service MERCEDES-BENZ E-CLASS SALOON 2022 Repair Manual

obser
vethe no tes on cold tyres
(/ page 378).
% The values displa yed in the on-board com-
puter may deviate from those of the tyre pres-
sure gauge as they referto sea le vel.At high
ele vations, the tyre pressure values indicated
by a pressure gauge are higher than those
shown bythe on-board computer. In this case,
do not reduce the tyre pressure.
R
R est
est ar
arting t
ting t he tyr
he tyr e pr
e pressur
essur e monit
e monit or
oring syst
ing syst em
em
R
R eq
eq uir
uir ements:
ements:
R The recommended tyre pressure is cor rectly
set forth ere specti veoperating status on all of
th e wheels (/ page 378).
Re start the tyre pressure monitoring system in the
fo llowing situations:
R The tyre pressure has changed.
R The wheels or tyres ha vebeen changed or
ne wly /tted. On-board computer:
4 Service 5
Tyres #
Swipe down wards on Touch Control on the
leT-hand side of the steering wheel.
The Use current pressures as new reference
values? message is shown in the Instrument
Displa y. #
Torestart, press Touch Control on the leT-
hand side of the steering wheel.
The Tyre press. monitor restarted message is
shown in the Instrument Displa y.
Cur rent wa rning message s are deleted and
th eye llow h warning lamp goes out.
ATer you ha vebeen driving for a few minutes,
th e system checks whe ther the cur rent tyre
pressures are within the speci/ed range. The
cur rent tyre pressures are then accep ted as
re fere nce values and monitored.
Be sure toalso pay attention tothefo llowing rela-
te dto pic:
R Notes on tyre pressure (/ page 378) T
T
yr
yr e pr
e pr essur
essur e loss w
e loss w ar
arning syst
ning syst em
em F
F
unction of t
unction of t he tyr
he tyre pr
e pressur
essur e loss w
e loss w ar
arning syst
ning syst em
em
The tyre pressure loss warning system warnsthe
driver bymeans of display messages when there
is a se vere tyre pressure loss.
Syst
Syst em limits
em limits
The system may be impaired or may not function
particula rly in thefo llowing situations:
R incor rect refere nce values were ta ught in
R sudden pressure loss caused byafo re ign
object penetrating the tyre, forex ample
R aneven pressure loss on more than one tyre
occurs
The system has a restric ted or dela yed function
particular lyin thefo llowing situations:
R poor ground conditions, e.g. snow or grav el
R driving with snow chains
R when adopting a very sporty driving st yle with
high cornering speeds or sudden acceleration
R driving with a very heavy or lar getrailer
R driving with a high load Wheels and tyres
381
381

The tyre pressure loss
warning system is only an
aid. It is the driver's responsibility toset the tyre
pressure tothere commended cold tyre pressure
suitable forth e operating situation and tocheck
it.
Be sure toalso obser vethefo llowing fur ther rela-
te d subjects:
R Notes on tyre pressure (/ page 378)
R Displ aymessages about the tyres
(/ page 471)
R
R est est ar
arting t
ting t he tyr
he tyr e pr
e pressur
essur e loss w
e loss w ar
arning syst
ning syst em
em
R
R eq
eq uir
uir ements:
ements:
R The recommended tyre pressure is cor rectly
set forth ere specti veoperating status on all
wheels.
Re start the tyre pressure loss warning system in
th efo llowing situations:
R The tyre pressure has changed.
R The wheels or tyres ha vebeen changed or
ne wly /tted. On-board computer:
4 Service 5
Tyres #
Swipe down wards on Touch Control on the
leT-hand side of the steering wheel.
The Run Flat Indicator active Restart mes-
sage is shown in the displa y. #
Tobegin restart, press Touch Control on the
leT-hand side of the steering wheel.
The Tyre pressure now OK? message is
shown in the displa y. #
Select Yes. #
Tocon/rm restart, press Touch Control on the
leT-hand side of the steering wheel.
The Run Flat Indicator restarted message is
shown in the displa y.
ATer you ha vedriven for a few minutes, the
tyre pressure loss warning system monitors
th e set tyre pressures of all the tyres.
Be sure toalso pay attention tothefo llowing rela-
te dto pic:
R Notes on tyre pressure (/ page 378) Wheel c
Wheel c
hange
hange N
No
ot
tes on selecting,
es on selecting, /tting
/ttingand r
and replacing tyr
eplacing tyr es
es *
N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. &
W
WARNING
ARNING Risk of accident due toincor-
re ct wheel and tyre dimensions
If wheels and tyres of the wrong size are /t ted,
th e service brakes or components in the brake
system and in the wheel suspension may be
damaged. #
Alwaysre place wheels and tyres with
th ose that ful/l the speci/cations of the
original part.
Fo r wheels, pay attention tothefo llowing:
R Designation
R Type 382
382
Wheels and tyres

