ECU MERCEDES-BENZ SPRINTER 2020 MY20 with 7” screen

#
Nevertouc hthe danger zone sur round‐
ing movin gcomponent parts ,e.g.t he
ro tatio na reaoft hefan. #
Remo vejewe lrya nd watches. #
Keep items of clo thing and hair away
from moving parts. &
WARNING Risk of bu rnsf romh otcom‐
ponent parts in thee ngine compartment
Cer tainc omponents in thee ngine compart‐
ment can be very hot, e.g. thee ngine, the
ra diator and parts of thee xhau stsystem. #
Allowthe engine tocool down and only
to uc hc omponent parts desc ribed in the
fo llowing. If
yo uh ave tocar ryout an yworkint he engine
compartment, touc ho nlyt he following compo‐
nents:
R Hood
R Engine oil filler openin gcap
R Washer fluid reser voir cap
R Coolant expansion reser voir cap #
Open theh ood (/ page214). #
Remo vedirtfromw ater drain valve 2 of air
intak ebox1 . Draining
thef uel filter &
WARNING Danger of fire and explosion
due tofuel
Fu els ar ehighly flammable. #
It is essential toavoid fire ,o pen flames,
smokin gand creating spar ks. #
Befor efilling up, switc hoffthee ngine,
and, if applicable, thea uxiliar yheating. &
WARNING Risk offire and explosion due
to fuel
Fu els ar ehighly flammable. Ther eisarisk of
fi re and explosion due tocontact wi thhot
component parts. #
Allowthe engine and thee xhau stsys‐
te mtoc ool down. *
NO
TEEngine damag eduetodela yed
drainag eofthe fuel filter Ve
hicles with adiese lengine: delayed
drainag eofthe fuel filter can lead toengine
damage.
If the 003A indicator lam plights up, drain the
fuel filter immediately. +
ENVIRONMENTAL
NOTEEnvironmental
pollution du etodisposal in anon-envi‐
ro nmental ly-friendly manner #
Dispose of thew ater/fuel mixtur einan
environmentally-friendly manner. OM642 engine
#
Park thev ehicle in asafel ocation and secure
it agains trolling away. #
Switc hoffthea uxiliar yheating
(/ page106). #
Switc hoffthee ngine. #
Open theh ood (/ page214). Maintenance and care
221

Obser
vethea dditional following point sduring
st artin gassistance:
R Startin gassis tance ma yonly be pr ovided
using batteries wit hanominal voltag eof12V
R The vehicles mus tnot to uche acho ther
R Vehicles with agasoline engine: only per‐
fo rm startin gassis tance when thee ngine and
ex haus tsyst em ar ecold #
Vehicles with abatter ymain switch: check
whe ther theb atter ymain switc hisinserted
( / pag e120) #
Secur ethe vehicle using thep arking brake. #
Vehicles with automatic transmission:
shif tthe transmission toposition 005D. #
Switc hoffthei gnition and all electrical con‐
sumers. #
Open theh ood (/ page214). Example
:jump-s tart connection
% Right-hand driv
evehicle: thej ump-s tart
connection ma ybeonthe opposit eside. #
Remo vethec ove rfromt he positiv eterminal
on thed onor batter y. #
First,c onnec tthe positiv eterminal clam pof
th ej umper cables/charging cables tothe
positiv eterminal of theo ther vehicle's bat‐
te ry. #
With positiv eterminal clamp 2ofthe
jumper cable/charging cable ,slide ther ed
pr otectiv ecap on jump-s tarting connection
1 bac kwithac lockwise turn. #
Connect theo ther positiv eterminal clam pto
th ep ositiv eterminal of jump-s tart connection
1. #
During starting assistance: star tt he engine
of thed onor vehicle and le titrun at idle
speed. #
Firs t, connect then egativ eterminal clam pof
th ej umper cable/charging cable tothen ega‐
tiv ep ole of thed onor batter y. #
Connec tthe other negativ eterminal clam pof
th ej umper cable/charging cable toag round
po int on your ow nv ehicle (a bar emetal part
in thee ngine compartment). #
During starting assistance: star tt he engine
on your ow nv ehicle. #
When charging: star tt he chargin gprocess. #
During starting assistance: lett he engine
ru nf or afew minutes. #
During starting assistance: beforediscon‐
necting thej umper cable, switc honanelec‐
trical consumer on your ow nv ehicle, e.g. the
re ar wind owheater or lighting.
