display MERCEDES-BENZ E-CLASS CABRIOLET 2018 User Guide

Function of thePA SSENGER AIR BAG indica‐
to r lamps
Sy stem self-te st
When the ignition is switched on, a sy stem self-
te st is per form ed during which the two
PA SSENGER AIR BAG ON and OFF indicator
lamps light up simultaneousl y.The
status of the front passenger air bag is dis‐
pla yed af terth e sy stem self-tes t:
RPASSENGER AIR BAG ON lights up for
60 seconds, subsequently bo thPASSENGER
AIR BAG ON and OFF indicator lamps are off:
th e front passenger air bag is able todeploy
in theeve nt of an accident.
RPASSENGER AIR BAG OFF lights up continu‐
ously: the front passenger air bag is deactiva‐
te d. It will then not be deplo yed in theeve nt
of an accident.
If th ePA SSENGER AIR BAG ON indicator lamp is
off, only thePA SSENGER AIR BAG OFF indicator
lamp sho wsthest atus of the front passenger air
bag. The PASSENGER AIR BAG OFF indicator
lamp may be lit continuously or be off.
If th ePA SSENGER AIR BAG OFF indicator lamp
and the0075 restra int sy stem warning lamp
light up simultaneousl y,the front passenger seat
may not be used. Also in this case, do not ins tall
a ch ild restra int sy stem on the front passenger
seat. Ha vethe automatic front passenger air bag
shutoff checked and repaired immediately at a
qu alified specialist workshop. St
atus display
If th e front passenger seat is occupied, ensure,
bo th before and durin
g
the journe y,that thest a‐
tus of the front passenger air bag is cor rect for
th e pr evailing situation.
Af ter in stalling a rear wa rd-facing child
re stra int sy stem tothe front passenger
seat: PASSENGER AIR BAG OFF must be lit con‐
tinuousl y.
0071
WARNING Risk of injury or death from
using a rear wa rd-facing child restra int
sy stem when the front passenger air bag
is enabled
If yo u secure a child in a rear wa rd-facing
ch ild restra int sy stem on the front passenger
seat and thePA SSENGER AIR BAG OFF indi‐
cator lamp is off, the front passenger air bag
can deploy in theev ent of an accident.
The child could be stru ck bythe air bag.
Alw ays ensure that the front passenger air
bag is disabled. The PASSENGER AIR BAG
OFF indicator lamp must be lit.
Occupant saf ety 43

00BBAfterre moving thech ild seat, replace each
co verfo rLA TC H-type (ISOFIX) mounting
brac kets 1.
Secu ring TopTe ther
0071
WARNING Risk of injury or death ifthe
re ar seat backrests are not loc ked af ter
ins talling TopTe ther belts
If th ere ar seat backrests are not loc ked, they
could fold forw ards in theeve nt of an acci‐
dent or du ring braking or sudden changes of
direction.
As a result, child restra int sy stems cannot
per form their intended pr otective function.
Re ar seat backrests that are not loc ked can
also cause additional injuries, e.g. in the
ev ent of an accident.
00BBAlw ays lock rear seat backrests af ter
ins talling TopTe ther belts.
00BBObser vethe lock verification indicator.
If th e seat backrest is not engaged and loc ked,
th is will be shown on the multifunction display
on the instrument clus ter.
The risk of injury can be reduced byTopTe ther
as TopTe ther pr ovides an additional connection
between thech ild restra int sy stem secured with
LA TC H-type (ISOFIX) and theve hicle.
The child restra int sy stem must be equipped
with a TopTe ther belt.00BBIns tallth eLA TC H-type (ISOFIX) child restra int
sy stem with TopTe ther on there ar seat.
Alw ays comply with thech ild restra int sys‐
te m manufacturer's ins tallation instructions
when doing so.
00BBFo ldthere ar seat backrest forw ards
(→page 101).
00BBHook TopTe ther hook 2into TopTe ther
anchorage 1.
00BBFoldthere ar seat backrest back
(→page 102).
00BBMake sure that TopTe ther belt 3is not
twis ted and there ar seat backrest is loc ked.
Occupant saf ety 53

