display MERCEDES-BENZ S-Class 2013 W221 Service Manual

Assigning the programmable button
(favorites)
0002
Programmable button
You can assign the following predefined
functions to the 0033programmable button:
R ECO :y
ou can activate or deactivate the ECO
start/stop function.
R Massage, Driver's Seat :y
ou can switch
the massage function for the driver's seat
on and off.
R Massage, Front Passenger's Seat :
you can switch the massage function for
the front-passenger seat on and off.
R Massage, Driver's and Front Passenger's Seat : you can switch the
massage function for the driver's and front-
passenger seats on and off.
R Display OFF : you can switch the
COMAND display off or on.
R Tow-away Alarm : you can arm or
deactivate the tow-away alarm.
R Interior Motion Sensor :y
ou can arm or
deactivate the interior motion sensor.
R Tow-away Alarm and Interior Motion
Sensor :y
ou can arm or deactivate the tow-
away alarm and the interior motion sensor.
R Repeat Navigation Command :y
ou can
have the most recent recommendation by
the navigation system repeated.
X To assign the programmable button:
select Vehicle by sliding
001C0006and turning 0031001C0032
the COMAND controller and press
0021 to confirm.
X Select System and press
0021to confirm.
X Select Favorites Button and press
0021to
confirm.
The list of predefined functions appears.
The 002Cdot in front of the list entry indicates
the current setting.
X To change the setting: turn0031001C0032 the
COMAND controller and select the desired
function.
X To store the setting and exit the menu:
press 0021the COMAND controller.
Telephone keypad 0002
Telephone keypad
0003 Folding cover 124
At
ag lanceCOMAND

COMAND display
Display overview
The COMAND display shows the function currently selecte
dand its associated menus. The
COMAND display is divided into several areas.
The radio display is shown in the example. 0002
Status bar
0003 To call up the audio menu
0026 Main functio nbar
0025 Display/selectio nwindow
0023 Radio menu bar
0024 Air-conditioning function bar
Status bar 0002shows the current settings for radio and telephone operation.
The main functions navigation, audio, telephone and video feature additional menus. This is
indicated by triangle 0003.The following table lists the available menu items.
Main function bar 0026allows you to call up the desired main function.
In the example, the Audio main function is set to radio mode and display/selection
window 0025is active.
Radio menu bar 0023allows you to operate the radio functions.
The air-conditioning functions can be operated in air-conditioning function bar 0024.
Menu overview
The table lists the menus available after calling up the main navigation, audio, telephone, video
or system function in the main function bar. At
ag lance
125COMAND Z

Navi Audio Telephone Video Vehicle
Mode FM/AM radio Video DVD ECO
Map orientation Sat radio AUX Multicontour
seat/lumbar
settings
Point of interest
symbols on the map Disc Video off Rear window
blind
Traffi
csymbols on the
map Memory card EASY-ENTRY/
EXIT system
Text information on
map MUSIC
REGISTER Exterior
lighting
delayed
switch-off
000A
Topographical
map Media
Interface Interior
lighting
delayed
switch-off
000A
City view USB Ambient
lighting
000A
Freeway
information Rear 000A
Automatic
mirror fold-in
function 000A
Volume reduction AUX 000A
Locator
lighting SIRIUS service Audio off 000A
Automatic
locking Map version 000A
Interior
motion sensor 000A
Tow-away
alarm 000A
Trunk lid
opening height
restriction SPLITVIEW
SPLITVIEW allows you to simultaneously use
different COMAND functions on the front-
passenger side and on the driver's side.
Depending on the viewing angle of the display
(from the driver's seat or from the front-
passenger seat), you will see two different
displays.126
At
ag lanceCOMAND

