key MERCEDES-BENZ CLK-Class 2009 C208 Comand Manual

89 Satellite radio
Satellite radio operation
You can use the following functions:
Saving stations manually

Selecting a station from the Satellite
preset memory
( page
90)

Selecting a station by entering the
channel number
( page
88)
Saving station manuallyIn the Satellite radio main menu
Press one of the number keys, e.g. 2,
longer than 2 seconds.You will hear a verification beep if the
beep tones option was activated in the
system settings
( page
41)
.
The satellite radio saves the current
station at the memory preset selected.
The memory preset selected will ap
-
pear in the status line, e.g.
SAT2
.
On the memory list
In the Satellite radio main menu, press
the
Presets
soft key.
The SAT preset memory will appear.
Satellite preset memory
Push the joystick to g
or G to se
-
lect a memory preset.

Press
E
longer than 2
seconds.
You will hear a verification beep if the
beep tones option was activated in the
system settings
( page
41)
.
The satellite radio saves the current
station at the memory preset selected.
Memory functionsiThere are 10 presets available.
209_MY09_A_US.book Seite 89 Montag, 26. Mai 2008 6:12 18

90 Satellite radioSatellite radio operationYou will see the Satellite radio main menu
automatically after 8 seconds

if you press s.
Selecting a station on the memory list
In the Satellite radio main menu, press
the
Presets
soft key.
The Satellite preset memory ( page
89)
will appear.

Push the joystick to g
or G to high
-
light a memory preset.

Press E.The Satellite radio main menu will then
appear automatically after 8 seconds,
indicating the memory preset number
in the status line.

In the Satellite radio main menu, press
the
Info
soft key.
The information display will appear.You will see (if available)
the full station name

additional program information
Switching back to the Satellite radio main
menu
Press the
Back
soft key.
or
Press the
Info
soft key again.
iAn existing entry is overwritten in the
memory list when a new input is given.If the message
Updating station list

appears the presets may be overwrit-
ten.
Displaying information
209_MY09_A_US.book Seite 90 Montag, 26. Mai 2008 6:12 18

91 Satellite radio
Satellite radio operation
You can call the provider service center for
questions or releases, whenever you need.
Press the
Service
soft key.
The Service information display will ap
-
pear.
1Phone number of the provider,

(SIRIUS) or “Call Service Provider”
2The Electronical Serial Number (ESN)
of your satellite receiver

Press the
Back
soft key to switch back
to the Satellite radio main menu.
While receiving a new channel list the mes
-
sage
Updating station list
will appear.
The station last tuned will be muted until
the update is completed. You cannot ope
-
rate the satellite radio.After completion of the update, the

Satellite radio main menu will appear.

The station last tuned to will begin to play.
Refer to chapter “At a glance” on how to
adjust sound settings.
Volume
( page
34)

Balance control and fader
( page
36)

Bass and treble control
( page
37)

Sound functions
( page
37)
Displaying service information
Station list updates
Sound settings
209_MY09_A_US.book Seite 91 Montag, 26. Mai 2008 6:12 18

100 TelephoneTelephone operationInitiating an emergency callIf Telephone is locked
Press the
911
soft key.
The system opens an inquiry menu
prompting if you want to dial a “911”
call.The selection marker in the inquiry
menu should be on
Yes
.

If necessary, push the joystick to
H to select
Yes
.

Press E to confirm
Yes
if you want to
place the “911” emergency call.
The emergency call will be placed.

Wait until the emergency rescue

station answers and describe the
emergency.
If you do not want to place the emergency
call:
Push the joystick to h to select
No
when the inquiry menu appears.

Press E to confirm
No.
If Telephone is ready for operation

Press a repeatedly until the
Telephone menu is displayed.

Press 9, 1 and 1 one after the
other.

Press E.
or
Press the
Send
soft key.
or
Press k.The emergency call will be placed.

Wait until the emergency rescue
station answers and describe the
emergency.
209_MY09_A_US.book Seite 100 Montag, 26. Mai 2008 6:12 18

101 Telephone
Telephone operation
TDMA or CDMA mobile phoneEntering the unlock code
Use the number keys 1 through 0
to enter the four-digit unlock code.Asterisks instead of digits will appear in
the input line.

Press the
OK soft key.
If entered code is correct and the pho
-
ne is registered in a network, the phone
is ready for use and the Telephone
menu will appear.
GSM mobile phoneEntering the unlock code
Use the number keys 1 through 0
to enter the four-digit unlock code.Asterisks instead of digits will appear in
the input line.

