display MERCEDES-BENZ E-CLASS ESTATE 2021 User Guide

Seat belt adjus
Seat belt adjustment function
tment function V
V
ehicles wit
ehicles wit h PRE-S
h PRE-SAFE
AFE®
®
:
:aTer a front seat belt
has been fastened, the automatic seat belt adjust-
ment may apply a cer tain tightening forc e. Do not
hold the seat belt tightly while it is adjusting.
Yo u can activate and deactivate the seat belt
adjustment function using the multimedia system
(/ page 49). A
A
ctiv
ctiv ating/deactiv
ating/deactiv ating seat belt adjus
ating seat belt adjustment via tment via
t
t he multimedia syst
he multimedia syst em
em Multimedia system:
4 © 5
Settings 5
Vehicle #
Activate or deactivate Belt adjustment.R
R
eleasing seat belts
eleasing seat belts #
Press there lease button in the seat belt
buckle and guide the seat belt back with the
seat belt tongue. Seat belt w
Seat belt w
ar
arning function f
ning function f or t
or the dr
he dr iv
iver and fr
er and fr ont
ont
passeng
passeng er
er The
ü seat belt warning lamp in the Instru-
ment Display is a reminder that all vehicle occu-
pants must weartheir seat belts cor rectl y.
In addition, a warning tone may sound.
As soon as the driver and front passenger fasten
th eir seat belts, the seat belt warning goes out. F
F
unction of t
unction of t he r
he r ear seat belt st
ear seat belt st atus display
atus display The
rear seat belt status displ ayis only available
fo r cer tain countries. When
theve hicle is switched on, there ar seat
belt status displ ayinforms youfo r a cer tain
amount of time which rear seat belt is not fas-
te ned.
Yo u can immediately dismiss there ar seat belt
status displ ayusing the back button on the leT-
hand side of the steering wheel (/ page 298).
If a vehicle occupant unfastens a seat belt in the
re ar while theve hicle is motion, there ar seat belt
status displ ayappears again.
In addition, a warning tone may sound. In this
case, there ar seat belt status displ aycann otbe
hidden using the back button on the leT-hand side
of the steering wheel. Occupant saf
ety
49
49

Alw
ays obser vethe no tes on the function of the
PA SSENGER AIR BAG indicator la mps
( / page 54).
F
F unction of t
unction of t he P
he PASSEN
ASSEN GER AIR BA
GER AIR BAG indicat
G indicat or
or
lam
lam ps
ps Ve
hicles without automatic front passen ger airbag
shuto. ha vea special stic ker a1xed tothe side of th
e cockpit on the front passenger side
(/ page 73).
Self-t
Self-t es
est of autt of aut omatic fr
omatic fr ont passeng
ont passeng er airbag shut-
er airbag shut-
o.
o. When theve hicle is switched on, a self-test is per-
fo rm ed during which the two PASSENGER AIR
BAG ON and OFF indicator la mps light up simul ta-
neous ly.
The status of the front passenger airbag is dis-
pla yed via thePA SSENGER AIR BAG indicator
la mp s aTer the self-test:
R ON is lit:
ON is lit: the front passenger airbag may
deploy during an accident.
The indicator lamp goes out aTer 60 seconds.
R ON and OFF ar ON and OFF ar e no
e not lit:
t lit: the front passenger
airbag may deploy during an accident.
R OFF is lit:
OFF is lit: the front passenger airbag is disa-
bled. It will then not be deplo yed in theev ent
of an accident.
If th ePA SSENGER AIR BAG ON indicator la mpis
o., only thePA SSENGER AIR BAG OFF indicator
la mp shows th e status of the front passenger air- bag. The
PASSENGER AIR BAG OFF indicator la mp
may be lit continuously or be o..
If th ePA SSENGER AIR BAG OFF indicator la mp
and the6 restraint system warning lamp light
up simultaneousl y,the front passenger seat may
not be used. Also in this case, do not /t a child
re straint system tothe front passenger seat. Ha ve
th e automatic front passenger airbag shuto.
ch ecked and repaired immediately at a quali/ed
specialist workshop.
S
S t tatus display
atus display
If th e front passenger seat is occupied, ensure,
bo th before and during the journe y,that the sta-
tus of the front passenger airbag is cor rect forthe
cur rent situation.
ATer
ATer /tting
/tting a r
a rearw
earw ar
ard-f
d-f acing c
acing c hild r
hild res
estrtraint sy
aint sy s-
s-
t
t em t
em t o t
o the fr
he fr ont passeng
ont passeng er seat
er seat::PA SSENGER AIR
BAG OFF must be lit continuous ly.54
54
Occupant saf
ety

