service MERCEDES-BENZ CLA 2014 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2014, Model line: CLA, Model: MERCEDES-BENZ CLA 2014Pages: 354, PDF Size: 4.19 MB
Page 203 of 354
AUX mode (Auxiliary audio mode: external
audio source connected).
TV operation
Function
Channel frequency with memory position
iThe memory positionis only displayed
with channel if this has been stored.
XSwitch on COMAND and select TV; see the
separate operating instructions.
XPress the or button on the
steering wheel to select theAudiomenu.
XTo selectastoredchannel:briefly press
the or button.
XTo selectachannel from the channel
list:press and briefly hold the
or button.
iStoring a TV channel; see the separate
operating instructions.
Video DVD operation
DVD changer display (example)
Current DVD in the DVD changer
Current scene
XSwitch on COMAND and select video DVD;
see the separate operating instructions.
XPress the or button on the
steering wheel to select theAudiomenu.
XTo selectthe next/previous scene:
briefly press the or button.
XTo selectascene from the scene list
(rapid scrolling):press and hold the
or buttonuntil desired scene
has been reached.
Telephone menu
Introduction
GWARNING
If you operate informationsystems and
communication equipment integrated in the
vehicle while driving, you will be distracted
from traffic conditions. You could also lose
control of the vehicle. There is a risk of an
accident.
Only operate the equipmentwhen the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the
equipment when the vehicle is stationary.
When telephoning, you must observe the
legal requirements for the country in which
you are currently driving.
XSwitch on your mobile phone and audio
system or COMAND, see the separate
operating instructions.
XEstablish a Bluetooth®connection to the
audio system or COMAND; see the
separate operating instructions.
XPress the or button on the
steering wheel to select theTelmenu.
You will see one of the following display
messages in the multifunction display:
RPhone READYor the name of the network
provider: the mobile phone has found a
network and is ready to receive.
RPhone No Service: there is no network
available or the mobile phone is searching
for a network.
Menus and submenus201
On-board computer and displays
Z
Page 207 of 354
multifunction display in the assistance
graphics display.
For further information about ATTENTION
ASSIST, see (Ypage 186).
Activating/deactivating Blind Spot
Assist
XPress the or button on the
steering wheel to select theDriveAssist
menu.
XPress the or button to select
Blind Spot Assist.
XPress the button.
The current selection is displayed.
XTo activate/deactivate:press the
button again.
For further information about Blind Spot
Assist, see (Ypage 188).
When theBlind Spot Assist: Sensors
Deactivatedmessage is shown, the radar
sensors are deactivated.
XSwitch on the radarsensor system
(Ypage 208).
Activating/deactivating Lane Keeping
Assist
XPress the or button on the
steering wheel to select theDriveAssist
menu.
XPress or to selectLane
Keeping Assist.
XPress the button.
The currentselection is displayed.
XPress to confirm.
XPress the or button to setOff,
StandardorAdaptive.
XPress the button to save the setting.
When Lane Keeping Assist is activated, the
multifunction display shows the lane
markings as bright lines in the assistance
graphic.
For further information about Lane Keeping
Assist, see (Ypage 190).
Maintenance menu
In theServicemenu, you have the following
options:
RCalling up display messages in message
memory (Ypage 212)
RChecking the tire pressure electronically
(Ypage 320)
Restarting the tire pressure loss warning
system (Canada only) (Ypage 319)
RCalling up the service due date
(Ypage 284)
Settings menu
Introduction
In theSettingsmenu, you have the following
options:
RChanging the instrument cluster settings
RChanging the light settings
RChanging the vehicle settings
RChanging the convenience settings
RRestoring the factory settings
Menus and submenus205
On-board computer and displays
Z
Page 208 of 354
Instrumentcluster
Selecting the unit of measurement for
distance
You can determine whether the multifunction
display shows some messages in miles or
kilometers.
XPress the or button on the
steering wheel to selecttheSettmenu.
XPress the or button to select the
Inst. Clustersubmenu.
XPress to confirm.
XPress the or button to select the
Display Unit Speed-/Odometer:
function.
You will see the selected settingkmor
miles.
XPress the button to save the setting.
The selected unit of measurement for
distance applies to:
Rthe digital speedometer in theTripmenu
Rthe odometer and the trip odometer
Rthe trip computer
Rthe current consumption and the range
Rthe navigation instructions in theNavi
menu
Rcruise control
RDISTRONIC PLUS
RASSYST PLUS service interval display
Switching the additional speedometer
on/off
TheSpeedometer [km/h]:or
Speedometer [mph]:function allows you to
choose whether the status area in the
multifunction display always shows the speed
inkm/hor inmphinstead of the outside
temperature.