N
N
o
ot
tes on t
es on t ec
echnical data
hnical data
* NO
NOTE
TEMercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. The
tech nical data was de term ined in accordance
with EU Directives. The data stated only applies to
ve hicles with standard equipment. You can obtain
fur ther information from a Mercedes-Benz Service
Centre.
Onl Onl y f
y for cert
or cert ain countr
ain countr ies:
ies:you can /n dvehicle-
speci/c vehicle data in theCO C documents (CER-
TIFIC ATE OF CONFORMITY). These documents
are supplied when theve hicle is deli vered. On-boar
On-boar
d electr
d electronics
onics N
No
ot
tes on t
es on t am
amper
per ing wit
ing wit h t
h the engine electr
he engine electr onics
onics *
N
NOOTE
TE Premature wearthro ugh improper
maintenance Improper maintenance may cause
vehicle
components towe ar more quickly and the
ve hicle's operating permit may be in validated. #
Always ha veworkon the engine elec-
tronics and related components car ried
out at a quali/ed specialist workshop. T
T
w
w o-wa
o-wa y r
y radios
adios N
No
ot
tes on
es on /tting
/tting tw
two-wa
o-wa y r
y radios
adios &
W
WARNING
ARNING Risk of accident due to
improper workon two-w ayradios
If two-w ayradios are manipulated or retro/t-
ted incor rectl y,the electromagnetic radiation
from the two-w ayradios can inter fere with the
ve hicle elect ronics and jeopardise the operat-
ing saf ety of theve hicle. #
You should ha veall workon electrical
and electronic components car ried out
at a quali/ed specialist workshop. &
W
WARNING
ARNING Risk of accident due to
improper operation of two-w ayradios
If yo u use two-w ayradios in theve hicle
improper ly,th eir electromagnetic radiation
can disrupt theve hicle's elect ronics. This is
th e case in thefo llowing situations, in particu-
lar:
R The two-w ayradio is not connected toan
ex terior aerial.
R The exterior aerial is /tted incor rectly or is
not a lo w-re0ection aerial.
This could jeopardise the operating saf ety of
th eve hicle. #
Have the lo w-re0ection exterior aerial /t-
ted at a quali/ed specialist workshop. #
When operating two-w ayradios in the
ve hicle, alw ays connect them tothe lo w-
re 0ection exterior aerial. 394
394
Te
ch nical data

If
yo u ha veacciden tally refuelled wi th the
wrong fuel: #
Do not switch on theve hicle. #
Consult a quali/ed specialist workshop. The
following compatibility indications for fuel
apply toyour vehicle: 1
For petrol with maximum 5% ethanol byvol-
ume
2 For petrol with maximum 10% ethanol byvol-
ume
The compatibility indications for fuel on theve hi-
cle according tothe European standard EN 16942 can be
found on the information label in the fuel
/ller 0ap or on the fuel dispenser or pump nozzle
suitable foryo ur vehicle thro ughout Europe.
If th eav ailable fuel is not su1ciently low in sul-
phur, this can produce unpleasant odours.
The recommended octane number foryo ur vehi-
cle can be found on the information label in the
fuel /ller 0ap.
E350 :
E350 : Onlyrefuel using super unleaded petrol
wi th at least 98 RON if you wish toachie vemaxi-
mum engine output. Alternativel y,yo u can also
re fuel using premium-g rade unleaded petrol with
at least 95 RON.
As a temp orary measure, if there commended fuel
is not available, you may also refuel wi thregular
unleaded petrol with at least 91 RON.
This may reduce engine output and increase fuel
consum ption.
Ne verre fuel using petrol wi than even lo werRO N.
Fu rther information on fuel can be obtained at a
/lling station or a quali/ed specialist workshop. Inf
Inf or
ormation on additiv
mation on additiv es in pe
es in petr
trol (v
ol (v ehicles with
ehicles with
pe
pe tr
trol engine)
ol engine)
Obser vethe no tes on operating 0uids
(/ page 399).
* NO
NOTE
TEDamage from use of unsuitable
additives Even small amounts of
the wrong additive may
lead tomalfunctions occur ring. #
Only add cleaning additives recommen-
ded byMercedes-Benz tothe fuel. Mercedes-Benz
recommends that you use brand-
name fuels with additives.
In some countries, the fuel available may not ha ve
su1cient additives. Deposits could build up in the
fuel injection system as a result. In this case, in
consultation with a Mercedes-Benz service
centre, mix the fuel with the cleaning additive rec-
ommended byMercedes-Benz. Obser vethe no tes
and mixing ratios indica ted on theta nk. Te
ch nical data
401 401