impact is anticipated. This increases
the distance
between the door and theve hicle occupant.
If PRE-SAFE ®
Impulse Side has been depl oyed or
is faulty, thePRE-SAFE impulse side inoperative
See Owner's Manual(/ page 450) display mes-
sage appears. Saf
Saf
el
ely tr
y tr anspor
anspor ting c
ting childr
hildren in t
en in t he v
he vehicle
ehicle Alw
ay
Alw ays observ
s observ e when c
e when c hildr
hildren ar
en ar e trav
e tr avelling in telling in t he
he
v
v ehicle
ehicle %
Also strictly obser vethe saf ety no tesfo rthe
speci/c situation. In this wa yyo u can recog-
nise po tential risks and avoid dangers if chil-
dren are tr avelling in theve hicle
(/ page 59).
Be dilig
Be dilig ent
ent
Bear in mind that negligence when securing a
ch ild in thech ild restraint system ma y haveseri-
ous conse quences. Alw ays be dili gent in securing
a ch ild carefully before every journe y.
Ne ver allow babies and children totrave l sitting
on the lap of ano ther vehicle occupant. To
impr oveprotection forch ildren younger than
12 years old or under 1.50 m in height,
Mercedes-Benz recommends you obser vethefo l-
lowing information:
R Always secure thech ild in a child restraint sys-
te m suitable forth is Mercedes-Benz vehicle.
R The child restraint system must be appropria te
to the age, weight and size of thech ild.
R The vehicle seat must be suitable for /tting a
ch ild restraint system (/ page 62).
Ac cident statistics show that children secured on
th ere ar seats are generally sa ferth an children
secured on the front seats. Forth is reason,
Mercedes-Benz st rongly advises that you /t a
ch ild restraint system toare ar seat.
The g The g ener
eneric t
ic ter
erm c
m c hild r
hild r es
estr
traint syst
aint syst em
em
The generic term child restraint system is used in
th is Owner's Manual. A child restraint system is,
fo rex ample:
R a baby car seat
R are ar wa rd-facing child seat
R afo rw ard-facing child seat R
ach ild booster seat with a backrest and seat
belt guide
Mercedes-Benz recommends using a child
booster seat with a backrest.
The child restraint system must be appropria te to
th e age, weight and size of thech ild.
Observ Observ e law
e laws and leg
s and leg al r
al r eq
equir
uir ements
ements
Alw ays obser vethe legal requ irements when
using a child restraint system in theve hicle.
Make sure that thech ild restraint system is
appro ved in accordance with theva lid test speci/-
ca tions and guidelines. Further information can
be obtained at a quali/ed specialist workshop.
Mercedes-Benz recommends that you use a
Mercedes-Benz Service Centre forth is purpose.
Onl
Onl y use appr ov
y use appr oved c
ed c hild r
hild r es
estrtraint syst
aint syst ems
ems
Only child restraint systems that meet thefo llo w-
ing UNECE standards are permitted for use in the
ve hicle:
R UN-R44
R UN-R129 (i-Size child restraint systems) 58
58
Occupant sa
fety

