ignition MERCEDES-BENZ E CLASS 2019 Service Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2019, Model line: E CLASS, Model: MERCEDES-BENZ E CLASS 2019Pages: 530, PDF Size: 19.36 MB
Page 362 of 530
Notes on care ofvehicle parts
\nWARNINGRisk of entrapment ifthewindshield wipers are switched on whilethe windshield is being cleaned
Ifthe windshield wipers are set in motionwhileyou are cleaningthe windshield orwiper blades,you can be trappedbythewiper arm.
Always switch offthe windshield wipersandthe ignition before cleaningthewindshield or wiper blades.
\nWARNINGRisk of burning fromthetail‐pipe ortailpipe trim
Thetailpipe andtailpipe trim can becomeveryhot. Ifyou come into contact withthesecar parts,you could burnyourself.
Always be particularlycareful when inthe vicinity ofthetailpipe andtailpipetrims and supervisechildrenveryclosely when inthis area.
Before any contact, allowthe car partstocool down.
Observethefollowing information:
Notes on cleaning and careAvoidingvehicle damage
Wheels/rimsUsewater and acid-free wheel cleaners.RDo not use acidic wheel cleanerstoremovebrake dust.This could damage wheel bolts and brake components.
RToavoid corrosion ofthe brake discs and brakepads, drivethevehiclefor afew minutes after cleaning before parkingit. The brake discs and brakepadswarmup and dry out.
WindowsCleanthe windowsonthe inside and outside using a dampclothand cleaning agentsrecommendedbyMercedes-Benz.Do not use dry cloths or abrasive or solvent-based cleaningagentstocleanthe inside of windows.
Wiper bladesFold outthe wiper blades and cleanthem using a damp cloth.Do not cleanthe wiper bladestoo often.
360Maintenance and care
Page 370 of 530
Pushthe plug of hose5intoflange6oftire sealant bottle1untilthe plug engages.
Place tire sealant bottle1head downwardsintorecess2ofthe tire inflation compres‐sor.
Removethevalve cap fromvalve7onthedefective tire.
Screwfilling hose8ontovalve7.
Insert plug4into a12V socket inyourvehicle.
Switchthe ignition on.
Press on and off switch3onthe tire infla‐tion compressor.The tire inflation compressor is switched on.The tire is inflated. First, tire sealant is pum‐ped intothe tire. The pressure may brieflyrisetoapproximately 500 kPa (5 bar/73 psi).
Do not switch offthe tire inflation compres‐sor duringthis phase.
Letthe tire inflation compressorrunfor amaximum often minutes.The tire shouldthen haveattained a tirepressure of at least 200 kPa (2.0 bar/29 psi).
If tire sealant leaks out, make sureyou cleantheaffected area asquickly as possible. It is prefera‐bletouse clearwater.
Ifyouget tire sealant onyour clothing, haveitcleaned as soon as possible with perchloroethy‐lene.
If, afterten minutes, a tire pressure of200 kPa (2.0 bar/29 psi) has not been ach‐ieved:
Switch offthe tire inflation compressor.
Unscrewthefilling hose fromthevalve ofthedefective tire.
Please notethat tire sealant may leak out whenunscrewingthefilling hose.
Driveforwards orreverseveryslowlyforapproximately 33ft(10 m).
Pump upthe tire again.After a maximum often minutesthe tirepressure must be at least 200 kPa (2.0 bar/29 psi).
\nWARNINGRisk of accident duetothespecified tire pressure not beingreached
Ifthe specified tire pressure is notreachedafterthe specified time,the tire istoo badlydamaged. The tire sealant cannotrepairthetire inthis instance.
368Breakdown assistance
Page 376 of 530
RAlways make surethat neitheryou northebattery is electrostaticallycharged.
RKeepawayfromfireand openflames.
RDo not leanoverthe battery.
Observethe additionalfollowing points whenchargingthe battery:
ROnly use batterychargerstested andapprovedfor Mercedes-Benz.
RReadthe batterycharger's operating instruc‐tions beforechargingthe battery.
Observethe additionalfollowing points duringstarting assistance:
RStarting assistance may only be providedusing batteries with a nominalvoltage of12V.
RThevehicles must nottouch.
RGasoline engine:Onlyacceptstarting assis‐tance ifthe engine andexhaust system arecold.