0075NO
TEDama getothe soft top caused by
heavy objects
Heavy objects placed on the soft- top com‐
partment co ver can dama gethe soft top or
soft- top compartment co ver.
00BBDo not place heav yobjects on the soft-
to p compartment co ver.
00BBDo not sit on the soft- top compartment
co ver.
Fo r saf etyre asons, Mercedes-Benz recommends
opening or closing the soft top when theve hicle
is stationar y.
Do not exceed a maximum speed of 30 mph
(50 km/h) when driving (max. 35 mph
(60 km/h) to avoid inter rupting the closing proc‐
ess in theeve nt of slight excess speed).
00BBMake sure that the trunk separator is closed.
00BBClose the trunk lid.
00BBSwitch on the ignition.
00BBKe ep the brake pedal depressed when the
ve hicle is stationar y.
00BBToopen: pull and hold soft- top switch 1
until the soft top is fully opened.
The multifunction display sho wsthe opening
process of the soft top.
00BBTo close: press and hold soft- top switch 1
until the soft top is fully closed.
The multifunction display sho wsthe closing
process of the soft top.
0071
WARNING Risk of accident due to too
high speed during the soft- top opening
or closing procedure
If th eve hicle speed exceeds 35 mph
(60 km/h) the soft topstops during the
opening or closing procedure.
This impairs your view tothere ar.
00BBRe duce theve hicle speed tobelow
35 mph(6 0 km/h) or stop theve hicle,
paying attention toroad and traf fic con‐
ditions.
00BBOpe rate the soft- top switch again in
order toopen or close the soft top full y.
The cur rent procedu reisstopped at a speed
abo ve35 mph(6 0 km/h). The 2SHQ&ORVH &RQ
YHUWLEOH 7RS &RPSOHWHO\ messageis shown on
th e multifunction displa y.
00BBReduce your speed and press or pull soft- top
switch 1again.
If th e soft top does not close fully because of
stro ng headwinds, drive slowe r orstop.
Opening and closing 77

00BBSelect a massageprogram.
The massage program runs for app roxima tely
9 to 22 minutes, depending on the setting.
00BBTo set the massage intensity: switch +LJK
,QWHQVLW\ on0073 or off 0053.
Resetting seat and massa gesettings
Multimedia sy stem:
00869HKLFOH00CFa 6HDWV00CF5HVHW
00BBSelect <HVor1R.
Depending on whe ther the settings forth e driver
or front passenger seat are selected, only the
selected seat can be reset.
Fo lding the front seat backrest forw ards/
back (vehicles wi th memoryfunction)
With th e EASY-ENTRY function, the seat mo ves
fo rw ards if you ha vefolded the seat backrest
fo rw ards. This makes it easier for passengers to
ge t into and out of there ar of theve hicle.
00BBTo fold forw ards: pull seat release handle
1 and fold the seat backrest forw ards as far
as it will go.
The seat mo ves automatically tothefo re ‐
most position.
00BBTo fold back: swing back the seat backrest
horizon tally.
If th e seat backrest is not engaged, this will
be shown on the multifunction display of the
instrument clus ter.A wa rning tone also
sounds.
The seat mo ves automatically tothestored
position.
If th e pr evious seat position can no longer be
set, e.g. because of luggage in there ar foot we ll
or af ter occupants ha veentered there ar of the
ve hicle:
00BBPull seat release handle 1again and return
th e seat backrest toan upright position.
The seat loc ksinthe new fore -and-aft adjust‐
ment position.
Switching the seat heating on/o ff
0071
WARNING Risk of burn s duetorepeat‐
edly switching on the seat heater
Re peatedly switching on the seat heater can
cause the seat cushion and seat backrest
padding tobecome very hot.
The health of persons with limited temp era‐
ture sensitivity or a limited ability toreact to
exc essively high temp eratures may be af fec‐
te d or they may even suf fer burn-like injuries.
92
Seats and stowing

