MERCEDES-BENZ M-Class 2012 W166 Owner's Manual

Possible
causesofmalfunct ion:
R the on-board power supply isnot within a
permissible voltrange.
R the temperat ureofthe DC/A Cconv erter is
temporarily toohigh.
R some smallelectronicdevices havea
cons tantnomin alpower ofless than
150 W,but avery high inrush current.
These devices willnotwork. Ifyou conn ect
such adevice, 115Vpower socket :will
not supply itwith power.
If indicator lamp;still does notlight up,
cont actaspecialist workshop, e.g.an
authorized Mercedes-B enzCenter. mbr
ace
Import antsafety notes !
Alicen seagreem entmust existino rder
to activa tethe mbrace service. Ensurethat
you rsyst em isact ivat edand readyforu se,
and press theï MBInfo callbutton to
register. Ifany ofthe steps mentioned is
not carried out,thesystem maynotbe
activated.
If you have questions aboutthe activation,
cont actone ofthe following telephone
assistance services:
R USA: Mercedes-Ben zCustome r
As sist anc eCen teru nde r
1-800-FO R-MERC edes
(1-8 00-367 -6372) or1-888-9 90-9007
R Can ada: Custom erServ iceat
1-888-9 23-8367
Shor tlyafter succes sfullyr egisterin gwith the
mbrace service,auser IDand password will
be sent toyou bypost. Youcanusethis
password tolog into the mbrace section
under "Owners Online"athtt p://
www.mbusa. com20
. The
mbrace systemisavailable if:
R ithas been activat edand isoperation al.
R the corr espondin gmobile phonenetwork
is available fortran smitt ingdata tothe
Customer Center.
R aservic esubscript ionisavailable.
R the start erbatter yis sufficien tlycharged. i
Det
erminin gthe location ofthe vehicle on
a map isonly possible ifther eis sufficien t
GPS recept ionand thevehicle position can
be forwarded tothe Customer Center.
The mbrace system The
mbrace systemprovides different
servic es,e.g. :
R automatic andmanual emergen cycall
R Roadside Assistancecall
R MB Infocall
To adjust thevolume duringanmbrace call,
proceed asfollows:
X Press theW orX button onthe
multifunc tionsteer ingwheel.
or
X Use thevolume controller ofthe audio
system/ COMAND .
You canfind furth erinfor mation anda
descript ionofall available featuresunder
"Owners Online"athtt p://
www.mbusa.com 21
.
System self-test Aft
eryou have switch edon the ignition ,the
system carriesoutaself-diagn osis.
20 USA only.
21 USA only. Featur
es
299Stowing and features Z

G
WARNING Am
alfun ction inthesyst emhas been
det ectedifon eof thefoll owin gcon dition s
occ urs:
R theind icat orlamp intheSO Sbutt ondoes
no tlight updurin gthe syst emself-
diagno sis.
R the indic atorlamp inthe F Roadside
Ass istan cebutt ondoes notlight updurin g
the syst emself- diagno sis.
R The indic atorlamp inthe ï informat ion
butt ondoes notlight updurin gself-
diagno sisofthe syst em.
R the indic atorlamp inthe SOS button,
F Roadside Assistan cebutt onorï
inf ormat ionbutt oncon tinues tobe litred
aft erthe syst emself- diagno sis.
R The Tele Aid Inop
erative or Tele Aid
Not
Activated mess
ageappears inthe
multif unction display afterthe syst emself-
tes t.
If amalfun ction isindic ated asoutlin edabove,
the syst emmay notoperat eas expec ted.In
the even tofane mergency, assistance must
be summoned byother means.