Size class –
Size class –
Eq Eq
uipment
uipment LeT/r
LeT/r
ight
ightr
rear seat
ear seat
B1 – ISO/F2X IUF
A – ISO/F3 IUF IL Suitable for ISOFIX child restraint systems acco rding totheta ble
in "Overview of there commended child restraint systems", or if the
ve hicle and the seat are listed on thech ild restraint system manu-
fa cturer's vehicle model list.
IUF Suitable forfo rw ard-facing ISOFIX child restraint systems of the
"Universal" category in this we ight group.
(1) When using a child restraint system of size class (ISO/R3),
mo vethe front seat into the highest position. Make sure thatth e
seat backrest of the front seat does not rest against thech ild
re straint system. Ov Ov
er
ervie
vie w of suit
w of suit ability of t
ability of t he seats f
he seats f or att
or attac
aching
hing
i‑Size c
i‑Size c hild r
hild res
estrtraint syst
aint syst ems
ems
i‑Size is a standardised securing system for spe-
cially designed child restraint systems.
° The symbol indicates seats suitable for
attaching an i‑Size child restraint system in
acco rdance with UN R129 (/ page 63).
Child restraint systems that are permitted
in accordance with UN R44 as per the ISO-
FIX tables (/ page 65) or UN R129 as per
th efo llowing i‑Size tables may be attached.
i‑Size c
i‑Size c hild r
hild res
estrtraint syst
aint syst ems (ISO/R2, ISO/F2X)
ems (ISO/R2, ISO/F2X) F
F
r
ront passeng
ont passeng er seat
er seatLeT/r
LeT/r ight
ightr
rear seat
ear seat
Xi ‑U
X Not suitable for an i-Size child
re straint system in the "Univer-
sal" categor y. i-U Suitable
forfo rw ard-facing
and rear wa rd-facing i-Size child
re straint systems in the "Univer-
sal" categor y. F
F
itting t
itting t he ISOFIX or i‑Size c
he ISOFIX or i‑Size c hild r
hild res
estrtraint syst
aint syst em
em
on t
on t he
heleT
leT and r
and r ight r
ight r ear seats
ear seats &
W
WARNING
ARNING Risk of accident if there ar
ben chseat, rear seat and seat backrest
are not engaged
The rear ben chseat, rear seat and seat bac k-
re st ma yfo ld forw ards, even while theve hicle
is in motion.
R As a result, theve hicle occupant will be
pressed into the seat belt with increased
fo rc e. The seat belt will not be able topro-
te ct as intended and could cause addi-
tional injur y.
R Objects or loads in the boot or load com-
partment cannot be restrained bythe seat
backrest. #
Make sure that there ar ben chseat, the
re ar seat and the seat backrest are
engaged before every trip. If
th e leT and right seat backrests are not
engaged and loc ked in place, this will be shown
on the display on the inst rument clus ter. 66
66
Occupant saf
ety

*
N
N O
OTE
TE Damage tothe seat belt forthe
cent reseat during ins tallation of thech ild
re straint system #
Makesure that the seat belt is not trap-
ped. #
Remo veand st ow aw aycovers 1 or2. #
Attach the ISOFIX or i‑Size child restraint sys-
te m to both mounting brac kets in theve hicle. #
ATer removing thech ild seat, reattach co vers
1 or2. F
F
ast
ast ening a T
ening a T opTet
op Tether
her &
W
W ARNING
ARNING Risk of injury or death if the
re ar seat backrests are not loc ked aTer
To pTe ther belts are /t ted
The rear seat backrests may fold forw ards
when you are driving.
As a result, child restraint systems will no lon-
ge r be able toper form their intended pr otec-
tive function. This may also cause additional
injuries. #
Always lock rear seat backrests aTer /t-
ting TopTe ther belts. #
Obser vethe lock veri/cation indicator. If
th e leT and right seat backrests are not
engaged and loc ked in place, this will be shown
on the display on the inst rument cluster.
If th e centre seat backrest is not engaged and
loc ked in place, there d lock veri/cation indicator
will be visible.
¯ Ifth ech ild restraint system is equipped
wi th aTo pTe ther belt:
The risk of injury may be reduced byTo p
Te ther. The TopTe ther belt enables an
additional connection between thech ild
re straint system at tach ed with ISOFIX or
i‑Size and theve hicle. Occupant saf
ety
69 69