RSteering wheel
ROutside mir rors
RHead-up Display
00BBSet the seat, thesteering wheel, the head-up
display and the outside mir rorto the desired
position.
00BBPress memory button M toge ther with one of
th e memory position switches 1,2 or 3.
An acou stic signal sounds. The settings are
st ored.
00BBTo call up: press and hold there leva nt pre‐
set position button 1,2 or 3 until the front
seat, thesteering wheel, Head-up Display
and outside mir ror is in thestored position.
St ow age areas
Note s on loading theve hicle
0071
WARNING Risk ofexhaust gas poisoning
Combustion engines emit poisonous exhaust
ga ses such as carbon monoxide. Exhaust
ga ses can enter theve hicle interior if the
trunk lid is open when the engine is running,
especially if theve hicle is in motion.
00BBAlw ays switch off the engine before
opening the trunk lid.
00BBNe ver drive with the trunk lid open.
0071
WARNING Risk of injury from unsecured
items in theve hicle
If objects, luggage or loads are not secured
or not secured suf ficientl y,they could slip,
tip ove r or be throw n around and thereby hit
ve hicle occupants.
There is a risk of injur y,particularly in the
ev ent of sudden braking or a sudden change
in direction.
00BBAlw aysstow objects in such a wayth at
th ey cannot be thro wn around.
00BBBefore the journe y,secure objects, lug‐
ga ge or loads against slipping or tipping
ove r.
0071
WARNING Risk of injury from incorrectly
stowe d objects
If objects in theve hicle interior are stowed
incor rectly, they can slide or be throw n
around and hit vehicle occupants. In addi‐
tion, cup holders, open stowage spaces and
mobile phone brac kets cann otalw aysre tain
all objects they contain.
Seats and stowing 99

00BBPull button1.
00BBFoldthe cor responding seat backrest for‐
wa rds. Fo
lding there ar seat backrest back
0075 NO
TEDama getothe seat belt
The seat belt could become trapped and thus
damaged when folding back the seat back‐
re st.
00BBMake sure that the seat belt is not trap‐
ped when folding back the seat back‐
re st.
00BBMo vethe driver's or front passenger seat for‐
wa rds, if necessar y.
00BBFold cor responding seat backrest 1back
until it engages.
If th e seat backrest is not engaged and
loc ked, this will be shown in the multifunc‐
tion display in the instrument clus ter.
Overview of the tie-down eyes
Obser vethe no tes on loading theve hicle
(→page 99).
10 2
Seats and stowing

00BBPlacethe mobile phone as close tothe cen‐
te r of mat 1as possible with the display
fa cing up wards.
When thech arging symbol is shown in the
multimedia sy stem, the mobile phone is
being charge d.
Malfunctions during thech arging process are
shown in the multimedia sy stem displa y.
00CE The mat can be remo vedfo r cleaning, e.g.
using clean, luk ewarmwate r.
Installing or removing the floor mats
0071
WARNING Risk of accident due to
objects in the driver's foot we ll
Objects in the driver's foot we ll may impede
pedal tr avel or block a depressed pedal.
This jeopardizes the operating and road
saf etyof theve hicle.
00BBStow all objects in theve hicle securely
so that they cannot getinto the driver's
fo ot we ll.
00BBAlw ays ins tallth efloor mats securely
and as prescribed in order toensure
th at there is alw ays suf ficient room for
th e pedals.
00BBDo not use loose floor mats and do not
place floor mats on top of one ano ther.00BBTo install: pressstud 1 into holder 2.
00BBToremo ve:pull thefloor mat off the holders
2.
11 0
Seats and stowing