Have thesystem checked atthe nearest
au thorized Mercede s-BenzCenter orcontact
the follo wing service hotlines:
R USA: Mercede s-BenzCustomer Assistance
Center under
1-800-FOR-MERCed es(1-800-367-6372)
or 1-888-990- 9007
R Canada: Customer Service at
1-888-923- 8367
Emerge ncycall Important
safetynotes
! Alicen seagreem entmust existino rder
to activate thembrace service. Ensurethat
you rsyst em isact ivat edand readyforu se,
and press theï MBInfo callbutton to
register. Ifany ofthe steps mentioned is
not carried out,thesystem maynotbe
activated. If
you have questions aboutthe activation,
cont actone ofthe following telephone
assistance services:
R USA: Mercedes-Ben zCustome r
As sist anc eCen teru nde r
1-800-FO R-MERC edes
(1-8 00-367 -6372)or1-888-9 90-9007
R Can ada: Custom erServ iceat
1-888-9 23-8367
An eme rgency callis dialed automa tically if
an airb ag orEm erg ency Ten sion ingDevic eis
tr igger ed. i
An
mbr ace eme rgencycall that has been
ini tiat edauto maticall ycan notb e
term inated bythe custo mer .
An eme rgency callcan also be initia ted
ma nua lly.
As soon asthe eme rgency callha sbe en
ini tia ted ,the indicator lamp inthe SOS button
fl as he s.Th e Con
nectingCal l mes
sage
ap pe arson the multifu nctio ndisplay.
The audio output ismut ed.
Onc eacon nection hasbeen established, the Call
Connected mess
ageappears inthe
mult ifunc tiondisplay.
All impor tantinf orm ation onthe emer gency
is transm itted, forexam ple:
R curr entlocat ionofthe vehic le(as
dete rmin edbythe GPS system)
R vehic leident ification numb er
R inf orm ation onthe type ofemer gency
Sho rtly aft erthe emer gencycall has been
init iated, avoic econ nection isautom atically
est ablished betweenthe Merc edes- Benz
Custom erAss istanc eCent erand thevehic le
occ upant s.Ifthe vehic leocc upant srespo nd,
the Merc edes- BenzCustome rAssistance
Center attempts toget more information on
the emergency. i
If
no vehicle occupant answers,an
ambul anceisimmediately senttothe
vehicle. 300
FeaturesStowing and features

G
WARNING If
the indica torlamp inthe SOS button is
flas hing continuou slyand novoice
connection tothe Mercede s-BenzCustomer
Assistance Centerwasestab lished, then the
mbrace systemcouldnot initia tean
emerge ncycall(e.g. therelevant cellular
phone network isnot available ).
The messa ge Call
Failed app
ears inthe
multi function displayforapp roximatel y
10 seconds.
Shoul dthis occur, assistance mustbe
summone dby other means.
Making anemerge ncycall X
To initiate anemerge ncycall
manually: presscover :brie flytoopen
it.
X Press SOSbutton ;brie fly.
The indica torlamp inSOS button ;
flas hes until theemerge ncycallis
conclude d.
X Wai tfor avoice connection tothe
Mercede s-BenzCustomer Assistance
Center.
X After theemerge ncycallisended, close
cover :. G
WARNING If
you feel inany way injeopa rdywhen inthe
vehicl e(e.g. smoke orfire inthe vehicl e,
vehicl ein adange rousroad location), please
do not waitfor voice contact afteryouhave
presse dthe SOS button. Careful lylea vethe
vehicl eand move toasafe location. The Mercede
s-BenzCustomer Assistance Center
wil lau tomatical lycontact localemerge ncy
officia lswith thevehicl e'sapp roximate
loca tion ifthey receive anautomatic SOS
signa land cannot makevoicecontact withthe
vehicl eoccupa nts.
Roadside Assistanc ebutton X
Press andhold Roadsid eAssistance
button :for more thantwoseconds.
This initia tesacall tothe Mercede s-Benz
Cu stomer Assistance Center.Theindica tor
lamp inRoa dsid eAssistance button:
flas hes whilethe call isactive. The Connect
ing Call messa
geapp ears inthe
mul tifunction display.The audi ooutput is
muted.
If aconn ection canbeestablished, the Call
Connected message
appearsinthe
multifunction display.