When thes tartin ga ssis tance/charging proces sis
comple te: #
Remo vethej umper cables/charging cables
in reve rseo rder:first then egativ eclam pfrom
th eg round point in thee ngine compartment,
th en then egativ eclam pfromt he donor bat‐
te ry.T he nt he positiv eclam pfromt he posi‐
tiv et erminal of jump-s tart connection 1,
th en thep ositiv eclam poft he donor batter y.
The redp rotectiv ecap springs bac ktoits ini‐
tial position when positiv eterminal clamp 2
is disconnected from jump-s tarting connec‐
tion 1.
Yo uc an obtain fur ther information at aqualified
specialis tworks hop. Installing/removing
thef loor co vering (vehi‐
cles with rear wheel drive) &
WARNING Risk of accident du eto
object sinthe driver's foot we ll
Object sinthe driver's foot we ll ma yimp ede
pedal tr avel or bloc kadepressed pedal.
This jeopardizes theo perating and road
saf etyoft hevehicle. #
Stow all object sinthevehicle securely
so that they canno tget intot he driver's
fo ot we ll. Breakdown assis
tance 233

Pe
rm issible towing me thods Bo
th axle sont he
gr ound Fr
ont axle raised Re
ar axle raised
Ve hicles wit hauto‐
matic transmission and
re ar-wheel drive Ye
s, no fur ther than
31 miles (50 km) at
31 mp h(50 km/h) Ye
s, no fur ther than
31 miles (50 km) at
31 mp h(50 km/h) Ye
s, if thes teering
wheel is fixe dint he
center position wit ha
st eering wheel lock
Ve hicles wit hall-wheel
drive Ye
s, no fur ther than
31 miles (50 km) at
31 mp h(50 km/h) No
NoTo
toww ithar aisedaxle: towing should be per‐
fo rm ed byatow ing compan y. To
wing away thev ehicle wit hbotha xleson
th eg round #
Obser vethen otes on permissible towing
me thods (/ page236). #
Mak esuret hat theb atter yisc onnected and
ch arge d.
When theb atter yisd ischar ged, thef ollowing sit‐
uations occur:
R The engine canno tbestarted.
R It is no tpossible torelease or appl ythe elec‐
tric parking brake.
R Vehicles with automatic transmission: the
automatic transmission canno tbeshiftedto
position 005Cor005D.
* NO
TEDama gedue to to wing away at
exc essivel yhigh speeds or overlong dis‐
ta nces The driv
etra in could be damaged when towing
at exc essively high speeds or over long dis‐
ta nces. #
Atow ing speed of 30 mph(50 km/h)
mus tnotbe exc eeded. #
Atow ing distanc eof30miles (50 km)
mus tnotbe exc eeded. %
Ve
hicles with automatic transmission
and rear wheel drive: ifth er eisam alfunc‐
tion, thea utomatic transmission ma ybe
loc kedinp osition 005D. If
th ea utomatic transmission cann otbe shif‐
te dtop osition 005C,transpor tthe vehicle
(/ page239). Atow ing vehicle wit hlifting
equipment is requ ired forv ehicle transport. &
WARNING Risk of accident whe ntow ing
av ehicle whic histoo heavy
If th ev ehicle being tow- star tedort owed
aw ay is heavier than thep ermissible gross
mass of your vehicle, thef ollowing situations
can occur:
R The towing eyem aybecome de tach ed.
R The vehicle/trailer combination may
swer veoreve noverturn. #
If ano ther vehicle is tow- star tedor
to we da way,its weight mus tnotexc eed
th ep ermissible gross mass of your own
ve hicle. If
av ehicle needs tobe towe dort ow st arted, its
we ight should no tbegreater that thep ermissible
gross mass of thet ow ing vehicle. #
Information on thev ehicle's permissible gross
mass can be found on thev ehicle identifica‐
tion plat e(/pag e274). #
Vehicles with automatic transmission: do
no to pen thed rive r's or co-driver door ,asthe
automatic transmission will automatically
shif ttop osition 005D. #
Installth et ow ing eye( /pag e240). #
Secur ethe towing device. Breakdown assis
tance 237

*
NO
TEDama gedue toincor rect connec‐
tion of thet ow bar #
Onlyconnec tthe towr ope or towb arto
th et ow ing eyes. %
Yo
uc an also secur ethe towing devic etothe
trailer hitch.