High beam switches off automatically:
RAt speeds below 16mp h (25 km/h).
RIfot her road users are de tected.
RIfstre et lighting is suf ficient.
At speeds abo veappr ox.31 mp h (50 km/h):
RThe headlamp range of low beam is regulated
automatically based on the dis tance to ot her
ro ad users.
The sy stem's optical sensor is located behind
th e windshield near theove rhead control panel.
Switching Adaptive Highbeam Assist on/off
00BBTo switch on: turnthe light switch to
th e0058 position.
00BBSwitch on the high beam using the combina‐
tion switch.
When the high beam is switched on automat‐
ically in the dar k,the00CE indicator lamp in
th e multifunction display comes on.
00BBTo switch off: switch offthe high beam
using the combination switch.
Switching the daytime running lights on/off
Multimedia sy stem:
00869HKLFOH00CF÷ /LJKW 6HWWLQJV00CF'D\
WLPH 5XQ /LJKWV
00BBAc tivate 0073or deacti vate 0053 the function.
Setting theex terior lighting switch-off delay
time
Multimedia sy stem:
00869HKLFOH00CF÷ /LJKW 6HWWLQJV00CF([W
/LJKW 'HO 6Z RII
00BBSet the switch-off delay time.
Setting the sur round lighting
Multimedia sy stem:
00869HKLFOH00CF÷ /LJKW 6HWWLQJV00CF/RFD
WRU /LJKWLQJ
00BBSwitch the function on 0073or off 0053.
If th e sur round lighting is switched on, theex te‐
ri or lighting remains lit for 40 seconds af terth e ve
hicle is unloc ked. When youstart theve hicle,
th e sur round lighting is switched off and auto‐
matic driving lights are activated.
Interior lighting
Ad justing the in terior lighting
00BB1 0042 Switches there ar interior lighting
on/off
00BB2 003D Switches the front right-hand read‐
ing lamp on/off
00BB3 0033 Switches the automatic interior
lighting control on/off
Light and visibility 11
5

00BBHoldthe wiper arm with one hand. With th e
ot her hand, turn the wiper blade in the direc‐
tion of ar row1away from the wiper arm to
th estop.
00BBSlide catch 2inthe direction of ar row 3
until it engages in there mo val position.
00BBRe mo vethe wiper blade in the direction of
ar row 4away from the wiper arm. Fi
tting the wiper blades
00BBInsert the new wiper blade into the wiper
arm in the direction of ar row1.
00BBSlide catch 2inthe direction of ar row 3
until it engages in the locking position.
00BBMake sure that the wiper blade sits cor rectly.
00BBFo ldthe wiper arms back onto the wind‐
shield. Maintenance display
The maintenance display is only
available for
st andard windshield wipers.
00BBRe mo veprotective film 1 ofthe mainte‐
nance display on the tip of the newly ins tal‐
led wiper blades.
11 8
Light and visibility

Ifth e color of the maintenance display changes
from black to yellow, the wiper blades should be
re placed.
00CE The duration of the color change varies
depending on the usage conditions.
Re placing the windshield wiper blades
(MAGIC VISION CONTROL)
0071 WARNING Risk of becoming trapped if
th e windshield wipers are switched on
while wiper blades are being replaced
If th e windshield wipers begin tomo vewhile
yo u are changing the wiper blades, you can
be trapped bythe wiper arm.
00BBAlw ays switch off the windshield wipers
and the ignition before changing the
wiper blades.
Moving the wiper arms toave rtical position
00BBSwit chon the po wer supp ly.
00BBSet the windshield wiper tothe00AA slow
continuous wiping position on the combina‐
tion switch.
00BBAs soon as the wiper arms are vertical rela‐
tive tothe hood, switch off the po wer supply.
Re moving the wiper blades
00BBTo bring the wiper blade into position to
be remo ved: raise the wiper arm away from
the windshield and hold it with one hand.
Wi th th eot her hand, turn the wiper blade in
th e direction of ar row1beyond the point of
re sis tance.
The wiper blade engages in there mo val posi‐
tion with a clic k.
00BBToremo vethe wiper blade: pressrelease
knob 2, pull the wiper blade in the direction
of ar row3and remo ve.
Light and visibility 11
9