If acellula rphone network isavaila bleand
there issufficient GPSreception, thembrace
system transmit sdata tothe Mercedes-Ben z
Customer AssistanceCenter, forexample:
R current location ofthe vehicle
R vehicle identification number i
The
displa yof the audi osystem or
COMAND showsthatanmbrace callis
active. During thecall, youcan change to
the navigation menubypressing theNAVI
button onCOMAND, forexample.
Voice output isnot availa ble. Features
301Stowing and features Z

Av
oice conn ection isestablished between
the Mercedes-B enzCustomer Assistance
Center andthevehicle occupant s.
X Descr ibethe type ofassistance needed.
The Mercedes-B enzCustomer Assistance
Center eithersends aquali fiedMercedes-
Benz techn icianororganizes foryour vehicle
to be trans ported tothe nearest authorized
Mercedes-B enzCenter. Youmay becharged
for services suchasrepair workand/or
towing. Further detailsareavaila bleinyour
mbrace manual. i The
mbrace systemfailedtoinitiate a
Roadside Assistancecallif:
R the indicator lampinRoadside
Assist ancebutton :isflashing
cont inuously.
R no voice connection tothe Mercedes-
Benz Customer AssistanceCenter was
established.
This may bebecause thecorrespon ding
mobile phonenetwork isnot availa ble.
The Call
Failed message
appearsinthe
multifunct iondisplay .
X To end acall: press the~ button onthe
mul tifunctio nstee ring wheel.
or
X Pre ssthe corr espo ndi ng button forend ing
a ph one callon the audio sy ste mo ron
COMA ND.
MB Info callbutton X
Pre ssand hold MBInfo call button: for
mor eth an two seconds.
This initiate sa call totheMer cedes-Ben z
Cust omerAssistance Center.Theindicator
lamp inMB Info callbutton :flashes while
the conn ection isbeing established .The Connecting Call message
appearsinthe
multifunction display.The audi ooutput is
muted.
If aconn ection canbeestablished, the Call
Connected message
appearsinthe
multifunction display.
If acellula rphone network isavaila bleand
there issufficient GPSreception, thembrace
system transmit sdata tothe Mercedes-Ben z
Customer AssistanceCenter, forexample:
R current location ofthe vehicle
R vehicle identification number i
The
displa yof the audi osystem or
COMAND showsthatanmbrace callis
active. During thecall, youcan change to
the navigation menubypressing theNAVI
button onCOMAND, forexample.
Voice output isnot availa ble.
Av oice conn ection isestablished between
the Mercedes-B enzCustomer Assistance
Center andthevehicle occupant s.You can
obtain informat iononhow tooperate your
vehicle's systems, onthe location ofthe
nearest authorized Mercedes-B enzCenter,
and onfurther products andservices offered
by Mercedes-B enzUSA .
Further detailsonthe mbrace systemcanbe
found under http://www.mbusa. com22
.
Log inunder "Owners Online". i The
mbrace systemfailedtoinitiate an
MB Info callif:
R the indicator lampinMB Info call
button :isflashing continuously.
R no voice connection tothe Mercedes-
Benz Customer AssistanceCenter was
established.
22 USA only. 302
Featur
esStowing and features

This
may bebecause thecorrespon ding
mobile phonenetwork isnot availab le.
The Call
Failed message
appearsinthe
multifunct iondisplay .
X To end acall: press the~ button onthe
mul tifunctio nstee ring wheel.
or
X Pre ssthe corr espo ndi ng button forend ing
a ph one callon the audio sy ste mo ron
COMA ND.
Call prior ity When
servicecall sare active, e.g. Roadsi de
As sist anc eor MB Info call s,an eme rgency
call can still be initia ted. Inthis cas e,an
eme rgencycall willtakeprio rityand override
all other active calls.
The indicat orlamp oftheres pec tive but ton
flas hes untilth ecall isen ded. Aneme rgency
call can onlybe term inat edbytheMer cedes-
Ben zCust omerAs sist anc eCen ter. All other
call scan beended bypre ssin gth e~
but tono nthe multifunction steeringwheelor
the corresponding buttonforending a
telephone callonthe audi osystem oron
COMAND. i
If
an mbrace callisinitiated, audiooutput
is muted. Themobile phoneisno longer
conn ected toCOMAND. However,ifyou
want touse your mobile phone, we
recommen dthat youdothis only when the
vehicle isstationary andinasafe location.