XPress the or button on the
steering wheel to select theSettmenu.
XPress the or button to select the
Inst. Clustersubmenu.
XPress to confirm.
XPress or to select the
Speedometer [km/h]:orSpeedometer
[mph]function.
You will see the selected setting:onor
off.
XPress the button to save the setting.
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
XPress the or button on the
steering wheel to select theSett.menu.
XPress the or button to select the
Inst. Clustersubmenu.
XPress to confirm.
XPress the or button to select the
Permanent Display:function.
You will see the selected settingOutside
TemperatureorSpeedometer [km/h]/
Speedometer [mph].
XPress the button to save the setting.
iThe speed is displayed in km/h/mph.
Lights
Switching the daytime running lamps on/
off
Canada only:daytime running lamps are
required by law. You cannot set theDaytime
Running Lightsfunction via the on-board
computer.
XPress the or button on the
steering wheel to select theSettings
menu.
XPress the or button to select the
Lightssubmenu.
XPress to confirm.
XPress the or button to select the
Daytime Running Lights:function.
If theDaytime Running Lightsfunction
has been switched on, the cone of light and
206Menus and submenus
On-board computer and displays
Page 221 of 354
Display messagesPossible causes/consequences and Solutions
(USA
only) (Canada
only)
Check Brake Fluid
Level
There is notenough brake fluid in the brake fluid reservoir.
In addition, the (USA only)/ (Canada only) warning
lamp lights up in the instrument cluster and a warning tone
sounds.
GWARNING
The braking effect may be impaired.
There is a riskofanaccident.
XPull overand stop the vehicle safely as soonas possible, paying
attention to road and traffic conditions. Do not continue driving
under any circumstances.
XSecure the vehicle against rolling away (Ypage 153).
XConsult a qualified specialist workshop.
XDo not add brake fluid. This does not correct the malfunction.
Check Brake Pad
Wear
The brake pads/linings have reached their wear limit.
XVisit a qualified specialist workshop.
mbrace Inoperative
One or more main features of the mbrace system are
malfunctioning.
XHave the mbrace system checked immediately at a qualified
specialist workshop.
SRS Malfunction
Service Required
There is a malfunction in the SRS (Supplemental Restraint
System). The warning lamp also lights up in the instrument
cluster.
GWARNING
The air bags or Emergency Tensioning Devices may either be
triggered unintentionally or, in the event of an accident, may not
be triggered.
There is an increased risk of injury.
XVisit a qualified specialist workshop.
Further information on occupant safety (Ypage 38).
Display messages219
On-board computer and displays
Z
Page 222 of 354
Display messagesPossible causes/consequences and Solutions
Front Left
Malfunction
Service Required
orFront Right
Malfunction
Service Required
SRS has malfunctioned at the front on the left or right. The
warning lamp also lights up in the instrumentcluster.
GWARNING
The air bags or Emergency Tensioning Devices may either be
triggered unintentionally or, in the event of an accident, may not
be triggered.
There is an increased risk of injury.
XVisit a qualified specialist workshop.
Rear Left
Malfunction
Service Required
orRear Right
Malfunction
Service Required
SRS has malfunctionedat the rear on the left or right. The
warning lamp also lights up in the instrument cluster.
GWARNING
The airbags or Emergency Tensioning Devices may either be
triggered unintentionally or, in the event of an accident, may not
be triggered.
There is an increased riskofinjury.
XVisitaqualified specialist workshop.
Left Side Curtain
AirbagMalfunction
Service Required
orRight Side
Curtain Airbag
Malfunction
Service Required
There is a malfunction in the left-hand or right-hand window
curtain air bag. The warning lamp also lights up in the
instrument cluster.
GWARNING
The left or right window curtain air bag may either be triggered
unintentionally or, in the event of an accident, may not be
triggered.
There is an increased risk of injury.
XVisit a qualified specialist workshop.
220Display messages
On-board computer and displays
Page 239 of 354
Display messagesPossible causes/consequences and Solutions
ToDeselectPorN,
Depress Brake and
Start Engine
You have attempted to shift the transmissionto positionRorD
without starting the engine.
XStart the engine.