For example, the "Navi" function can be used
from the driver's side while the "Video"
function is used on the front-passenger side.
Use the remote control to operate COMAND
from the front-passenger side with
SPLITVIEW.
Please bear the following in mind
R You rvehicle may be equipped with
SPLITVIEW, depending on its date of
production. The use of SPLITVIEW is
currently not permitted in the following
states: AL, AZ, CO, IL, LA, MA, MD, NH, PA,
VA, VT, WA, WI, and WV or in the Canadian
provinces of Manitoba, Newfoundland,
New Brunswick, and Prince Edward Island.
It is the driver's responsibility to observe
ALL regional legally prescribed regulations.
If your vehicle is registered in a state or
province in which SPLITVIEW is not
approved, this function must be
deactivated. Please contact an authorized
specialist dealer to chec kwhether
SPLITVIEW is approved in your state or
province.
R Volume adjustment for the cordless
headphones can be carried out on the
headphones. Before putting on the
headphones, make sure that the volume
has not been set too high.
R The remote control can be used for the
volume adjustment of corded headphones.
R You can only use media from the driver's
and front-passenger sides separately if the
media are from different sources. Example:
on the driver's side, an audio CD is being
played by the DVD changer. This means
that on the front-passenger side, the DVD
changer cannot be used to play a different
disc type, for instance a video DVD.
However, other media can be used at the
same time on the front-passenger side,
including radio, memory card, MUSIC
REGISTER, Media Interface, USB or AUX.
R If you use the same medium on both sides,
settings for this medium can be carried out
from either side. R
There must be intervisibility between the
headphones and the display so that
COMAND can optimally transmit music and
speech via the infrared signal on the front-
passenger's headphones. For this reason,
please also observe that the headphones
have left and right sides, and use them
correctly.
R Only entertainment functions, i.e. audio
and video, can be used separately via
SPLITVIEW.
R The multifunction steering wheel can only
be used for functions which relate to the
driver's side.
Switching SPLITVIEW on/off X
To switch on SPLITVIEW: select
Vehicle from the main function bar by
turning 0031001C0032the COMAND controller and
press 0021to confirm.
The "Vehicle" menu appears.
X Select SPLITVIEW ON .
SPLITVIEW symbol 0002appears in the
display, and display 0003switches to
SPLITVIEW OFF .
X To switch off SPLITVIEW: select
Vehicle from the main function bar by
turning 0031001C0032the COMAND controller and
press 0021to confirm.
The "Vehicle" menu appears.
X Select SPLITVIEW OFF .
Display 0003switches to SPLITVIEW ON .
i If COMAND has already been switched
on, you can also use the remote control to At
ag lance
127COMAND Z

switch SPLITVIEW on and off
(Y
page 129).
The SPLITVIEW screen remains on for
approximately 30 minutes after the SmartKey
has been turned to position 0in the ignition
lock. After this time or after the SmartKey has
been removed, the settings on the front-
passenger side are saved for approximately
30 minutes longer. After this period,
reactivation on the front-passenger side
means that the settings from the driver's side
will be used.
Cordless headphones for the front
passenger There are different cordless headphones for
the front passenger and the rear
compartment.
The cordless headphones for the front
passenger can be identified by SPLITVIEW
symbol
0002on the headband.
The cordless headphones for the front
passenger cannot be used in the rear
compartment.E qually, the headphones for
the rear compartment cannot be used by the
fron tpassenger.
Swiveling the COMAND displa yand
setting the brightness You can swivel the COMAND display
5
.T he
buttons are located beside the COMAND
display. Swiveling
0002
To swivel the display to the left
0003 To swivel the display to the right
Setting the brightness 0002
Brightness of the instrument cluster
lighting
0003 Brightness of the COMAND display
Brighter or dimmer:
X Turn control 0002or0003 clockwise or counter-
clockwise.
i If Night View Assist Plus is activated, only
the brightness of the multifunction display
is adjusted with control 0002.
Display design
When the default settings are selected, the
display automatically switches between day
design and night design.
You can change these settings using
COMAND (Y page 147).
5 Not with SPLITVIEW. 128
At
ag lanceCOMAND