* NO
TEDama geand risk of accident when
to wing wit hatow ro pe Ther
eisar isk of an accident if youdon ot
obse rves afet ya nd pr otectiv emeasures when
to wing using atow ro pe.
Obser vethef ollowing points when towing
wit hat ow ro pe: #
Secur ethe towr ope on thes ame side
on bo thvehicles, if possible. #
Mak esuret he towr ope does not
exc eed thel egally prescribed length. #
Mar kthe towr ope in them iddle, e.g.
wit haw hitec loth (30 x30c m). This
makes other road user sawarethat a
ve hicle is being towe d. #
Obser vetheb rake lamps of thet ow ing
ve hicle while driving. Alw aysm aintain a
dis tance that ensures thet ow ro pe does
no ts ag. #
Do no tuse steel cables or chains to tow
yo ur vehicle. Otherwise, youc oul dd am‐
ag et he vehicle. #
Deactivat eautomatic locking (/ page50). #
Do no tactivat ethe HOLD function. #
Deactivat ethe tow- aw ay alar m(/pag e62). #
Deactivat eActiv eBrake Assi st (/ pag e150). #
Vehicles with automatic transmission:
shif tthe automatic transmission toposition
005C. #
Release thep arking brake. &
WARNING Risk of accident du etolimi‐
te ds afet y-re lated function sduring the
to wing process
Saf ety-re lated function sarelimited or no lon‐
ge ra vailable in thef ollowing situations:
R thei gnition is switched off.
R theb rake system or po wersteering sys‐
te mism alfunctioning.
R thee nergy suppl yorthe on-boar delectri‐
cal sy stem is malfunctioning.
When your vehicle is then towe da way,signifi‐
cantly mor eeffor tm aybe requ ired tosteer
and brak ethan is normally required. #
Use atow bar. #
Mak esuret hat thes teering wheel can
mo vefreely ,befor etow ing thev ehicle
aw ay. *
NO
TEDama gedue toexc essiv etractive
po wer If
yo up ullaway sharpl y,thet ractiv epower
ma ybet oo high and thev ehicles could be
damaged. #
Pull away slowl yand smoo thly. To
wing avehicle wit hthe front or rear axle
ra ised *
NO
TEDama gewhen thei gnition is
switched on If
yo ul eave thei gnition switched on when
to wing thev ehicle wit hthe front or rear axle
ra ised, ESP ®
actuation can damag ethe brake
sy stem. #
The ignition mus tbeswitched off. *
NO
TEDama gedue toincor rect remo val
or ins tallation of thep ropeller shafts When ins
talling thep ropeller shafts, they can
be damaged if youdon otuse ne wscrew s.
Alw aysu se ne wscrew sw hen ins talling the
propeller shafts.
Onl yhave thep ropeller shafts ins talled or
re mo vedbyq ualified, skilled personnel. 238
Breakd owna ssis tance

%
If
th ef ront axle is damaged, raise thev ehicle
at thef ront axle and if ther ear axle is dam‐
aged, raise thev ehicle at ther ear axle.
% Ve
hicles with automatic transmission
and rear-wheel drive: ifth er eisam alfunc‐
tion, thea utomatic transmission ma ybe
loc kedinp osition 005D.
If th ea utomatic transmission cann otbe shif‐
te dtop osition 005C,transpor tthe vehicle
(/ page239). Atow ing vehicle wit hlifting
equipment is requ ired forv ehicle transport. #
Obser vethen otes on permissible towing
me thods (/ page236). #
The propeller shafts tothed rive axles must
be remo vedift he maximum permissible tow‐
ing dis tance is exceeded. #
Vehicles with automatic transmission:
shif tthe automatic transmission toposition
005C. #
Release thep arking brake. #
Switc hoffthei gnition. Loading
thev ehicle fort ransport #
Obser vethen otes on permissible towing
me thods (/ page237,238). #
Connect thet ow bar tothet ow ing eyetol oad
th ev ehicle. #
Vehicles with automatic transmission:
shif tthe automatic transmission toposition
005C.