XDepress the brake pedal.
iIt is only possible to shift the transmission from positionPto
the desired position if you depress the brake pedal. Only then
can the parking lock be deactivated. If you do not depress the
brake pedal, you can move the DIRECT SELECT lever but the
parking lock remains engaged.
iAt transmission fluid temperatures below 4 ‡ ( 20 †) you
can only shift out of positionPinto another transmission
position when the engine is running.
Apply Brake to
Shift from 'P'
You have attempted to move the transmission selector lever to
positionR,NorDwithout depressing the brake pedal.
XDepress the brake pedal.
Transmission Not
in P
Risk of Vehicle
Rolling Away
The driver's door is open and the transmission is in positionR,N
orD.
Awarning tone also sounds.
XShift the transmission to positionP.
XSecure the vehicle against rolling away (Ypage 153).
Service Required
DoNotShiftGears
Visit Dealer
You cannotchange the transmission position due to a malfunction.
Awarning tone also sounds.
If transmission positionDis selected:
XDrive to a qualified specialist workshop without shifting the
transmission from positionD.
If transmission positionR,NorPis selected:
XNotify a qualified specialist workshop or breakdown service.
Only Sift to 'P'
when Vehicle
is Stationary
The vehicle is moving.
XPull overand stop the vehicle safely as soonas possible, paying
attention to road and traffic conditions.
XShift the transmission to positionP.
Reversing Not
Possible Service
Required
The automatic transmission is malfunctioning. You cannot back
up.
XVisit a qualified specialist workshop.
Display messages237
On-board computer and displays
Z
Page 241 of 354
Display messagesPossible causes/consequences and Solutions
\rThe hood is open.
GWARNING
The open hood may blockyour view when the vehicle is in motion.
There is a risk of an accident.
XPull over and stop the vehicle safely as soon as possible, paying
attention to road and traffic conditions.
XApply the electric parking brake.
XClose the hood.
At least one door is open.Awarning tone also sounds.
XClose all the doors.
Power Steering
Malfunction See
Operator's Manual
The power steering is malfunctioning.
Awarning tone also sounds.
GWARNING
You will need to use more force to steer.
There is a riskofanaccident.
XCheck whetheryou are able to apply the extra force required.
XIf you are able to steer safely:carefully drive on to a qualified
specialist workshop.
XIf you are unable to steer safely:do not drive on. Contact the
nearest qualified specialist workshop.
Phone No ServiceYour vehicle is outside the network provider's transmitter/
receiver range.
XWait until the mobile phone operational readiness symbol
appears in the multifunction display.
Check Washer Fluid
The washer fluid level in the washer fluid reservoir has dropped
below the minimum.
iIf you do not mix antifreeze with the washer fluid in the winter
months, then the washer fluid could freeze in the washer fluid
reservoir. In this case, theCheck Washer Fluiddisplay
message may appear in the multifunction display.
XAdd washer fluid (Ypage 283).
Display messages239
On-board computer and displays
Z
Page 266 of 354
Socket in the rear-compartment center
console
XPull cover out by its top edge.
XLift up the cover of socket .
Socket in the trunk
XLift up the cover of socket .
mbrace
General notes
You must have a license agreement to
activate the mbrace service. Make sure that
your system is activated and operational. To
log in, press the \nMB Info call button. If
any of the steps mentioned are not carried
out, the system may not be activated.
If you have questions about the activation,
contact one of the following telephone
hotlines:
RUSA:Mercedes-Benz Customer Assistance
Center at
1-800-FOR-MERCedes (1-800-367-6372)
or 1-866-990-9007
RCanada:Customer Service at
1-888-923-8367
Shortly after successfully registering with the
service, a user ID and password will be sent
to you by post.
USA only: you can use this password to log
onto the mbrace area under "Owners Online"
athttp://www.mbusa.com.
The system is available if:
Rit has been activated and is operational
Rthe corresponding mobile phone network
is available for transmitting data to the
Customer Center
Ra service subscription is available
Rthe starter battery is sufficiently charged
iDetermining the location of the vehicle on
a map is only possible if:
RGPS reception is available.
Rthe vehicle position can be forwarded to
the Customer Assistance Center.
The mbrace system
To adjust the volume during a call, proceed
as follows:
XPress the or \nbutton on the
multifunction steering wheel.
or
XUse the volume controller of the audio
system/COMAND.
The system offers various services, e.g:
RAutomatic and manual emergency call
RRoadside Assistance call
RMB Info call
USA only: you can find information and a
description of all available features under
"Owners Online" at http://www.mbusa.com.
264Features
Stowage and features
Page 267 of 354
System self-test
After you have switched on the ignition, the
system carries out a self-diagnosis.