Fr
ont passenger airbag disabled 1, 2
U, L
1 Ad just the seat cushion inclination so that the front
edge of the seat cushion is in the highest position and
th ere ar edge of the seat cushion is in thelowe st posi-
tion.
2 The vehicle is equipped with automatic front
passenger airbag shuto.. The PASSENGER AIR BAG
OFF indica tor lamp must be lit.
X Not suitable forch ildren in thisweight categor y.
U Sui table forch ild restraint systems of the "Universal"
category in this we ight categor y.
L Suitable for semi-universal child restraint systems
acco rding totheta ble in "Recommended child restraint
systems", or if theve hicle and the seat are listed in the
ch ild restraint system manufacturer's vehicle model list.
UF Suitable forfo rw ard-facing child restraint systems of
th e "Universal" category in this we ight categor y. Secur
Secur
ing t
ing the c
he child r
hild r es
estrtraint syst
aint syst em wit
em with t
h the seat
he seat
belt on t
belt on t he r
he rear seat
ear seat &
W
WARNING
ARNING Risk of accident if there ar
ben chseat, rear seat and seat backrest
are not engaged
The rear ben chseat, rear seat and seat bac k-
re st ma yfo ld forw ards, even while theve hicle
is in motion.
R As a result, theve hicle occupant will be
pressed into the seat belt with increased
fo rc e. The seat belt will not be able topro-
te ct as intended and could cause addi-
tional injur y.
R Objects or loads in the boot or load com-
partment cannot be restrained bythe seat
backrest. #
Make sure that there ar ben chseat, the
re ar seat and the seat backrest are
engaged before every trip. If
th e leT and right seat backrests are not
engaged and loc ked in place, this will be shown
on the display on the inst rument cluster. If
th e centre seat backrest is not engaged and
loc ked in place, there d lock veri/cation indicator
will be visible.
When When /tting /tting a belt-secur
a belt-secur ed c
ed child r
hild r es
estr
traint sy st
aint syst em,
em,
obse rv
observ e t
e t he f
he f ollo
ollowing:
wing:
O Always comply with the manufacturer's
installation and operating instructions forthe
ch ild restraint system used.
O For a child restraint system in the "Universal"
or "Semi-Universal" categor y,make sure that
th e system has been appr ovedfo rth eve hicle
seat.
Obser vethe no tes under "Suitability of seats
fo r attaching belt-secured child restraint sys-
te ms" (/ page 70).
O When using a w When using a w eight cat
eight categor
egory 0/0+ bab
y 0/0+ bab y
y
car seat and a w
car seat and a w eight cat
eight cat egor
egory I r
y I rearw
earw ar
ard-
d-
f
f acing c
acing c hild r
hild res
estrtraint syst
aint syst em on a r
em on a r ear seat:
ear seat:
adjust the front seat so that the seat does
not touch thech ild restraint system.
O When using a w
When using a w eight cat
eight categor
egory I f
y I forw
orw ar
ard-
d-
f
f acing c
acing c hild r
hild res
estr
traint sy st
aint syst em:
em:remo vethe
head restraint from there spective seat, if
possible. 72
72
Occupant saf
ety

#
When leaving theve hicle, alw aysta ke the
ke y with you and lock theve hicle. Yo
u can use the memory function when theve hi-
cle is switched o..
Seat adjustments for up tothre e people can be
stored and called up using the memory function.
Yo u can sa vesettings forth efo llowing systems:
R Seat, backrest and head restraint
R Steering wheel
R Outside mir rors
R Head-up display Oper Oper
ating t
ating t he memor
he memor y function
y function S S
t tor
or ing
ing #
Set the desired position for all systems. #
Brie0y press theV memory button and
th en press preset position button 4,T
or U within thre e seconds.
An acoustic signal sounds. The settings are
stored. #
T To call up:
o call up: press or brie0y hold preset position
button 4,TorU.
ATer releasing the button, all systems are
mo ved into the stored position. S
S
t
to
o w
w ag
ag e ar
e ar eas
eas N
No
ot
tes on loading t
es on loading t he v
he vehicle
ehicle &
D
DAN
AN GER
GER Risk of exhaust gas poisoning
Combustion engines emit poisonous exhaust
ga ses such as carbon monoxide. Exhaust
ga ses can enter theve hicle interior if theta il-
ga te is open when the engine is running, espe-
cially if theve hicle is in motion. #
Always switch o. the engine before
opening theta ilgate. #
Never drive with theta ilgate open. &
W
WARNING
ARNING Risk of injury from unsecured
items in theve hicle
If objects, lug gage or loads are not secured or
not secured su1cient ly,they could slip, tip Seats and st
owing
123
123