% Ve
hicles with automatic transmission: in
th ee vent of damag etothe electrics, the
automatic transmissio nmaybe loc kedin
position 005D.Toshifttop osition 005C,provide
th eo n-boar delectrical sy stem wit hpower
( / pag e231). #
Load thev ehicle ont othe transpor ter. #
Vehicles with automatic transmission:
shif tthe automatic transmission toposition
005D. #
Use thep arking brak etosecurethe vehicle
agains trolling away. #
Only secur ethe vehicle bythew heels. Ve
hicles with all-wheel drive/vehicles with
automatic transmission #
Mak esuret hat thef ront and rear axle scome
to rest on thes ame transpor tatio nv ehicle.
* NO
TEDama getothed rive trai ndueto
incor rect positioning #
Do no tpositio nthe vehicle abo vethe
connection point of thet ranspor tvehi‐
cle. *
NO
TEVehicle damag eduetoimproper
loading An all-wheel driv
evehicle ma ybedamaged if
it is tilted, pushed or mo vedw hile being loa‐
ded using ahydraulic plat form. #
When loading avehicle wit hall-wheel
drive, thev ehicle should onl ybemoved
and positioned byits ownp owe r. #
The vehicle and thes urface it is posi‐
tione dons hould no longer be mo ved
when thek eyisremo vedorift he door
is open. To
wing eyes torage location The
towing eyeisl ocated in thev ehicle tool kit in
th ef ront-passen gerfootwell (/ page241). Breakdown assi
stance 239

*
NO
TEDama geor malfunction scaused by
moisture Moistur
emaycause dama getothee lectrical
sy stem or cause it tomalfunction. #
When thef use bo xisopen, mak esure
th at no moistur ecan enter thef use box. #
When closing thef use box, mak esure
th at thes eal of thel id is positioned cor‐
re ctly on thef use box. If
th en ew fuse whic hhas been inser teda lso
blo ws,have thec ause traced and rectified at a
qu alified specialis tworks hop.
Mak esureoft hefollowing befor ereplacing a
fuse:
R thev ehicle is secured suc hthat it does not
ro llaw ay
R all electrical consume rsares wit ched off
R thei gnition is switched off
The fuses ar elocated in various fuse bo xes:
R fuse bo xinthe front-passenger foot we ll
(/ page241 )
R fuse bo xinthe seat base of thed rive r's seat
(/ page241 ) Opening
thef useb oxinthes eat base of the
dr iver's seat #
Toopen: press down and unclip fasteners 1
on thec over. #
Remo vethec ove r. #
Toclose: pressthec over firm ly in tothes eat
base until fasteners 1clip in. Opening and closing
thef useb oxinthec o-
driver's foot we ll Opening
thef useb ox #
Unlocking andremoving thes towa ge com‐
partment co verint he co-driver's foot we ll
(/ page242). Example
:vehicle tool kit insert #
Liftthe inser tatmarke dp ositions 1. #
Pull thei nser tout of clips 2.
Closing thef useb ox #
Slide thei nser tint oc lips 2. #
Close thei nser tbyp ressing on mar kedp osi‐
tions 1. #
Put on thes towa ge compartment co verint he
co-d rive r's foot we ll and loc kit(/pag e242). Ve
hicl etool kit Information on
thev ehicle tool kit The
vehicle tool kit is located in thes towa ge com‐
partment in thef ootwell on thef ront-passenger
side (/ page242).
The vehicle tool kit contains:
R atow ing eye
R ascrew driver wit hTorx, Phillips and slotted
bits
The vehicle tool kit ma yalso contain thef ollow‐
ing, fore xamp le:
R an open-en dwrench
R awheel wrench Breakd
owna ssis tance 241

Aspec
tratio: relationship between tir eheight
and tir ewidthinp ercent.
Ti re pressure: pressureinside thet irea pplying
an outwar dforce toeve rysquar einc hoft he
tire's sur face. The tir epressur eiss pecified in
pounds per squar einc h( psi), in kilopascal (kPa)
or in bar .The tir epressur eshoul donlybec orrec‐
te dw hen thet ires ar ecold.
