light MERCEDES-BENZ CLK COUPE 2004 User Guide

28 Getting started
Adj
usting Adjusting the seat
electrically*
The swi tch for adjusting the seat electri-
cally is on the door trim.
6 Turn the key to position 1in the igni-
tion lock ,press the KEYLESS GO but-
ton once or open the appropriate door.
1 Seat fore-and-aft adjustment
2 Seat height
3 Back rest ang le
4 Seat angle
5 Head restraint height Seat fo
re-and -aft adju stment
6 Slide switch 1forwards and back-
wards in the direction of the arrow.
i Make surethatthe re are noitems ofluggage
in the footwell or behind the seats when adj ust-
ing the seats. You could otherwi sedamage the
seats.
Seat height
6 Slide switch 2up or down in the
direction of the arrow.
Backrest angle 6 Slide switch 3forward sor backwards
in the direction of the arrow.
Seat an gle
6 Slide switch 4up or down in the
direction of the arrow until your thighs
are lightly supported. Head restraint
6 Slide sw itch 5 up or down in thedi re c-
tion of the arrow.
6 Adjust the head restraint angle manu-
ally by pulling or pushing the bottom of
the head restraint. P 91.10-2366-31
neu
G
Risk ofinjury Ma
ke sure that the central area of the head
restraint supports the back ofyour head at
abo uteye level.
This will reduce the risk ofinjuryto you r
head and neck inaccide nts or similar
situations. P9
1.16-2132 -31 209en_d2.boo Seite
28Diens tag, 25 .Mai 2004 7:26 19

30 Getting started
Adj
usting Adjus
ting the steeri ngwheel manual ly
The handle is located under the steering
column.
1 Release handle
6 Pullhandle 1to release the steering
column.
6 Adjust the position of the steering
wheel manually.
When doing so, make sure that:
! you can hold the steering wheel
with your arms sli ghtly bent
! your legs can mov efreely
! you can see all displ ays in the
in strument cluster clearly 6
To lock the steering co lumn, push han-
dle 1in fully until you hear it click into
place.
The steering wheel position is locked
again.
Adjusti ngthe steering wheel electrically*
6
Make sure that the ignition isswitched
on.
All the lamps in the instrument cluster
light up.
The lever is on the left under the steering
column.
1 Steering column fore-and-aft adjust-
ment
2 Steering column he ight Steering
column fore-and-aft adjust-
ment
6 Push the lever forwards or backwards
in the direction of arrow 1until your
arms are slightly bent when you are
holding the steering whee l.
Steering column hei ght
6 Push the lever up or do wnin the direc-
tion of arrow 2. When doing so, make
sure that:
! your legs can mo vefreely
! you can see all displays inthe
instrument cluster clearly
You will find further information in the
"Controls indetail" section.
! Easy-entr y/exit feature for the driver
(= page 129)
! Storing the steering wheel position
(=
page 97) P 46.15-2122-31
P 54.25-3801-31209en_d2.boo Seite
30Diens tag, 25 .Mai 2004 7:26 19

31
Getting started
Adjusting
Before starting off, adjust the rear-view
mirror and the exterior mirrors in such a
way that you can get a good overview of
road and traffic conditions. Rear-vie
wmi rror
6 Adjust the rear-view mirror manually. Exterior mirrors
The buttons are located above the parking
brake release handle.
1 Adjustment button
2 Right-hand mirror
3 Left-hand mirror 6
Make sure that the ignition is switched
on.
All the lamps in the instrument cluster
light up.
6 Press button 2for the right-hand
mirror or button 3for the left-hand
mirror.
6 Press up or down, right or left on
adjustment button 1until the mirror
is set correctly.
i The conve xexterior mirror enlarges your
field of vis ion.
The mirrors are heated automatically at low out-
si de temperatures.
You will find further information in the
"Controls in deta il" se ction (
=page 148). Mirrors
G
Risk of accident The
exterior mirrors reduce the size of the
image. The objects are actuallyclo ser than
they appear .You could misjudge the dis-
tance fro mvehicles driving behind and
ca use an accident, e.g. when changing lane.
For this reason, make sure of the actual dis-
tan cefrom the vehicle driving behind by
glanci ngover your shoulder. P88.70-2134-31209en_d2.boo Seite
31Diens tag, 25 .Mai 2004 7:26 19