Dow nloading destinations i
Inform
ationonthe componen tsand
operating principles ofCOMAND canbe
found inthe separate COMAND operating
instruct ions. i
You
canonly usetheDestin ation
Download functionifthe vehicle is
equipp edwith anavigation system.
Destin ationDownload givesyouaccess toa
database withover 15million pointsof
interest (POIs)/important destinationsthatcan
bedownloaded ontothenavigation
system ofyour vehicle. Ifyou know the
destination, youcan download theaddress or
obtain thelocation ofpoints ofinterest
(POIs)/important destinationsinthe
surrounding area.
You areprompted toconfirm routeguidance
to the address entered.
The system calculates theroute and
subsequ entlystarts theroute guidancewith
the address entered. i
If
you select No ,
the address canbestored
in the address book. i
The
Destin ationDownload functionis
availa bleifthe corresponding mobile
phone network isavaila bleand data
transf erispossible.
Route Assistance
This service ispart ofthe mbrace PLUS
Package andcannot bepurchased
separately. i
You
canalso usetheRoute Assistanc e
funct ionifyour vehicle isnot equipp edwith
a navigation system.
Within theframework ofthis service, you
receive aprofessional andreliabl eform of
navigation supportwithouthavingtoleave
your vehicle.
The customer servicerepresentat ive
determines asuitable drivingroutebased on
your current vehicleposition andthedesired
destination andguides youlivethrough the
current sections ofthe route.
Search &Send "Sear
ch&Sen d"isadest inationentry
ser vice.You canfindfurt her inform ationon
"Sear ch&S end" inthe separate COMAND
operatin ginst ruct ions. Featur
es
303Stowing and features Z

Vehi
cle remo teope ning If
yo uha ve uni ntentio nallylocked your
veh icle(e .g. the Sma rtKey isstil lin the
veh icle) and arep laceme ntSma rtKey isnot
ava ilab le,the vehiclecan beopene dby a
Mer cedes-Be nzCu stom erAssi stance Center.
The vehiclecan beopene drem otelyup tofou r
da ys afte rthe ignition waslastswitched off.
X Contact thefollowing servicehotlines:
R USA: Mercedes-Ben zCustome r
As sist anc eCen terund er1-80 0-FO R-
ME RCedes (1-800-36 7-63 72)or
1-8 88- 990- 9007
R Canada: Customer Serviceat
1-8 88- 923- 8367
You willbeasked foryour password.
X Return toyour vehicle atthe time agreed
upon withtheMercedes-B enzCustomer
Assist anceCenter.
X Pull thetailgate handleforatleast 20
seconds untiltheindicator lampinthe SOS
button (Ypage 300)flashes.
The Connecting
Call message
appears
on the multifunct iondisplay .
Alter natively, thevehicle canalso beopened
via the Internet oran iPhone inthe "Owners
Online" sectionusingyourIDnumber and
password 23
. i
Vehicle
remoteunlockin gis only possible
if the correspon dingmobile phonenetwork
is accessible.
The SOS button flashes andthe Call
Connected message
appearsinthe
multifunct iondisplay toconf irmthat the
comman dfor vehicle remote unlockin ghas
been received.
If you pull thetailgate handleformore than
20 seconds beforereceiving authorization
for remote unlockin gfrom theMercedes-
Benz Customer AssistanceCenter, you
must wait15minutes beforeyoucan pull
the tailgate handleagain. Vehicle
remoteclosin g If
you forget tolock your vehicle butareno
longer inthe vicinit yof the vehicle, itcan be
locked foryou bythe Mercedes-B enz
Customer AssistanceCenter.
The vehicle canbelocked remotely uptofour
days after theignition waslastswitched off.