Cleaning instructions
!
Do no ttouch the COMAND display .The
display has a very sensitive high-gloss
surface; there is a risk of scratching. If you
have to clean the screen, however, use a
mild cleaning agent and a soft, lint-free
cloth.
The display must be switched off and have
cooled down before you start cleaning. Clean
the display screen, when necessary, with a
commercially available microfiber cloth and
cleaning agent for TFT/LCD displays. Then,
dry the surface with a dry microfiber cloth.
Avoid using alcoholic thinners, gasoline or
abrasive cleaning agents. These could
damage the display surface. Do not apply
pressure to the display surface when cleaning
it, as this could cause irreversible damage. Remote control
Overview You can use the remote control to operate the
COMAND display, SPLITVIEWa nd either one
of the rear-compartment screens. 0002
To switch the screen on/off (Rea rSeat
Entertainment System only)
0003 To switch the button lighting on/off 0026
To select the screen for remote control
operation (COMAND ,SPLITVIEW ,L
REAR and REAR Rcan be selected)
0025 To select a menu or menu item
0023 To confirm a selection or setting
0024 Mute
0014 To adjust the volume (for corded
headphones only)
0015 COMAND: to set the station, skip track,
fast forward/rewind, for example. Rear
Seat Entertainment System: skip track,
fast forward/rewind
0016 COMAND: to select a station from
presets, select a track, enter directly,
enter a phone number, for example. Rear
Seat Entertainment System: to select a
track, enter directly
0017 To exit a menu (back)
X Point the remote control at the
corresponding screen and execute the
functions by pressing the corresponding
buttons.
i The remote control's function may be
restricted depending on the angle at which
it is pointed at the respective screen.
Selecting the screen for the remote
control X
Turn thumbwheel 0026until the desired
display is highlighted in the window.
Switching the screen on/off (Rear Seat
Entertainment System only) If the SmartKey is in the ignition lock in
position
0or 1or if the SmartKey is not in the
ignition lock, the rear screens will switch off
after 30 minutes. Before the screens switch
off, they show a message to this effect.
You can switch the screen sback on.
However, this will discharge the starter
battery. At
ag lance
129COMAND Z

Functions with the
0001 and
0002 button
You can use the remote control to execute the same functions as the COMAND control panel.
Mode Function
Audio mode Selects a station using th
estation search functio n(Ypage 216) Selects a track by skipping to a track (Y
page 229)Fast forward/rewind (Y
page 230)Video mode Selects a scene or chapter (video DVD mode) (Y
page 247)Fast-forward/rewind (video DVD mode) (Y
page 247)Functions of the number keypad
You can use the remote control to execute the same functions as the COMAND control panel.
Mode Function
Audio mode Selects stations via the station presets (Y
page 216)Sets stations by entering the frequency manually (Y
page 217)Stores stations manually (Y
page 217) Selects a track (Y
page 229) Selects a data medium via the media list (Y
page 228)Telephone mode Telephone number entry (Y
page 204)Character entry Enters characters (direct entry) (Y
page 134)Operating COMAND
Selecting amain function Initial situation
You would like to change from the telephone
menu to the vehicle settings, for example.
X Slide 002A001Cthe COMAND controller and
switch to the main function bar.
X Select Vehicle in the mai
nfunction bar by
turning 0031001C0032the COMAND controller and
press 0021to confirm.
The "Vehicle" menu appears. 0002
"Vehicle" menu
0003 Display/selection window At
ag lance
131COMAND Z

Calling up the audio function
X
Select Audio in the main function bar by
sliding 002A001Cand turning 0031001C0032the COMAND
controller and press 0021to confirm.
The basic display of the curren taudio
operating mode, e.g. audio CD, appears. Switching to radio mode
Option 1
X
Press the 0010function button.
The radio display appears.
i Repeated pressing of this function button
switches between radio and th emost
recently active audio source.
Option 2
X Select Audio again by sliding
002A001Cthe
COMAND controller and press 0021to
confirm.
The Audio menu appears. 0002
Current audio operating mode
0003 Main function bar
0026 Audio menu
X Press 0021the COMAND controller and
confirm Radio .
The radio basic display appears with the
waveband last selected. X
To set the station: if the display/selection
window is activated in the radio display,
turn 0031001C0032 or slide 003C001C003DCOMAND
controller.
Entering characters in navigation mode
(entering acity) General information
Character entry is explained in the following
sections using
NEW YORK as an example for
entering a city.
If you want to use the address entry menu
(Y page 157) to enter a city, a street or a
house number, for example, COMAND
provides either a list with a character bar
(optio n1) or a selection list (option 2). At
ag lance
133COMAND Z