*
N
N O
OTE
TE Engine damage caused byan inco r-
re ct oil /lter, incor rect oil or additi ves #
Do not use engine oils or oil /lters other
th an those which meet the speci/cations
necessary forth e prescribed service
inter vals. #
Do not alter the engine oil or oil /lter in
order toachie velonger change inter vals
th an prescribed. #
Do not use additives. #
Have the engine oil changed aTer the
prescribed inter vals. Mercedes-Benz
recommends having the oil
ch anged at a quali/ed specialist workshop.
Only use engine oils appr ovedfo ryo ur vehicle by
Mercedes-Benz.
P P e
etr
tr ol engines:
ol engines: for cer tain countries, di.erent
engine oils can be used in conjunction with
re duced maintenance inter vals. Further informa-
tion on di.erent engine oils can be obtained at a
qu ali/ed specialist workshop.
Quality and capacity of engine oil Quality and capacity of engine oil
No No t f
t for plug-in h
or plug-in h ybr
ybrid:
id:
Engine oil
Engine oil speci/cations
speci/cations (pe
(petr
trol engines)
ol engines) P
P
e
etr
tr ol engines
ol engines MB-Fr
MB-Freig
eigabe or MB-
abe or MB-
Appr ov
Approv al
al
All models 229.51, 229.52,
229.61, 229.71,
229.72 1)
1) recommended for lo west possible fuel consu mption (lo westSA E
viscosity class in each case; obser vepossible restrictions of the
appro vedSA E viscosity classes) Engine oil Engine oil
speci/cations
speci/cations (diesel engines)
(diesel engines) Diesel engines
Diesel engines
MB-Fr
MB-Freig
eigabe or MB-
abe or MB-
Approv
Approv al
al
E 400 d 4MATIC 229.52, 229.611)
All other model s2 29.52, 229.61,
229.71, 229.72 1)
1) recommended for lo west possible fuel consu mption (lo westSA E
viscosity class in each case; obser vepossible restrictions of the
appro vedSA E viscosity classes) To
achie vethe lo west possible fuel consum ption,
it is recommended touse the engine oil speci/ca-
tions mar ked in theta ble forth e lo westSA E vis-
cosity class. Obser veany possible restrictions of
th e appr ovedSA E viscosity classes.
% Ifth e engine oils listed in theta ble are not
av ailable, you may add a maximum of 1.0 litre
of thefo llowing engine oils once onl y.
V
V ehicles wit
ehicles wit h a pe
h a petr
trol engine:
ol engine: MB-Freigabe or
MB-Appr oval 229.31 or ACEA C3
V
V ehicles wit
ehicles wit h a diesel engine:
h a diesel engine:
R E 400 d 4MA
E 400 d 4MA TIC:
TIC:MB-F reigabe or MB-
Appr oval 229.51 or ACEA C3 Te
ch nical data
405
405

Displa
Displa
y messag
y messag es
es Intr
Intr
oduction
oduction Inf
Inf
or
ormation about displa
mation about displa y messag
y messages
es
Display messages appear on the inst rument dis-
pla y.
Display messages with graphic symbols are sim-
pli/ed in the Owner's Manual and may di.er from
th e symbols on the inst rument displa y.The instru-
ment display sh ows high-priority display messages
in red. Cer tain display message s are accompa-
nied byawa rning tone.
Please act in accordance with the display mes-
sages and follow the additional no tes in the Own-
er's Manual.
Fo r some display messages, symbols will also be
shown:
R Õ Further information
R ¨ Hide displ aymessage
Wi th th e leT-hand Touch Control, you can select
th ere specti vesymbol byswiping tothe leT or
ri ght. Pressing Õdispla ysfur ther information on th
e media displa y.Press the¨ symbol tohide
th e display message.
Yo u can hide lo w-priority display messages by
pressing the back button Gorthe leT-hand
To uch Control. The display message s willthen be
stored in the message memor y.
Re ctify the cause of a display message as quickly
as possible.
High-priority display message s cannotbe hidden.
The instrument display will show these display
messages permanently until the cause of the dis-
play message has been recti/ed.
Calling up sav
Calling up sav ed displa ed display messag
y messag es
es
On-board computer:
4 Service 5
1 message
If th ere are no display messages, No messages
will appear on the inst rument displa y. #
Scroll thro ugh the display messages byswip-
ing upwards or down wards on the leT-hand
To uch Control. #
T
To e
o e xit t
xit t he messag
he messag e memory
e memory:
:press the back
button G. Display messages and
warning/indicator lamps
413
413