X Contact thefollowing servicehotlines:
R USA: Mercedes-B enzCustomer
Assist anceCenter under1-800-FOR-
MERCedes(1- 800-367-6372 )or
1-8 88-990- 9007
R Canada: Customer Serviceat
1-8 88-923- 8367
You willbeasked foryour PIN.
The next time youareinyour vehicle and
switch onthe ignition, the Tele Aid: Doors
Locked
byRemote message
appearsinthe
multifunct iondisplay .
Alter natively, thevehicle canalso belocked
via the Internet oran iPhone inthe "Owners
Online" sectionusingyourIDnumber and
password. i
The
vehicle valetlockin gfeature is
availa blewhen therelevant mobilephone
network isavaila bleand data conn ection is
possible.
Service forrecovering astolen vehic le If
yo ur veh icleha sbe en stol en:
X Noti fythe police.
The police willissu eanum bered incident
rep ort.
X Thi snum berw illbe forwarded tothe
Merc edes- BenzCustome rAssistance
Center together withyour PIN.
The Mercedes-Benz CustomerAssistance
Center thenattempts tolocate thembrace
system. TheMercedes-Benz Customer
Assistance Centercontacts youand the
local lawenforcemen tagency ifthe vehicle
is located. However, onlythelaw
23 USA only. 304
Featur
esStowing and features

enfor
cemen tagency isinfor med ofthe
location ofthe vehicle. i
If
the anti- theftalarm systemisact ive for
long erthan 30seco nds,mbrac e
autom atically inform sthe Merc edes- Benz
Custom erAss istanc eCent er. Gar
age door opener
Imp ortant safety notes The
Hom eLink®
garage dooropener
int egrat edinthe rear- view mirrorallows you
to operat eup tothr ee diff eren tdoor and gate
systems. i Certain
garagedoordrives are
incompat iblewith theintegr atedgarage
door opener. Ifyou have difficulty
programming theintegr atedgarage door
opener, contactanauthorized Mercedes-
Benz Center orcall one ofthe following
telephone hotlines:
R USA: Mercedes-B enzCustomer
Assist anceCenter at
1-8 00- FOR-ME RCedes
R Canada: Customer Serviceat
1-8 00- 387- 0100 G
WARNIN
G Before
programming theintegrat edremote
cont roltoagarage dooropener orgate
operator, makesurepeople andobject sare
out ofthe way ofthe device toprevent
potent ialharm ordamage. When
programming agarage dooropener, thedoor
moves upordown. Whenprogramming agate
operator, thegate opens orcloses.
Do not use theintegrat edremote controlwith
any garage dooropener thatlacks safety stop
and reverse features asrequired byU.S.
federal safetystandards (thisincludes any
garage dooropener modelmanufactured
before April1,1982 ).A garage doorthat
cann otdetect anobject -signaling thedoor to
stop andreverse -does notmeet current
U.S. federal safetystandards.
When programming agarage dooropener,
park vehicle outside thegarage.
Do not run theengine whileprogramming the
integrat edremote control.Inhalation of
exhaust gasishazardous toyour health. All
exhaust gascont ains carbon monoxide(CO),
and inhaling itcan cause unconsciousness
and possible death.Allexhaust gascont ains
carbon monoxide(CO), andinhaling itcan
cause unconsciousness andpossible death. i
USA
only:
This device complies withpart15ofthe
FCC Rules. Operation issubject tothe
following twocondit ions:
1. This device maynotcause harmful
interf erence, and
2. this device mustaccept anyinterf erence
received, includinginterference thatmay
cause undesired operation.
Any unauthorized modificationtothis
device couldvoidtheuser's authority to
operate theequipment.
FCC ID:CB2HMIH L4 i
Canada
only:
This device complies withRSS-2 10of
Industr yCanada. Operation issubject to
the following twocondit ions:
1. This device maynotcause interference,
and
2. this device mustaccept anyinterf erence
received, includinginterference thatmay
cause undesired operationofthe device.