Starting assistance andchargingthe12 Vbattery
Requirements:RThevehicle is secured withthe electric park‐ing brake.
RVehicles with automatic transmission:The transmission is in position ].
RThe ignition and all electrical consumers areswitched off.
RThe hood is open.
Slide cover1of positive clamp2onthejump-starting connection point inthe direc‐tion ofthe arrow.
Connect positive clamp2onyourvehicletothe positive pole ofthe donor battery usingthe jumper cable/charging cable. Alwaysbegin with positive clamp2onyourownvehiclefirst.
374Breakdown assistance
Page 380 of 530
Do not activatethe HOLD function.
DeactivateActive Brake Assist (→page174).
Vehicles with automatic transmission:Shiftthe automatic transmissiontoposition \\.
Releasethe electric parking brake.
\nWARNINGRisk of accident duetolimi‐ted safety-related functions duringthetowing process
Safety-related functions are limited or no lon‐geravailable inthefollowing situations:
Rthe ignition is switched off.
Rthe brake system or powersteering sys‐tem is malfunctioning.
Rthe energy supply orthe on-board electri‐cal system is malfunctioning.
Whenyourvehicle isthentowedaway, signif‐icantly more effortmay berequiredtosteerand brakethan is normallyrequired.
Use atow bar.
Make surethatthesteering wheel canmovefreely, beforetowingthevehicleaway.
NOTEDamageduetoexcessive tractivepower
Ifyou pullawaysharply,the tractive powermay betoo high andthevehicles could bedamaged.
Pullawayslowly and smoothly.
Loading thevehiclefor transport
Observethe notes ontowingaway(→page377).
Connectthetow bartothetowingeye inordertoloadthevehicle.
Vehicles with automatic transmission:Shiftthe automatic transmissiontoposition \\.
Vehicles with automatic transmission:The automatic transmission may be locked
in position ]intheevent of damagetotheelectrical system.Toshiftto \\, providetheon-board electrical system with power(→page374).
Loadthevehicle ontothe transporter.
Vehicles with automatic transmission:Shiftthe automatic transmissiontoposition ].
Usethe electric parking braketosecurethevehicle againstrollingaway.
Only securethevehiclebythe wheels.
Vehicles with ADS PLUS (Adaptive DampingSystem PLUS)
\nWARNINGRisk of an accident whentransportingvehicles withAdaptiveDamping System PLUS
Thereduced dampingforces onthevehiclebeing transported can causethevehicle/trailer combinationtostarttoswing.
As aresult, when transportingvehicles withtheAdaptive Damping System PLUS,the
378Breakdown assistance
Page 383 of 530
Blown fuses must bereplaced with fuses ofthesamerating, whichyou canrecognizebythecolor and fuserating. The fuseratings and fur‐ther informationtobe observed are listed inthefuse assignment diagram.
Fuse assignment diagram:onthe fuse box inthe trunk (→page 383).
NOTEDamageor malfunctions causedbymoisture
Moisture may cause damagetothe electricalsystem or cause ittomalfunction.
Whenthe fuse box is open, make surethat no moisture can enterthe fusebox.
When closingthe fuse box, make surethatthe seal ofthe lid is positioned cor‐rectly onthe fuse box.
Ifthe newly inserted fuse also blows, havethecause traced andrectified at aqualified special‐istworkshop.
Ensurethefollowing beforereplacing a fuse:
RThevehicle is secured againstrollingaway
RAll electrical consumers are switched off
RThe ignition is switched off
The electrical fuses are located invarious fuseboxes:
RFuse box inthe engine compartment onthedriver's side (→page 381)
RFuse box onthe driver's side ofthe cockpit(→page 382)
RFuse box inthe front passengerfootwell(→page 382)
RFuse box inthe trunk ontheright-hand sideofthevehicle when viewed inthe direction oftravel (→page 383)
Opening and closingthe fuse box intheengine compartment
Requirements:RA dry clothand a screwdriver areavailable.
Observethe notes on electrical fuses(→page 380).
Opening
\nWARNINGRisk of injuryfrom usingthewindshield wipers whilethe engine hoodis open
Whenthe engine hood is open andthe wind‐shield wipers are set in motion,you can betrappedbythe wiper linkage.