33
Getting started
Driving
The < seat belt warni ng lamp in the
instrument cluster reminds you to ensure
that all occupants are wearing their seat
belts.
If the driver has not fastened his seat belt,
the < seat belt warning lamp lights up
if the doors are closed and the engine is
running. In addition, an intermitten tsignal
sounds from a speed of 25 km /hupwards.
The intermittent signal ceases:
! as soon as the driver has fastened his
seat belt
! after a maximum of 93 seconds
! when the vehicle is stationary
The < seat belt warning lamp only goes
out once the driver has fastened his seat
belt. !
Children less than 1.50 m tall and
yo un ger than 12 years ofage cannot
wear the seat belts properly. Always
secure these children in suitable child
re straint systems on seats designe dfor
this purpose ( =pag e62). Please follow
the manufacturer's installation instruc-
tions when installing child restraint sys-
tems.
! Do not secure any objects with a seat
belt if it is also being used by one of the
vehicle 'soccupan ts. G
Risk ofinjury The seat belt only prov
ides its intended
degree of protection if the seat backrest is
positioned as close to the vertical as possi-
ble, allowing th eoccupant to sit upright.
Avoid sea tpositions which do not allow the
seat belt to be routed correctly ( =
pag e25).
Therefore, po sition the bac kres ts as close to
the vertical as possible. Never drive with the
backrest inclined too far backwards. G
Risk of injury Airbags are de
signed not to be triggered in
al lac cident situations, since aco rrectly fas-
tened seat belt will often besufficient for
providing an effective degree of protection.
Airbags are not a substitute for seat belts.
To reduce the risk of severe or eve nfatal
in jury, make sure that all occupants – in par-
ticular, pregnant women – always wear their
seat be lts correctly, are seated inan upright
positio nand have their seats positio ned
almost vertic ally ( =
page 25). 209en_d2.boo Seite
33Diens tag, 25 .Mai 2004 7:26 19

37
Getting started
Driving
Diesel engine
6 Turn the key to position 2in the igni-
tion lock.
The q preglow indica torla mp in the
ins trument clus terlights up.
6 As soon as the qpreglow indicator
lamp has gone out, turn the key in the
ignition lock to position 3and release it
as soon as the engine isrunning.
i Ifth e engine is already at operating temper-
ature, you can star tit without preglow. Starting the engine with KEYLESS GO*
You may start your
vehicle with no key in
the ignition lock using the KEYLESS GO
button on the selector lever. Yo
u can start the vehicle with no key in the
ignition lock using the KEYLESS GO button
on the selector lever, as long as the
KE YLE SSGO keyis in the vehicle.
1 KEYLESS GO button Petro
lengine
6 Depress thebr ake pedal.
6 Press KEYLESS GO button 1once.
The engine starts automatically.
Diese lengine
6 Depress thebr ake pedal.
6 Pres s KEYLESS GO button 1once.
The glow plugs are activated and the
engine starts automatically.
If the engine is already at operating tem-
perature, you can start it without preglow:
6 Pres s and hold KEYLESS GO button 1
until the engine is runn ing. G
Risk of accident Your vehicle can be started at any time if the
KEYLESS GO key is inside the vehicle. For
this reason, children should never be left
unsup
ervised in the vehi cle. They cou ldacci-
de ntally start the vehicle.
Ta ke the KEYLESS GO key with you, even if
you are only leaving th evehicle for ashort
time. P 82.00-
2271-31 neu 209en_d2.boo Seite
37Diens tag, 25 .Mai 2004 7:26 19