Any unauthorized modificationtothis
device couldvoidtheuser's authority to
operate theequipment.
IC: 279B -HMIHL4 Featur
es
305Stowing and features Z

Program
mingtheintegrat edgarage
door opener onthe rear -view mirror Program
ming G
WARNING Only
press thetransm itterbutton onthe
integrated garagedooropener ifthere areno
persons orobject spresent withinthesweep
of the garage door.People couldotherwise be
injured bythe movement ofthe door. Int
egrated garagedooropener onthe rear-view
mirror
Garage doorremote controlA isnot part of
this integrat edgarage dooropener. i
To
achieve thebest result, insertnew
batteries ingarage doorremote control
A before programming.
X Before programming forthe first time, clear
the memory ofthe integrat edgarage door
opener (Ypage 308).
X Turn theSmartK eytoposition 2in the
ignition lock.
X Press andhold oneoftransm itter
buttons ;to? onthe integrat edgarage
door opener.
Indicator lamp:starts toflash yellow
after ashort period. i
Indicator
lamp:flashes yellow
immediately afterthetransm itterbutton
has been stored forthe first time. Ifthe
transm itterbutton hasalready been
programmed, indicatorlamp:does not
flash yellow until10seconds haveelapsed. X
Relea sethe transm itterbutton.
X Point transm itterbutton Bofgarage door
remote controlA towards thetransm itter
buttons onthe rear-view mirrorata
distance of2to 8inches (5to 20 cm). i
The
distance requiredbetween garage
door remote controlA and theintegrated
garage dooropener depends onthe system
of the garage doordrive. Youmight require
several attempt s.You should testevery
position foratleast 25seconds before
trying another position.
X Press andhold transm itterbutton Bon
garage doorremote controlA until
indicator lamp:lights upgreen.
Programming iscomplete ifindicator
lamp :lights uporflashes green.
X Relea setransm itterbutton ;,=or? on
the integrat edgarage dooropener andthe
transm itterbutton ongarage doorremote
cont rolB.
If indicator lamp:lights upred:
X Repea tthe programming procedureforthe
transmit terbutton. Whendoingso,vary the
distance between thegarage doorremote
cont roland therear-view mirror. i
If
the indicator lampflashes greenafter
successful programming, thegarage door
system isoperating onarolling code. After
programming, youmust synchron izethe
garage dooropener integratedinthe rear-
view mirror withthereceiver ofthe garage
door system.
Synchronizing therolling code
Your vehicle mustbewithin rangeofthe
garage orgate opener drive.Makesurethat
neither yourvehicle norany persons/ objects
are present withinthesweep ofthe door or
gate.
Observe thesafety noteswhen performin g
the rolling codesynchron ization. 306
Featur
esStowing and features

X
Turn theSmart Keytoposition 2in the
ignition lock.
X Press theprogramming buttonofthe door
or gate drive (seethedoor orgate drive
operating instructions ,e.g. under
"Programming ofadditional remote
cont rols"). i
You
now normally have30seconds to
initiate thenext step.
X Press thepreviously programmed
tran smitt erbutton ofthe HomeLin k®
integr atedgarage dooropener repeatedly
in succession untilthedoor opens.
The rolling codesynchron izationisthen
complete.
Notes onprogr ammingthe remot e
control
Canadian radiofrequency lawsrequire a
"break" (orinter ruption) ofthe tran smission
signals afterbroadcasting forafew seconds .
These signals maynottheref orelast long
enough forthe integr atedgarage dooropener
to recogn izethe signal during programming.
Comparable withCanadian law,some U.S.
garage dooropeners alsohave abuilt-in
"interr uption".
If you liveinCanada orhave difficulties
programming thegarage dooropener
(regardless ofwhere youlive) when usingthe
programming steps(seeabove), proceed as
follows:
X Press andhold oneoftran smitt er
button s; to? ofthe integr atedgarage
door opener.
Indicat orlamp :start sto flash yellow
after ashort period.
X Release thetran smitt erbutton .