Always switch offthe windshield wipersand ignition before openingthe enginehood.
Breakdown assistance381
Page 392 of 530
The systemchecksthe tire pressure andthe tiretemperature ofthe tires installed onthevehiclebymeans of a tire pressuresensor.
New tire pressure sensors, e.g. in winter tires,are automaticallytaught-in duringthefirst jour‐neytheyare used.
The tire pressure andthe tiretemperatureappear inthe multifunction display(→page 390).
Ifthere is a substantial pressure loss or ifthetiretemperature isexcessive,you will bewarnedinthefollowingways:
Rvia display messages (→page 460)
Rviathe wwarning lamp inthe instrumentcluster (→page 484)
The tire pressuremonitoring system is only anaid. It isthe driver'sresponsibilitytosetthe tirepressuretotherecommended cold tire pressuresuitableforthe operating situation. Setthe tirepressurefor cold tires using a tire pressuregauge.Notethatthe correct tire pressureforthecurrent operating situation mustfirst betaught-intothe tire pressure monitoring system.
In most cases,the tire pressure monitoring sys‐tem will automaticallyupdatethe newreferencevalues afteryou havechangedthe tire pressure.You can, however,also updatethereferenceval‐uesbyrestartingthe tire pressure monitoringsystem manually (→page 391).
System limitations
The system may be impaired or may not functioninthefollowing situations:
RIfthe tire pressure is set incorrectly
RIfthere is a sudden pressure loss caused,forexample,byaforeign object penetratingthetire
RIfthere is a malfunction causedbyanotherradio signal source
Make suretoobservethefollowing furtherrela‐ted subject:
RNotes on tire pressure (→page 386)
Checkingthe tire pressure withthe tire pres‐sure monitoring system
Requirements:RThe ignition is switched on.
On-board computer:
Service Tires
One ofthefollowing displaysappears:
RCurrent tire pressure and tiretemperature ofthe individual wheels:
RTire pressure will be displayed after driving afew minutes
RTire Pressure Monitor Active:theteach-inprocess ofthe system is notyet complete.The tire pressures are already being moni‐tored.
Comparethe tire pressure withtherecom‐mended tire pressureforthe current operat‐
390Wheels and tires
Page 421 of 530
Operatingfluids
Notes on operatingfluids
Mercedes-AMGvehicles:be suretoobservethe information inthe Supplement. Otherwise,you mayfailtorecognize dangers.
\nWARNINGRisk of injuryfrom operatingfluids harmfulto your health
Operatingfluids may be poisonous and harm‐fulto your health.
Observethetext onthe original con‐tainers when using,storing or disposingof operatingfluids.
Alwaysstore operatingfluids sealed intheir original containers.
Alwayskeepchildrenawayfrom operat‐ingfluids.
ENVIRONMENTALNOTEEnvironmentalpollution causedbyenvironmentally irre‐sponsible disposal
Dispose of operatingfluids in an envi‐ronmentallyresponsible manner.
Operatingfluids includethefollowing:
RFuels
RLubricants
RCoolant
RBrakefluid
RWindshieldwasherfluid
RClimate control systemrefrigerant
Only use products approvedbyMercedes-Benz.Damage causedbythe use of productsthat havenot been approved is not coveredbytheMercedes-Benzwarranty or goodwillgestures.
You can identify operatingfluids approvedbyMercedes-Benzbythefollowing inscriptions onthe container:
RMB-Freigabe (e.g. MB-Freigabe 229.51 )
RMB-Approval (e.g. MB-Approval 229.51)
Further information on approved operatingfluidsisavailable atthefollowing locations:
Rinthe Mercedes-Benz SpecificationsforOperating Fluidsbyenteringthe designation
-at http://bevo.mercedes-benz.com
-inthe Mercedes-Benz BeVo App
Rat aqualified specialistworkshop
\nWARNINGRisk offireorexplosion fromfuel
Fuels are highlyflammable.
Fire, openflames, smoking and creationof sparksmust beavoided.
Switchoffthe ignition and, ifavailable,thestationary heater, before and whilerefuelingthevehicle.
\nWARNINGRisk of injuryfrom fuels
Fuels are poisonous and hazardousto yourhealth.
Technical data419
Page 422 of 530
Do not swallow fuel or let it come intocontact withskin,eyes or clothing.
