control with Stop & Go function
(MRCC with Stop & Go function) system directly after starting the engine, while the DSC
operation is being checked.


CANCEL switchRES switch
OFF switch
switch switch
MODE switch
SET- switch
SET+ switch

CX-5_8FN1-EA-16L_Edition1.indb 1262016/12/12 10:06:10

4–127
When Driving
i-ACTIVSENSE
Turning on the system
When the MODE switch is pressed once, the Mazda Radar Cruise Control with Stop & Go
function (MRCC with Stop & Go function) system turns on, and the Mazda\
Radar Cruise
Control with Stop & Go function (MRCC with Stop & Go function) system \
main indication
(white) turns on and the vehicle speed and the distance between the ve\
hicles while in
headway control can be set.


In addition, the Mazda Radar Cruise Control with Stop & Go function (MR\
CC with Stop &
Go function) system display indication is displayed on the multi-inform\
ation display and the
active driving display at the same time.
NOTE
   If the ignition is switched off while the Mazda Radar Cruise Control with Stop & Go
function (MRCC with Stop & Go function) system is operating, the syste\
m will be
operable when the ignition is switched ON the next time.
  When the MODE switch is pressed a second time while the Mazda Radar Cruise Control
with Stop & Go function (MRCC with Stop & Go function) system is operating, the system
switches to the cruise control function.
 Refer to Cruise Control Function on page 4-133 .
CX-5_8FN1-EA-16L_Edition1.indb 1272016/12/12 10:06:10

4–128
When Driving
i-ACTIVSENSE
How to set the speed
1. Adjust the vehicle speed to the desired setting using the accelerator pe\
dal.
2. Headway control begins when the SET
or SET switch is pressed.
The set speed and the inter-vehicle distance display fi lled with white lines is displayed.
The Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop \
& Go
function) main indicator (white) switches to the Mazda Radar Cruise C\
ontrol with Stop
& Go function (MRCC with Stop & Go function) set indicator (green) a\
t the same time.



Travel status Multi-information display Active driving display
During travel at constant speed


During travel under headway control



NOTE
 
 If a vehicle ahead is detected while traveling at a constant speed, the \
vehicle-ahead
indication is displayed and headway control is performed. Additionally, when a vehicle
ahead is no longer detected, the vehicle-ahead indication turns off and \
the system
switches back to travel at constant speed.
  The lowest possible speed which can be set on the Mazda Radar Cruise Con\
trol with Stop
& Go function (MRCC with Stop & Go function) system is 30 km/h (20 mp\
h).
  Headway control is not possible if the vehicle ahead is driving faster than your vehi\
cle's
set speed. Adjust the system to the desired vehicle speed using the accelerator pedal.

CX-5_8FN1-EA-16L_Edition1.indb 1282016/12/12 10:06:10

4–129
When Driving
i-ACTIVSENSE
How to set the distance-between-vehicles during headway control
The distance-between-vehicles is set to a shorter distance by pressing t\
he
switch. The
distance-between-vehicles is set to a longer distance by pressing the
switch. The distance-
between-vehicles can be set to 4 levels; Long, medium, short, and extrem\
ely short distance.

Distance-between-vehicles guideline
(at 80 km/h (50 mph) vehicle speed) Indication on multi-information
display Indication on active driving
display
*1
Long (about 50 m (164 ft))


Medium (about 40 m (131 ft))


Short (about 30 m (98 ft))


Extremely short (about 25 m (82 ft))


*1 Displays a pop-up image in the active driving display only when the driv\
er operates the switch.


NOTE
   The distance-between-vehicles differs depending on the vehicle speed, an\
d the slower the
vehicle speed, the shorter the distance.
  When the ignition is switched to ACC or OFF and then the engine is started again, the
system automatically sets the distance-between-vehicles to the previous setting.

CX-5_8FN1-EA-16L_Edition1.indb 1292016/12/12 10:06:11

4–130
When Driving
i-ACTIVSENSE
How to change the set vehicle speed
To accelerate/decelerate using the SET
switch
When you press the SET
switch, the
vehicle accelerates and when you press the
SET
switch, it decelerates.

Short press 1 km/h (1 mph)
Long press 10 km/h (5 mph)

NOTE
For example, the set vehicle speed is
changed by pressing the SET switch four
times as follows:
The vehicle speed accelerates or
decelerates by 4 km/h (4 mph).

To increase speed using accelerator
pedal
Depress the accelerator pedal and press
and release the SET
switch or SET
switch at the desired speed. If the switch is
not operated, the system returns to the set
speed after you release your foot from the
accelerator pedal.
CAUTION
The warnings and brake control do not
operate while the accelerator pedal is
depressed.