#
Place the mobile phone as close tothe centre
of mat 1as possible with the display facing
upwards.
When thech arging symbol is shown in the
multimedia system, the mobile phone is being
ch arge d.
Malfunctions during thech arging process are
shown in the central displa y.
% The mat can be remo vedfo r cleaning, e.g.
using clean, luk ewarmwater.
R R adio eq
adio eq uipment appr ov
uipment appr oval number
al number s f
s for Br
or Br azil
azil
This device operates on a secondary basis, that is
to say it has no pr otection against harmful inter-
fe re nce, not even from the same type of stations,
and must not cause inter fere nce with systems
ope rating on a prima rybasis.
This product is permitted in accordance with the
procedure de/ned in Directive 242/2000 bythe
Brazilian telecommunications agency ANATEL and
meets the applicable tech nical requ irements.
Fu rther information is available on the ANATEL
we bsite. www.anatel.go v.br #
Further information on the declaration of con-
fo rm ity forve hicle components which receive
and/or transmit radio waves. F
F
itting and r
itting and r emo
emoving t
ving t he
he0oor
0oor mats
mats &
W
WARNING
ARNING Risk of accident due toobjects
in the driver's foot we ll
Objects in the driver's foot we ll may impede
pedal tr avel or block a depressed pedal.
This jeopardises the operating and road saf ety
of theve hicle. #
Stow all objects in theve hicle securely
so that they cannot getinto the driver's
fo ot we ll. #
Always /t the 0oor mats securely and as
prescribed in order toensure that there
is alw ays su1cient room forth e pedals. #
Do not use loose 0oor mats and do not
place 0oor mats on top of one ano ther. #
T To
o /t:
/t: press studs 1onto holders 2. #
T
To r
o r emov
emov e:
e:pull the 0oor mat o. holders 2. Seats and st
owing
141
141

The high beam will switch o. automatically in
the
fo llowing cases:
R Atspeeds below 25 km/h
R Ifot her road users are de tected
R If st reet lighting is su1cient
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc
Switc hing A
hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist ton/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
If Ad aptive Highbeam Assist is activated,
th e_ indicator lamp will light up on the
cent ral display section of the inst rument dis-
pla y.
Switc Switc hing
hingo.
o. #
Switch o. the high beam using the combina-
tion switch. A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus t Plus A
A
dap
dap tiv
tive Highbeam Assis
e Highbeam Assist Plus function t Plus function &
W
WARNING
ARNING Risk of accident despite Adap-
tive Highbeam Assist Plus
Ad aptive Highbeam Assist Plus does not react
to:
R road users without lights, e.g. pedestrians
R road users with poor lighting, e.g. cyclists
R road users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist Plus may failto recognise other road
users with their own lighting, or may recognise
th em too late.
In these, or in similar situations, the automatic
high beam will not be deactivated or will be
activated despite the presence of other road
users. #
Always obser vethero ad and tra1c con-
ditions carefully and switch o. the high
beam in good time. Ad
aptive Highbeam Assist Plus cann ottake into
account road, weather or tra1c conditions.
De tection may be restric ted in thefo llowing
cases:
R in poor visibility, e.g. fog, heavy rain or snow
R ifth ere is dirt on the sensors or the sensors
are obscured
Ad aptive Highbeam Assist Plus is only an aid. Yo u
are responsible for adjusting theve hicle's lighting
to the pr evailing light, visibility and tra1c condi-
tions. 148 148
Light and sight

Ad
aptive Highbeam Assist Plus automatically
switches between thefo llowing types of light:
R Low beam
R Partial high beam
R High beam
R ULTRA RANGE Highbeam ULTRA RANGE Highbeam increases
the bright-
ness of the cone of light tothe legally permitted
maximum.
Pa rtial high beam does not include other road
users in the high beam area. It does not dazzle
th em but enables full high beam illumination for
th e driver apart from theex cluded vehicles.
At speeds below 25 km/h or when there is su1-
cient street lighting:
R The partial high beam and the high beam will
be switched o. automaticall y.
At speeds greater than 30 km/h:
R If no other road users are de tected, the high
beam will switch on automaticall y.
R Ifot her road users are de tected, the partial
high beam will switch on automaticall y.
At speeds abo ve40 km/h:
R If no other road users are de tected on a
st ra ight road, ULTRA RA NGE Highbeam will be
switched on automaticall y.
R Ifot her road users are de tected, the partial
high beam will switch on automaticall y.R
If high ly re0ective signs are de tected, ULTRA
RANGE Highbeam will be switched o. auto-
maticall y.
% The system's optical sensor is located behind
th e windscreen near theove rhead control
panel.
Switc
Switc hing A hing A dap
daptiv
tive Highbeam Assis
e Highbeam Assist Plus t Pluson/o.
on/o.
Switc
Switc hing on
hing on #
Turn the light switch totheà position. #
Switch on the high beam using the combina-
tion switch.
When the high beam is switched on automati-
cally in the dar k, the_ indicator lamp will
light up on the central display section of the
inst rument displa y.
Switc Switc hing
hingo.
o. #
Switch o. the high beam using the combina-
tion switch. Light and sight
149
149