X Press transmitt erbutton Bofthe garage
door remote controland hold fortwo
seconds, thenrelease fortwo seconds,
then press againandhold fortwo seconds. X
Repeat thissequence ontran smitt er
button Bofthe garage doorremot e
cont roluntil indicator lamp:isgreen.
Repeat theprocess ifindicator lamp:
turns red.
X Contin uewith theother programming
steps (seeabove).
Problems whenprogramming
If you areexperienc ingproblems
programming theintegr atedgarage door
opener onthe rear-view mirror,takenoteof
the following instructions :
R check thetran smission frequency of
garage doorremot econt rolA (usual ly
found onthe reverse sideofthe remot e
cont rol).
The integr atedgarage dooropener is
compatible withdevices thatcanbe
operated withunits inafrequency rangeof
280 to390 MHz.
R change thebatteries ingarage doorremot e
cont rolA.T hisincreases theprobabil ity
that garage doorremote controlA will
send astron gand precise signaltothe
integrated garagedooropener onthe rear-
view mirror.
R when programming, holdgarage door
remote controlA atdifferent distances
and angles fromthetransmit terbutton that
you areprogramming. Trydifferent angles
at adistance between 2and 12inches (5
to 30 cm) orthe same angle atvarying
distances.
R ifanother remotecontrolfor the same
garage doordrive isavaila ble,repeat the
same programming stepswiththisremote
cont rol.Before youperform thesteps ofthe
operation, makesurethatthere arenew
batteries inthe garage doorremote
cont rol.
R note thatsome remote controlsonly
transmit foralimited amount oftime (the
indicator lamponthe remote controlgoes Features
307Stowing and features Z

out).
Press theremote controlbutton again
before itstops transmitting.
R align theanten nacable ofthe garage door
opener unit.Thiscanimprove signal
reception /transmission.
Opening/cl osingthegara gedoor Once
programmed, theintegr atedgarage
door opener willassume thefunct ionofthe
garage doorsystem's remotecontrol.Please
also read theoperating instructions forthe
garage doorsystem.
X Turn theSmart Keytoposition 2in the
ignition lock.
X Press transmitterbutton ;,=or? inthe
overhead controlpanel thatyouhave
programmed tooperate thegarage door.
Garage doorsystem withafixed code:
indicator lamp:lights upgreen.
Garage doorsystem witharolling code:
indicator lamp:flashes green. i
The
trans mitterwill trans mitasignal for
as long asthe trans mitterbutton isbeing
pressed. Afteramaximum often seconds,
trans mission istermin atedandindicator
lamp :flashes yellow.Press the
transmitter buttonagain,ifnecessary .
Cle aring thememory ofthe integ rated
garage dooropeneron the rear-view
mirror X
Turn theSmartKey toposi tion 2in the
ignitio nlock.
X Press transmitterbutton s; and ?.
The indicator lamplights upyellow .
X Press andhold trans mitterbutton s;
and ?until theindicator lampturns green. i
Make
surethatyouclear thememory of
the integr atedgarage dooropener before
selling thevehicle. Compass
Calling upthe compass Infor
mation onoperating thecompass canbe
found inthe separate COMAND operating
instr uctions. Floo
rmats G
WARNIN
G Whenever
youareusing afloormat, makesure
there isenough clearance andthat the
floormat issecurely fastened.
The floormat shouldalwaysbe securely
fastened usingthefastenin gequipment .
Befor edriving off,chec kthat thefloormat is
securely inplace andadjust itifnec essary. A
loose floormat couldslipand hinder proper
func tioningofthe pedals.
Do not place several floormat son top ofeach
other asthis may impair pedalmoveme nt. Floorm
aton the driver' sside (example)
X Driver's seat/front-passenger seat:
slide therespect iveseat back.
X Rear seats: slidetherespect iveseat
forwards.
X To install: placethefloormat inthe
foot well.
X Press studs:ontoretain ers;.
X To rem ove: pullthefloormat off
retain ers;.
X Remove thefloormat . 308
Featur
esStowing and features