Press the
OK soft key.
If entered code is correct and the pho
-
ne is registered in a network, the phone
is ready for use and the Telephone
menu will appear.
Entering codes
iYour unlock code prevents unauthori
-
zed persons from using your telephone.
B e s u re t o m em o ri z e t hi s c o d e , a f o u r d i
-
git number, carefully.If you enter an incorrect code, the sys
-
tem returns to the menu for entering the
unlock code.iYou must always enter the unlock code
when you switch on the telephone the
first time (if phone is in locked mode).
209_MY09_A_US.book Seite 101 Montag, 26. Mai 2008 6:12 18

103 Telephone
Telephone operation
The system detects an incoming call, the
phone rings.Incoming calls are indicated in a window in
any system (e.g. radio).The window shows:
the caller’s number if it is transmitted
or

the caller’s name if her or his name and
number are saved in the phone book or

Unknown
.
Accepting a call 
Press k.
or
Press E to confirm
accept
.
The display will change to the
call
menu
( page
108)
. In the status
bar, the off-hook symbol will appear.
An active audio source will be muted.
You talk over the hands-free set.
Rejecting a call 
Press K.
or
Push the joystick to H to highlight
re-
ject
and than press E.
Setting the volume for hands-free ope
-
rationRaising the volume
Turn the rotary control on the e but
-
ton to the right.
Lowering the volume
Turn the rotary control on the e but
-
ton to the left.
Ending a call 
Press K.
or
Press the
End
soft key.
Incoming call
209_MY09_A_US.book Seite 103 Montag, 26. Mai 2008 6:12 18

104 TelephoneTelephone operationYou can use the following functions to
make a phone call:
Dialing a telephone number ( page
104)

Redial
( page
105)

Selecting an entry from the Received
calls list
( page
106)

Selecting an entry from the Dialed
numbers list
( page
106)

Use speed-dialing
( page
108)

Use quick-dialing
( page
108)

Selecting a phone book entry and
dialing the number
( page
112)
Dialing a telephone number Entering a telephone number
Open the Telephone menu ( page
102)
.

Use the number keys 1 - 0 to enter
the telephone number.
Deleting the last or several digits:
Press the
Delete
soft key once or seve
-
ral times.
Deleting all digits:
Press K.
or
Press and hold
Delete
soft key for more
than 2 seconds.
Outgoing calls
209_MY09_A_US.book Seite 104 Montag, 26. Mai 2008 6:12 18

105 Telephone
Telephone operation
Begin dialingWhen you have entered the telephone
number
Press E.
or
Press k.
or
In the Telephone menu, press the
Send

soft key.
Dialing will begin. If a name is associated
with the phone number saved in the phone
book, the name appears on the screen. In
the status bar, the off-hook symbol will ap
-
pear.COMAND will mute an active audio source.
If the person called answers the call, the
call is active. You talk over the hands-free
set.The message
Call failed
may

appear if you place an outgoing call.

Try again later.Subsequent dialingTransmitting other dial tones:
During a call you can press the number
keys 1 through 0, # and *.
Ending a call 
Press K.
or
Press the
End
soft key.
Redial 
Press k.
or
Press the
Dialed#
soft key.
The Dialed numbers list will appear.
The most recently dialed number is
highlighted.

Push the joystick g or G to select
the desired entry.
To dial the selected number:
Press E.
or
Press k.
or
Press the
Send
soft key.
209_MY09_A_US.book Seite 105 Montag, 26. Mai 2008 6:12 18

106 TelephoneTelephone operationSelecting an entry from the Received
calls listThe COMAND automatically generates a
list of the last 10 calls received. The list is
sorted chronologically with the most
recently received call at the top of the list.Displaying the list
In the Telephone menu
( page
102)
,
press the
Recvd#
soft key.
The list is displayed and the most
recently received call is highlighted.
Received calls listThe status bar shows:
the caller’s name if her or his name and
number are stored in the phone book

the message
Unknown
if no entry is
available

the telephone number
You can select the following functions:
Changing the list display

Selecting an entry and begin dialing

Ending a call
( page
105)
Changing the list display 
Press the
123
soft key.
The display changes to numbers.
or
Press the
ABC
soft key.
The display changes to names.
Selecting an entry and begin dialing
Push the joystick to g or G to
select the desired entry.

Press E.
or
Press k.
or
Press the
Send
soft key.
The telephone dials the number.
209_MY09_A_US.book Seite 106 Montag, 26. Mai 2008 6:12 18

107 Telephone
Telephone operation
Selecting an entry from the Dialed num
-
bers listThe COMAND automatically generates a
list of the last 10 numbers dialed. The list
is sorted chronologically with the most
recently dialed number at the top of the
list.Displaying the list
In the Telephone menu
( page
102)
,
press the
Dialed#
soft key.
The list is displayed and the most
recently dialed number is highlighted.
Dialed numbers listThe status bar shows:
the caller’s name if her or his name and
number are stored in the phone book

the message
Unknown
if no entry is
available

the telephone number
You can select the following functions:
Changing the list display
( page
106)

Selecting an entry and begin dialing ( page
106)

Ending a call
( page
105)
Toggling between lists
Push the joystick to H or h to
select the desired list.
Missed callsIf there are one or more missed calls avai
-
lable on the mobile phone, a correspon
-
ding message will appear.
Press the
Back
soft key or press E to
return to the Telephone menu.
209_MY09_A_US.book Seite 107 Montag, 26. Mai 2008 6:12 18