NOTE
   The setting speed can be changed by
operating the SET
switch or SET
switch during stop hold control.
   When accelerating using the SET
switch while in headway control, the set
vehicle speed can be adjusted but
acceleration is not possible. If there is
no longer a vehicle ahead, acceleration
continues until reaching the set vehicle
speed. For the set vehicle speed, check
the set vehicle speed indication in the
display.
   When depressing the accelerator pedal,
the inter-vehicle distance indication in
the display changes to the white-line
indication.

Canceling the system
When the following operations are
performed, the Mazda Radar Cruise
Control with Stop & Go function (MRCC
with Stop & Go function) system is
canceled, and the Mazda Radar Cruise
Control with Stop & Go function (MRCC
with Stop & Go function) set indicator
(green) switches to the Mazda Radar
Cruise Control with Stop & Go function
(MRCC with Stop & Go function) main
indicator (white) at the same time.
  The OFF/CAN switch is pressed.  The brake pedal is depressed.  The electric parking brake (EPB) is
applied.
   The selector lever is in the P (Park), N
(Neutral), or R (Reverse) position.
   Any of the doors is opened.  The driver's seat belt is unfastened.

CX-5_8FN1-EA-16L_Edition1.indb 1302016/12/12 10:06:12

4–131
When Driving
i-ACTIVSENSE
Under the following conditions, the
Mazda Radar Cruise Control with Stop
& Go function (MRCC with Stop & Go
function) cancel indication is displayed in
the multi-information display and a single
beep sound is heard.
  The DSC has operated.  The Smart Brake Support (SBS) has
operated.
   The Smart City Brake Support (SCBS)
has operated.
   When traveling on a downslope for a
long period of time.
   There is a problem with the system.  The engine has stalled.  The electric parking brake (EPB) is
automatically applied during stop hold
control.
   The radar sensor (front) cannot detect
target objects (during rain, fog, snow or
other inclement weather conditions, or
when the radiator grille is dirty).

Resuming control
If the Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop &
Go function) system is canceled, you can
resume control at the previously set speed
by pressing the RES switch and after all of
the operation conditions have been met.
NOTE
If the set speed is not indicated in the
display, the control does not resume even
if the RES switch is pressed.

Turning off the system
Press the OFF/CAN switch two times
while the Mazda Radar Cruise Control
with Stop & Go function (MRCC with
Stop & Go function) system is operating to
switch off the system.
CX-5_8FN1-EA-16L_Edition1.indb 1312016/12/12 10:06:12

4–133
When Driving
i-ACTIVSENSE
Resume driving information
If you do not resume driving within a few seconds after the vehicle ahea\
d starts moving,
the multi-information display vehicle-ahead indication fl ashes to urge the driver to resume
driving.
Cruise Control Function
While this function is operating, the
headway control operation is canceled and
only the cruise control function operates.
The vehicle speed can be set more than
about 25 km/h (16 mph).
Use the cruise control function on
expressways and other highways which do
not require a lot of repeated acceleration
and deceleration.
WARNING
Do not use the cruise control function in
the following locations: Otherwise, it could lead to an accident.
 Roads with sharp curves and where vehicle traffi c is heavy and there is
insuffi cient space between vehicles.
(Driving under these conditions
using the cruise control function is
not possible)
 Steep down slopes (Set speed may be exceeded because suffi cient
engine braking cannot be applied)
 Slippery roads such as ice or snow- bound roads (Tires could spin
causing you to lose vehicle control)

Always drive carefully: The warnings and brake control
will not operate after the headway
control function is canceled and the
system is switched to only the cruise
control function. Depress the brake
pedal to decelerate according to the
surrounding conditions while keeping
a safer distance from the vehicle ahead
and always driving carefully.

Switching to cruise control function
When the MODE switch is pressed while
the Mazda Radar Cruise Control with Stop
& Go function (MRCC with Stop & Go
function) system is turned on, the system
switches to the cruise control function.
When the system switches to the cruise
control function, the indicator and multi-
information display notify the driver as
follows:
  The Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop
& Go function) set indication (green)
or the Mazda Radar Cruise Control
with Stop & Go function (MRCC with
Stop & Go function) main indication
(white) is turned off, and the cruise main
indication (white) is turned on.
   A message is displayed in the multi-
information display.

WARNING
Always turn off the cruise control
function when it is not in use: Leaving the cruise control function
turned on when it is not in use
is dangerous as it could operate
unexpectedly, resulting in an accident.

How to set the speed
Adjust the system to the desired vehicle
speed using the accelerator pedal.
When the SET
or SET switch is
pressed, the cruise set indication (green) is
turned on and headway control begins.
CX-5_8FN1-EA-16L_Edition1.indb 1332016/12/12 10:06:13