You can enter the characters using either the
character bar or the number keypad. In the
selection list, you selec
tanentry to copy it to
the address entry menu.
Option 1: city list with character bar
X Call up the city list with character bar
(Y page 157).
The alphabetically sorted city list shows the
first available entries. Entering characters using the character
bar
X
Select N by turning COMAND controller
0031001C0032 and confirm with 0021.0002
N character entered by user
0003 ANTICOKE characters automatically
added by COMAND
0026 Listentry tha tmost closely resembles the
current entry by the user
0025 To switch to the selection list
0023 To delete an entry
0024 Characters not currently available
0014 Characters currently available 0015
Currently selected character
0016 Character bar
0017 To cancel an entry
0018 List
The list 0018shows all available town names
beginning with N .T
he list entry that is best
suited to previous user entries is always
highlighted in the first position 0026,
NANTICOKE in the example.
All characters that have been entered are
displayed in black, the letter N in the
example 0002.The letters that are added
automatically by COMAND are displayed in
gray 0003,ANTICOKE in the example.
Character bar 0016shows the letters still
available for selection in black 0014.These can
be selected; in the example, the letter O is
highlighted 0015.Which characters remain
available depends on the characters already
entered by the user and on the data stored in
the digital map. Characters that are no longer
available are shown in gray 0024.
X Select E ,
W , space,
Y in order and confirm
each with 0021. Entering characters using the number
keypad
X
Press the telephone keypad's number key
0036 twice in quick succession, to enter
the letter N .
The character appears at the bottom of the
display when the key is pressed. The first
available letter is highlighted. 134
At
ag lanceCOMAND

You see which characters you can enter with
that key. Each time the key is pressed, the
nex tcharacter is selected.
Example: key 0036:
R press once = M
R press twice =N
R press three times =O
X Wait until the character display goes out.
The entries matching your input are shown
in the list.
X Enter E ,
W , space,
Y with the corresponding
keys.
i The space is entered using number key
0004.
Further functions in the list with
character bar
X To delete characters: select0004by sliding
001C0006 and turning 0031001C0032the COMAND
controller and press 0021to confirm.
X To delete an entry: select0004and press
and hold 0021the COMAND controller until
the entire entry has been deleted.
X To switch the character set: select
001D and press 0021to confirm.
X To cancel an entry: select the0002symbol
in the bottom left of the character bar and
press 0021to confirm.
or
X Press the 0001back button.
The address entry menu appears.
X To accept the first list entry: press and
hold 0021the COMAND controller until the
address entry menu appears.
The accepted list entry is shown there.
Calling up the list as aselection list
Select the desired city fro mthe selection list.
If there are several entries for a city or if
several cities of the same name are stored,
then 0003 is highlighted in the character bar.
X Press 0021the COMAND controller. It is also possible to switch the city list to the
selection list at any time during character
input.
X Slide 0021the COMAND controller
repeatedly until the city list appears as a
selection list.
or
X Select 0003in the character bar by turning
0031001C0032 the COMAND controller and press
0021 to confirm.
Option 2: city list as selection list
COMAND either shows the selection list
automatically or you can call up the selection
list from the list with character bar.
The example shows the selection list after the
city NEW YORK has been entered. The entry is
highlighted automatically. X
Confirm NEW YORK with COMAND
controller 0021.
The address entry menu appears. You can
now enter a street, for example. At
ag lance
135COMAND Z