Amalfunction in the system has been
detected if one of the following occurs:
RThe indicator lamp in the SOSbutton does
not come on during the system self-test.
RThe indicator lamp in the Roadside
Assistance buttondoes not light up during
self-diagnosis of the system.
RThe indicator lamp in the \nMB Info call
button does not light up during self-
diagnosis of the system.
RThe indicator lamp in one or more of the
following buttons continues to light up red
after the system self-diagnosis:
-SOS button
- Roadside Assistance call button
- \nMB Info call button
RAfter the system self-diagnosis, the
InoperativeorService Not
Activatedmessage appears in the
multifunction display.
If a malfunction is indicated as outlined
above, the system may not operate as
expected. In the event of an emergency, help
will have to be summoned by other means.
Have the system checked at the nearest
authorized Mercedes-Benz Center or contact
the following service hotlines:
RUSA:Mercedes-Benz Customer Assistance
Center at
1-800-FOR-MERCedes (1-800-367-6372)
or 1-866-990-9007
RCanada:Customer Service at
1-888-923-8367
Emergency call
Important safety notes
GWARNING
It can be dangerous to remain in the vehicle,
even if you have pressed the SOS button in an
emergency if:
Ryou see smoke inside or outside of the
vehicle, e.g. if there is a fire after an
accident
Rthe vehicle is on a dangerous section of
road
Rthe vehicle is not visible or cannot easily be
seen by other road users, particularly when
dark or in poor visibility conditions
There is a risk of an accident and injury.
Leave the vehicle immediately in this or
similar situations as soon as it is safe to do
so. Move to a safe location along with other
vehicle occupants. In such situations, secure
the vehicle in accordance with national
regulations, e. g. with a warning triangle.
You must have a license agreement to
activate the mbrace service. Make sure that
your system is activated and operational. To
register, press the \nMB Info call button.
If any of the steps mentioned are not carried
out, the system may not be activated.
If you have questions about the activation,
contact one of the following telephone
hotlines:
RUSA:Mercedes-Benz Customer Assistance
Center at
1-800-FOR-MERCedes (1-800-367-6372)
or 1-866-990-9007
RCanada:Customer Service at
1-888-923-8367
General notes
An emergency call is dialed automatically if
an air bag or Emergency Tensioning Device is
triggered.
iYou cannot end an automatically
triggered emergency call yourself.
Features265
Stowage and features
Z
Page 269 of 354
XPress Roadside Assistance button .
This initiates a call to the Mercedes-Benz
Customer Assistance Center.
The indicator lamp in Roadside Assistance
button flashes while the call is active.
The multifunction display shows the
Connecting Callmessage. The audio
output is muted.
If a connection can be made, theCall
Connectedmessage appears in the
multifunction display.
If a mobile phone network and GPS reception
are available, the system transfers data to the
Mercedes-Benz Customer Assistance Center,
for example:
RCurrent location of the vehicle
RVehicle identification number
iThe audio system or COMAND display
indicates that a call is active. During the
call, you can change to the navigation menu
by pressing the NAVI button on COMAND,
for example.
Voice output is not available.
Avoice connection is established between
the Mercedes-Benz Customer Assistance
Center and the vehicle occupants.
From the vehicle remote malfunction
diagnosis, the Mercedes-Benz Customer
Assistance Center can ascertain the nature of
the problem (Ypage 271).
The Mercedes-Benz Customer Assistance
Center either sends a qualified Mercedes-
Benz technician or makes arrangements for
your vehicle to be transported to the nearest
authorized Mercedes-Benz Center.
You may be charged for services such as
repair work and/or towing.
Further details are available in your mbrace
manual.
iThe system has not been able to initiate
a roadside assistance call, if:
Rthe indicator lamp for Roadside
Assistance call button is flashing
continuously.
Rno voice connection to the Mercedes-
Benz Customer Assistance Center was
established.
This can occur if the relevant mobile phone
network is not available, for example.
TheCall Failedmessage appears in the
multifunction display.
XTo endacall:press the button on the
multifunctionsteering wheel.
or
XPress the corresponding button for ending
a phone call on the audio systemoron
COMAND.
MB Info call button
XPress MB Info call button .
This initiates a call to the Mercedes-Benz
CustomerAssistance Center.
The indicator lamp in MB Info call
button flashes while the connection is
being made. The multifunction display
shows theConnecting Callmessage.
The audio system is muted.
If a connection can be made, theCall
Connectedmessage appears in the
multifunction display.
Features267
Stowage and features
Z