Do not inhale fuelvapor.
Keepchildrenawayfrom fuel.
Keep doors and windowsclosed duringtherefueling process.
Ifyou orother people come into contact withfuel, observethefollowing:
Immediatelyrinse fuel offyour skin withsoap andwater.
If fuel comes into contact withyoureyes, immediatelyrinsethemthor‐oughly with cleanwater.Seek medicalattention immediately.
Ifyou swallow fuel, seek medical atten‐tion immediately.Do not inducevomit‐ing.
Change immediately out of clothingthathas come into contact withfuel.
Fuel
Notes on fuelgradesforvehicles with agas‐oline engineObservethe notes on operatingfluids(→page419).
NOTEDamagecausedbythe wrong fuel
Even small amounts ofthe wrong fuel couldresult in damagetothe fuel system,theengine andthe emission control system.
Onlyrefuel with low-sulfur unleadedfuel.
This fuel may contain upto10%ethanolbyvolume.Yourvehicle is suitablefor use withE10 fuel.
Neverrefuel with one ofthefollowing fuels:
RDiesel
RGasoline with morethan10%ethanolbyvolume, e.g. E15, E85, E100
RGasoline with morethan 3% methanolbyvolume, e.g. M15, M30, M85, M100
RGasoline with additives containing metal
Ifyou haveaccidentallyrefueled withthewrong fuel:
Do not switchonthe ignition.
Consult aqualified specialistworkshop.
Iftheavailable fuel is not sufficiently low in sul‐fur,this can produce unpleasant odors.
Onlyrefuel with fuelthat has at leastthe octanenumber specified inthe instruction label inthefuelfillerflap (→page154).
Ifyouwant maximum engine output:onlyrefuel with unleaded premium gradegasolinewith an octane number of at least91AKI/95RON.
As atemporary measure, iftherecommendedfuel is notavailable,you may alsorefuel withunleadedregulargasoline with at least87AKI/91RON. This mayreduce engine performanceand increase fuel consumption.
Neverrefuel usinggasoline with aneven lowerRON.
420Technical data
Page 431 of 530
Display messagesPossible causes/consequences and P PSolutions
(Canada only)
Turn On the Ignition toRelease the Parking Brake
I
(USA only)
$
(Canada only)
Parking Brake See Opera-tor's Manual
*Theyellow $indicator lamp is lit. The electric parking brake is malfunctioning.
Toapply:
Switch offthe ignition and switch it back on.
Applythe electric parking brake manually (→page164).
If it isnot possibletoapplythe electric parking brake:
Visit aqualified specialistworkshop.
Where necessary,also safeguardthe parkedvehicle againstrollingaway.Theyellow $andthered I(USA only) or $(Canada only) indicator lamps are lit. The electric parkingbrake is malfunctioning.
Torelease:
Switchoffthe ignition and switch it back on.
Releasethe electric parking brake manually (→page164).
or
Releasethe electric parking brake automatically (→page163).If it isstill not possibletoreleasethe electric parking brake:
Do not continue driving under any circumstances. Consult aqualified specialistworkshop.
Display messages andwarning/indicator lamps429
Page 432 of 530
Display messagesPossible causes/consequences and P PSolutions
Theyellow $indicator lamp is lit andthered I(USA only) or $(Canada only) indicator lamp isflashing.The electric parking brake is malfunctioning.
The electric parking brake could not be applied orreleased.
Switchoffthe ignition and switch it back on.
Toapply:
Release andthen applythe electric parking brake manually (→page164).
Torelease:
Apply andthenreleasethe electric parking brake manually.
Ifthe electric parking brake cannotbe applied orthered I(USA only) or $(Canada only) indicator lampcontinuestoflash:
Do not continue driving under any circumstances. Consult aqualified specialistworkshop.
Where necessary,also safeguardthe parkedvehicle againstrollingaway.Theyellow $indicator lamp is on andthered Iindicator lamp (USA only) orthe $indicator lamp (Can‐ada only)flashesfor approximatelyten seconds afterthe electric parking brake has been applied orreleased. Itthenremains lit or goes out. The electric parking brake is malfunctioning.
Ifthe batterychargelevel istoo low:
Chargethe battery.
Toapply:
430Display messages andwarning/indicator lamps