39
Getting started
Driving
6 Select either first or reverse gear.
6 Slowly release the clutch pedal and
carefully depress the accelerator.
! Change gear in good time. Make sure that
the enginespe eddoes notreach thered area in
the rev cou nter. There is otherwise a danger of
engine dam age.
Do not allow the wheels tospin, ifpossible. You
could otherwise damage the dri vetrain. Automatic
transmission*
i You can only move the selector lever tothe
re quired position by depressing the brake pedal.
Only then isthe selector lever lock disabled.
6 Depress the brake pedal and keep it in
this posi tion.
The selector lever lock is released.
6 Release the parking brake.
6 Move the selector lever to position D
or R.
i Wait for the shi ftprocess to complete
before pulling away.
6 Release the brake pedal.
6 Carefully depress the accelerator
pe dal.
i After a cold start, the automatic transmi s-
sion will shift at a higher engine spe ed. This helps
th e catalytic converter toreach its operati ng
te mperature more quickly. Dipped-
beam headlamps
The light switch is located on the dash-
board between the steering wheel and the
driver's door.
Light switch
1 Lights off
2 Dipped-beam headlamps on G
Risk of accident Do not shift down unle
ss the current driving
sp eed is within the permiss ible range for the
gear to be selected.
Do not change down for additio nal engine
braking ona slippery road surface. The drive
wheels could then lose their grip and the
vehi cle could skid. Youc ould lose control of
the vehicle and cause an acc iden t. Switching on the headlamps
P 82.10-2889-31 neu209en_d2.
boo Seite 39Diens tag, 25 .Mai 2004 7:26 19

40 Getting started
Drivingi
Legal and optional additional requirements
ma y impose variations in certain cou ntries .In
these countri es, the dipped -beam headlamps
are switched on whe nthe ignition isswitched on.
6 Turn the light switch to B.
The dipped-beam headlamps come on.
The fuel tank and coolant temperature
symbols in the ins trument cluster are
lit more bri ghtly.
The B dipped-beam headlamps
symbol in the instrument cluster lights
up. Main-beam he
adlamps
The combination switch is located on the
left of the steering column.
Combination switch
1 Main-beam headlamps
2 Headlamp flasher
6 Press the combination swi tch in the
direction of arrow 1.
The main-beam headlamps come on.
The A main-beam indicator lamp in
the instrument cluster lights up. You will find further
information about
lightin gin the "Controls in detail" section
( = page 100).
The combination switch is located on the
left of the steering column.
Combination switch 1 Right-hand turn signal
2 Left-hand turn signal P 54.25-
3802-31 neu Turn sig
nals P54.25-3803-31 neu209en_d2.
boo Seite 40Diens tag, 25 .Mai 2004 7:26 19

44 Getting started
Parkin
gand lock ing Vehicles with automati
ctransmission*
6 Move the selector lever to P.
With the key 6 Turn the key to position 0in the igni-
tion loc k(
=pag e23)and remove it.
The immobiliser isactivated.
i You can only remove the key when the
selector lever isin position P.
6 Press the release button on the seat
belt (=
page 34).
With KEYLESS GO* 6 Press the KEYLESS GO button on the
selector lever.
The engine isswitched off and all the
lights in the in strument cluster go out.
The on-board electron ics have status 1
( = page 23).
6 Press the release button on the seat
belt (=
page 34). 6
Get out of the vehicle and close the
doors. Locking with the remote contr
ol
6 Press the ‹locking button on the
remote control ( =page 22 ).
The locking knobs in the doors drop
down. The turn signals flash three
time s/light up briefly. Locking with
KEYLESS GO*
1 Locking button on the door handle
6 After getting out ofthe vehicle, press
locking button 1on the door handle.
The locking knobs in the doors drop
down. The turn signals flash three
times.
The immobiliser is act ivated.
i When the door is ope ned,the on-board elec-
tronics have status 0, the sam eas the key having
bee n removed.
You will find further information about
locking in the "Controls in detail" section
( = page 78). Closing
G
Risk of injury Make sure that nobody can become trapped
as you close the doo
rs.
P80.20-2343-31209en_d2.boo Seite
44Diens tag, 25 .Mai 2004 7:26 19

