turn signal MAZDA MODEL MX-30 EV 2022 Owner's Guide

▼i-ACTIVSENSE Warning
Indication/Warning Light*
The indication displays if the system
has a malfunction.
Check the reason for the indication
displaying on the center display or
multi-information display.
Refer to If a Warning Light Turns On or
Flashes on page 7-21.
▼Exterior Light Warning Indication/
Warning Light
This light illuminates if there is a
malfunction in the exterior lights
(except license plate lights). Have your
vehicle inspected by an Authorized
Mazda Dealer.
CAUTION
Do not drive the vehicle while an
exterior light has a malfunction. Poor
visibility, and not being able to signal
braking and turns may cause an
accident. In addition, if the vehicle is
driven with the lights not turned on, it
may con
flict with laws and regulations
due to poor maintenance.
▼ Seat Belt Warning Indication/
Warning Light (Front seat)
The seat belt warning light turns on if
the driver or front passenger's seat is
occupied and the seat belt is not
fastened with the power switch
switched ON.
If the driver or front passenger's seat
belt is unfastened (only when the front
passenger's seat is occupied) and if the
vehicle is driven at about 20 km/h (12
mph) or faster, or about 10 km/h (6
mph) or faster for a continuous 30
seconds, with the seat belt unfastened,
the warning light
flashes for a certain
period. After a short time, the warning
light stops flashing , but remains
illuminated.
NOTE
The warning light flashes for about 6
seconds if the driver or front
passenger's seat is not fastened
when the power switch is switched
ON.
Placing heavy items on the front
passenger's seat may cause the front
passenger's seat belt warning
function to operate depending on
the weight of the item.
To allow the front passenger
occupant classi fication sensor to
function properly, do not place and
sit on an additional seat cushion on
the front passenger's seat. The
sensor may not function properly
because the additional seat cushion
could cause sensor interference.
If a small child is seated on the front
passenger's seat, the warning light
may not operate.
Action to be taken
Fasten the seat belts.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.7-29
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

▼Blind Spot Monitoring (BSM)
System Warning Beep*
The Blind Spot Monitoring (BSM)
warning beep operates when the turn
signal lever is operated to the side
where the Blind Spot Monitoring
(BSM) warning light is illuminated.
▼Front Cross Tra
ffic Alert (FCTA)
Warning Beep*
The Front Cross Tra ffic Alert (FCTA)
warning beep is activated if there is a
possibility of collision with a vehicle
approaching from the front on the left
and right sides of the vehicle.
▼ Rear Cross
Traffic Alert (RCTA)
Warning Beep*
The Rear Cross Tra ffic Alert (RCTA)
warning beep is activated if there is a
possibility of collision with a vehicle
approaching from the rear on the left
and right sides of the vehicle.
▼ Lane/Road Departure Warning
Beep*
The warning beep is activated when
the system determines that the vehicle
may depart from the lane or the road.
Check whether the vehicle has not
deviated from the driving lane/road.
▼Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function) System
Warnings
*
The Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop
& Go function) system warnings notify
the driver of system malfunctions and
cautions on use when required.
Check based on the beep sound.
Warning beep type Noti
fication content
The beep sounds 1
time while the Mazda
Radar Cruise Control
with Stop & Go func-
tion (MRCC with Stop
& Go function) is op-
erating. If a malfunction occurs
in the system, make
sure that the Mazda
Radar Cruise Control
with Stop & Go func-
tion (MRCC with Stop
& Go function) has
been canceled.
The beep sounds in-
termittently while the
Mazda Radar Cruise
Control with Stop &
Go function (MRCC
with Stop & Go func-
tion) is operating. The distance between
your vehicle and the
vehicle ahead is too
close. Check the safety
of the surrounding
area and reduce vehi-
cle speed.
▼
Excessive Speed Warning*
If the vehicle speed exceeds the speed
limit sign displayed in
the active driving
display/instrument cluster, the area
around the speed limit sign flashes in
amber and the warning sound is
activated at the same time. If the
vehicle speed continues to exceed the
displayed speed limit sign, the
indication stops flashing and remains
on.
▼ Collision warning*
If there is a possibility of a collision
with a vehicle ahead, a warning sound
is activated at the same time as the
warning indications are displayed in
the instrument cluster or active driving
display.
▼Door-ajar Warning Beep
A warning beep is activated if the
vehicle is driven with any door or
liftgate ajar. Drive the vehicle after
closing the doors and liftgate.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-40*Some models.
MX
-30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07

Index
Luggage compartment.......... 5-46
Overhead console................ 5-45
Storage pocket..................... 5-45
Storage Pocket.......................... 5-45
Sunshade.................................. 3-53
Sunvisors.................................. 5-36
T
Temperature Control Switch/
Icon............................................5-5
Three- flash Turn Signal...............4-40
Tiedown Hook.......................... 7-19
Tires......................................... 6-23 Flat tire.................................. 7-3
Replacing a tire.................... 6-24
Replacing a wheel................ 6-25
Snow tires............................ 3-58
Speci fications......................... 9-5
Tire chains............................3-58
Tire in flation pressure............6-23
Tire rotation......................... 6-24
Uniform tire quality grading
system (UTQGS)................... 8-19
Tire Information Location of the tire label
(placard).............................. 8-24
Steps for determining the correct
load limit............................. 8-31
Tire labeling......................... 8-21
Tire maintenance.................. 8-26
Vehicle loading.....................8-28
Tire Pressure Monitoring
System.................................... 4-180
Tool Storage................................7-3
Touch Panel Basic Operation........ 5-4
Touch Sensor Inoperable Warning
Beep (With the advanced keyless
function)...................................7-38
To w i n g Recreational towing.............. 3-61
Trailer towing....................... 3-61
Towing Description................... 7-18
Traction Control System (TCS).... 4-64 TCS OFF Indicator Light......... 4-64
TCS OFF switch.................... 4-65
TCS/DSC indicator light........4-64
Tra ffic Sign Recognition System
(TSR)........................................ 4-93
Trouble Depleted Lead-acid Battery... 7-12
Emergency starting................7-17
Flat tire.................................. 7-3
Fully Discharged High Voltage
Battery................................. 7-16
Parking in an emergency......... 7-2
When liftgate cannot be
opened................................ 7-42
Turn and Lane-Change Signals.... 4-39
Turn Signals.............................. 4-39
V
Vehicle Information Labels Chassis number...................... 9-2
Motor vehicle safety standard
label...................................... 9-2
Tire pressure label.................. 9-2
Vehicle emission control
information label.................... 9-2
Ve h i c l e i d e n t i fication
number..................................9-2
Vehicle Problem Warning Beep...7-39
W
Warning Sound is Activated AUTOHOLD warning beep.... 7-39
Blind Spot Monitoring (BSM)
warning beep....................... 7-40
Brake override warning
beep.................................... 7-39
Brake system warning beep....7-39
10-9
MX -30_8JD4-EA -21G_Edition2_new 2021-5-18 14:38:07