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Request service personnel from the operator of thech arging station via the emer gency call button or the emer-
ge ncy numbers attached tothech arging station.
Vehicle not currently being
charged Charging station
fault *A
malfunction has occur red in thech arging station or the RFID card is not recognised. #
Start thech arging process at a di.erent charging station.
or #
Have the RFID card checkedto ensure it is functioning.
Charging method currently
unavailable Please try
again or change charging
method *A
temp orary malfunction has occur red in thech arging station. #
Wait until the malfunction has passed.
or #
Start thech arging process at a di.erent charging station.
Charging fault Please
change charging method
See Owner's Manual *A
temp orary malfunction has occur red in thech arging station. #
Wait until the malfunction has passed.
or #
Start thech arging process at a di.erent charging station.
Only electric drive availa-
ble Power limited *T
he fuel tank is em pty and the combustion engine is switched o.. The output of your vehicle is limi ted because you
are driving in elect ric mode. 428 428
Display messages and
warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Refuel immedia tely.
Subse quentl y,there may be temp orary restrictions in theav ailability of elect ric mode over a driving distance of
50 km.
If th ere is fuel in theve hicle, there is a fault with the combustion engine. #
Consult a quali/ed specialist workshop.
"Electric" drive program
currently unavailable *T
hecharge leve l of the high-voltage battery is not su1cient forth e Electric drive prog ram.
Char gethe high-voltage battery (/ page 200).
Reduced drive system per-
formance See Owner's
Manual *T
he drive system switches toemer gency ope ration mode due toa malfunction. #
Drive on carefull y. #
Consult a quali/ed specialist workshop.
Û
Battery overheated Stop,
everybody out! Outdoors if
possible *T
he high- voltage battery has overheated. There is a risk of /re. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
If possible, stop theve hicle in the open air and ensure that all vehicle occupants getout.
% Supporting vehicle functions may activate automaticall y,e.g. the air-recirculation mode as part of climate control. #
Do not continue driving. #
If smoke is present, lea vethe danger zone and call the /re service immediatel y. #
Consult a quali/ed specialist workshop even if there are no extern al signs of a /re. Displ
aymessages and warning/indicator lamps
429 429

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
ÿ
Coolant Stop vehicle
Switch engine off *T
he coolant is too hot. #
Stop immediately in accordance with the tra1c conditions and switch o. theve hicle. &
W WARNING
ARNING Risk of burns when opening the bonnet
If yo u open the bonnet in theev ent of an overheated engine or /re in the engine compartment, thefo llowing situa-
tions may occur:
R You may come into contact with hot gases.
R You may come into contact with other escaping hot operating 0uids. #
Before opening the bonnet, allow the engine tocool down. #
Intheev ent of a /re in the engine compartment, keep the bonnet closed and call the /re service. #
Wait until the engine has cooled down. #
Make sure that the air supply tothera diator is not obstructed. #
Avoiding high loads on the engine, drive tothe nearest quali/ed specialist workshop. In doing so, ensu rethat the
coolant temp erature display remains below 120°C.
ÿ *T
here is a malfunction in the engine cooling system. #
Avoiding high loads on the engine, drive tothe nearest quali/ed specialist workshop. In doing so, ensu rethat the
coolant temp erature display remains below 120°C. 440
440
Display messages and
warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
#
Stop vehicle Leave engine
running *T
he 12 V battery charge leve l is too lo w. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Leavethe engine running. #
Ifth e display message disappears: drive on. #
Ifth e display message does not disappear: consult a quali/ed specialist workshop.
Û Battery overheated Stop,
everybody out! Outdoors if
possible *T
he 48 V battery is overheating. There is a risk of /re. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
If possible, stop theve hicle in the open air and ensure that all vehicle occupants getout.
% Supporting vehicle functions may activate automaticall y,e.g. the air-recirculation mode as part of climate control. #
Do not continue driving. #
If smoke is present, lea vethe danger zone and call the /re service immediatel y. #
Consult a quali/ed specialist workshop even if there are no extern al signs of a /re.
Û
48 V battery See Owner's
Manual *T
he 48 V on-board elect rical system has function restrictions.
Comfort functions ma y berestric ted. #
Consult a quali/ed specialist workshop immediatel y. Display messages and
warning/indicator lamps
469 469