52 Safety
Occupant safetyi
Belt tensioners do not correct:
! inco rrect sitting positions
! incorrectly worn seat belts
Belt tensioners do not pull occ upants back
towar dsthe backrests.
The belt force limiter reduces the belt
force on the occupant when a belt ten-
sioner is activated.
The belt force limiter is fine-tuned to the
front airbag, which takes over from the
seat belt a part of its restraining forces,
thus spreading the forces exerted on the
occupant over a greater area.
The automatic comfort-fit feature on the
front seats reduces the retraction force of
the seat belts.
When the igniti onisswit ched on, the belt
tensioner will be triggered:
! only if the res traint systems are opera-
tional (the 1warning lamp lights up
after the ignition is switched on and
goes out when the engine is running)
( = page 12) !
forea ch lap- shou lder sea tbe lt, pro-
vided the belt tongue is engaged inthe
seat belt buckle
! if a head-on or rear-end col lision occurs
and the veh icle decelerates or acceler-
ates rapidly ina longitudinal direction
during the initial stages ofthe collision
! on the front-passenger side only ifthe
front-passenger seat is occupied and
the belt tongue is engaged in the seat
belt buckle
! in the event of a severe fronta limpact
if the vehicle decelerates rapidly in a
longitudinal direction during the ini tial
stages of the collision
If the be lttensioners are tri ggered, you will
hear a bang that is genera lly harmless to
your hearing. A small amount of dust may
also be released. The 1warning lamp
lights up.
An indication that a belt tensioner in there ar has
been trigger edisthat the seat belt buckle is
pu lled down and is almost flush with the topof
the seat. G
Risk ofinjury The
belt tensioners in the rear only function
correctly ifthe buckl escan be pulled down
unimpeded.
Since this downwards movementmust not
be restricted:
! Do not grasp the buckles.
! Do not pl ace any obj ects un derneath
the buckles.
Ot he rwi se, the action of the belt tensioners
will beimpaired or completely ineffective.
You will then have no additional prot ection. 209en_d2.boo Seite
52Diens tag, 25 .Mai 2004 7:26 19

53
Safety
Occupant safety Ai
rb ag syst em G
Risk ofinjury If the belt tensi
onersha ve bee ntriggered,
have them replaced ata qualified specialist
workshop which has th eneces sary special-
ist knowledge and tools to carry out the
work required. Mercedes -Benz recommends
that you use a Mercedes-Be nzService
Centre for this purpose.
In particular, work rele vant to safety or on
safe ty-re lated systems mustbe carried out
at a qualified spec ialist workshop.
Ob serve the safety regulations for th edis-
posal of belt tensioners. Any Mercedes-B enz
Service Centre can provide detail sof these
regulations. G
Risk of injury To reduce the risk of serious or fata
linjury in
an accident with a high rate of deceleration,
e.g. injuries caused by an airbaginflating
within milliseconds or in the ev ent of abrupt
br aking, please observe the following
inst ructions:
! Allve hicle occupants must select a seat
position in which it is possible to wear
the seat belt correctl ybut which is as far
back from the airba gas possible. The
position of the driver's seat must allow
the driver to drive th evehicle safely. The
driver's arms shou ldbe slightly bent
when holding the steering wheel. The
distance from th edriver's seat to the
pedals must be such that the dr iver can
fully depress the pedals.
! Vehicle occupants should wear their
seat belt correctly at all times and lean
back against the bac krest, which should
be positioned almost vertically. The
head restraint should support the back
of yo urhead at abo uteye level. !
Move the front- passenger seat as far to
the rear as possible, especially if a child
is secured in a restraint system installed
on this sea t.
! Never secure a rearward-facing child
restraint system on the front-pass enger
seat if the front-passenger front airbag
is not deactivate d.In the CLK-Class, the
fr ont-passen ger fro ntairbag is deacti-
vated if a child restraint system with
automatic child seat recognition is
secured to a front-passenger seat and
the AIRBAG OFF lamp is lit. If the auto-
matic child seat rec ognition is defective,
children must be secured in a child
restraint system ins talled on a suitable
re ar seat. If you are using aforward-f ac-
in g child seat on the fro nt-pa ssen ger
seat, the front-passenger seat must be
moved as far to the rear as possibl e. 209en_d2.boo Seite
53Diens tag, 25 .Mai 2004 7:26 19