clock MERCEDES-BENZ SPRINTER 2019 MY19 with Base Radio Operator’s Manual

#
Using thel ug wrenc hfromt hevehicle tool kit,
unscr ewthen ow visible bolts counter-clock‐
wise byappr oximatel y20turns. #
Slightly raise spar ewheel car rier 4 and
unhook left-hand saf etyh ook 3. #
Assemble thep um pleve rfor thej acka nd
slide it int osleeve5 onther ight-ha ndside
of spar ewheel car rier 4. #
Raise spar ewheel car rier 4 withthe pump
le ve ra nd unhook right-han dsafet yh ook 3. #
Slowl ylow er spar ewhee lcarrier 4 tothe
ground. #
Lift spar ewheel car rier 4 slightl yand pull
th ep um pleve rout of thes lee ve. #
Use thep um pleve rtol iftt he spar ewheel
be yond ther ear edg eofsparew heel car rier
4. #
Carefully remo vethes par ew heel from spare
wheel car rier 4.T he spar ewheel is heavy.
When thes par ew heel is remo ved, thec enter
of gr avity changes due totheh eavy weight of
th ew heel. The spar ewheel ma yslip down or
tip ove r.
Ve hicles with rear wheel drive: installin gthe
spar ewheel (Cargo Van/Passenger Van) #
Carefully place thes par ew heel ont ospare
wheel car rier 4.T he spar ewheel is heavy.
When youp lacethe spar ewheel ont ospare
wheel car rier 4,t he center of gravity
ch anges due tothew eight of thew heel. The
spar ewheel ma yslip down or tip over. #
Slide thep um pleve rfor thej acki ntos leeve
5 on spar ewheel car rier 4. #
Raise spar ewheel car rier 4 withthe pump
le ve ra nd attac hright-ha ndsafetyh ook 3. #
Slight lyraise spar ewheel car rier 4 and
attac hleft-hand saf etyh ook 3. #
Pull thep um pleve rout of slee ve5 . #
Using thel ug wrench, tighten saf etyh ook
bolts 3byturning them clockwise. #
Replace and engag ecovers 1. #
Close ther ear-end doors. Ve
hicles with rear wheel drive: removing the
spar ewheel (vehicl ewithl ow ered chassis) Bolt co
vers fort he saf etyh ooks (exa mp le: Cargo
Va n) #
Ope nthe rear-en ddoors. 234
Wheel sand tires

#
Place ascrew driver int orecesses 2and
th en pr yoffco vers 1 . #
Using thel ug wrenc hfromt hevehicle tool kit,
unscr ewthen ow visible bolts counter-clock‐
wise byappr oximatel y20turns. #
Slightly raise spar ewheel car rier 4 and
unhook left-hand saf etyh ook 3. #
Assemble thep um pleve rfor thej acka nd
slide it int osleeve5 onther ight-ha ndside
of spar ewheel car rier 4. #
Raise thes par ew heel car rier wit hthe pump
le ve ra nd unhook right-han dsafet yh ook 3. #
Position loop 7ofextraction device 6on
th es par ew heel so that youw ill later be able
to attac hlug wrench 8. #
Prepar ethe jac k. #
Place thej ackb eneat hthe cor responding
jac ksuppor tpoint. #
Movethep um pleve rupa nd down until the
tir eisr aised amaximum of 1.18 in (3 cm) off
th eg round. #
Hook lug wrench 8intoloop 7ofextrac‐
tio nd evice 6 onthes par ew heel. #
Carefully remo vethes par ew heel from spare
wheel car rier 4.T he spar ewheel is heavy.
When thes par ew heel is remo ved, thec enter
of gr avity changes due totheh eavy weight of
th ew heel. The spar ewheel ma yslip down or
tip ove r. #
Remo vethes par ew heel extraction device
and stor eitinas afep lace. Youc an now
ins tallth es par ew heel to yo urvehicle. #
Lowe rthe vehicle.
Ve hicles with rear wheel drive: installin gthe
spar ewheel (vehicle with lo weredc hassis)
% In
thee vent of aflat tire, youm aystor et he
defectiv ewheel inside thev ehicle only .An
intact wheel ma ybestore dint he spare
wheel car rier onl ywhen thev ehicle is unla‐
den. Aladen vehicle mus tfirst be raised. #
Carefull yplace thes par ew heel ont ospare
wheel car rier 4.T he spar ewheel is heavy.
When youp lacethe spar ewheel ont ospare
wheel car rier 4,t he center of gravity
ch anges due tothew eight of thew heel. The
spar ewheel ma yslip down or tip over. #
Slide thep um pleve rfor thej acki ntos leeve
5 on spar ewheel car rier 4. #
Raise spar ewheel car rier 4 withthe pump
le ve ra nd attac hright-ha ndsafetyh ook 3. #
Slight lyraise spar ewheel car rier 4 and
attac hleft-hand saf etyh ook 3. #
Pull thep um pleve rout of slee ve5 . #
Using thel ug wrench, tighten saf etyh ook
bolts 3byturning them clockwise. #
Replace and engag ecovers 1. #
Close ther ear-end doors.
Ve hicles with rear wheel drive: removing the
spar ewheel (chassis) #
Loosen wing nuts 3manually and then
re mo vethem. #
Loosen nuts 2asfarast hethre ad end. #
Slightly raise spar ewheel car rier 4 and
unhook left-hand saf etyh ook 1. #
Assemble thep um pleve rfor thej acka nd
slide it int othe slee veon ther ight-ha ndside
of spar ewheel car rier 4. #
Raise spar ewheel car rier 4 withthe pump
le ve ra nd unhook right-han dsafet yh ook 1. #
Slowl ylow er spar ewhee lcarrier 4 tothe
ground. #
Lift spar ewheel car rier 4 slightl yand pull
th ep um pleve rout of thes lee ve. #
Use thep um pleve rtol iftt he spar ewheel
be yond ther ear edg eofthe spar ewheel car‐
ri er. #
Carefully remo vethes par ew heel from the
spar ewheel car rier .T he spar ewheel is heavy.
When thes par ew heel is remo ved, thec enter
of gr avity changes due totheh eavy weight of
th ew heel. The spar ewheel ma yslip down or
tip ove r. Wheels and tires
235