Ti re pressur eoncoldt ires: thet ires ar ecold
when thev ehicle has been par kedw itht he tires
out of direct sunlight foratl east thre eh our sand
th ev ehicle has been driven less than 1m ile
(1.6 km).
Ti re contact sur face: thep artoft he tir ethat
comes int ocontact wi th theroad.
Ti re bead: thep urpose of thet ireb ead is to
ensur ethat thet ires its securel yonthe wheel
ri m. Ther eareseveralw irec ores in thet ireb ead
to preve ntthet iref romc hanging lengt honthe
whee lrim.
Sid ew all: thep artoft he tir ebetwe en thet read
and thet ireb ead.
Special equipment weight: thec ombined
we ight of those optional extras that we igh more
th an ther eplaced standar dparts and mor ethan
5l bs (2. 3kg). These optiona lextras ,suc has
high-pe rformance brakes, le velc ontrol sy stem, a
ro of luggag erackorah igh-perform anc ebatter y,
ar en otincluded in thec urb weight and the
we ight of thea ccessories.
TIN (Tir eIdentification Number): auniqu eiden‐
tification number whic hcan be used byatire
manufacturer toidentify tires, fore xamp lefora
product recall, and thus identif ythe pur chasers.
The TIN is made up of them anufacturer identifi‐
cation code, tir esize, tir etype code and them an‐
ufacturing date.
Load-bearing index: thel oad-bearing inde x(also
load index) is acode that con tains them aximum
load-bearing capacity of atire.
Tr action: traction is ther esult of friction between
th et ires and ther oad sur face.
We ar indicator: narrow bars(tread wear bars)
th at ar edistributed overthe tir etread. If thet ire
tread is le velw itht he bars, thew ear limit of
1/1 6in( 1.6m m) has been reached.
Distribution of vehicl eoccupants: distribution
of vehicle occupants over designated seat posi‐
tions in avehicle. Maximum permissible pa
yload weight: nomi‐
nal load and luggag eload plus 150lbs (68 kg)
multiplied bythen umber of seats in thev ehicle. Changing
awheel Note
sons electing, installing and replacing
tires Yo
uc an ask fori nformation rega rding permit ted
wheel/tir ecombinations at aqualified specialist
wo rkshop. &
WARNING Risk of accident du etoincor‐
re ct size sofwheels and tires
If wheels and tires of thew rong size ar eused,
th ew heel brakes or wheel suspension com‐
ponents ma ybedamaged. #
Alwaysr eplace wheels and tires with
ones that fulfill thes pecification softhe
original part.
Fo rw heels, pa yattention tothef ollowing:
R Designation
R Type
R Perm issible wheel load
R Wheel of fset
Fo rtires, pa yattention tothef ollowing:
R Designation
R Manufacturer
R Type
R Load-bearing index
R Speed rating &
WARNING Risk of inju rythro ugh exceed‐
ing thes pecified tir eload rating or the
permissible speed rating
Exceeding thes pecified tir eload rating or the
permissible speed rating ma ylea dtot ire
dama geand tothet ires bur sting. #
Therefore, onl yuse tir etypes and sizes
appr ovedfor your vehicle model. #
Obser vethet irel oad rating and speed
ra ting requ ired fory our vehicle. 260
Wheels and tires

Only use
them iddle roda nd thep um pleve rrod
wit hthe larges tdiame terf or thej ackasa lug
wrenc hextension. Only inse rtthem iddle rodon
th el ug wrench, and alw aysasf ar as it will go.
Otherwise, ther ods could bend and defor mso
muc hthat they can no longer be use daspump
le ve rs fort he jac k. #
Toprepar ethe hydrauli cjack: insertthe
th irdr od of pum plever 1fort he jac kinto
th el ug wrenc hextension. #
Close pressur erelease scr ew3. #
Todo this, use thef lattened sectio nonpump
le ver 1totur np ressur erelease scr ew3
clockwise tothes top.
% Do no
tturnp ressur erelease scr ew3 more
th an one or tw ofull turns .Hydraulic fluid
coul dotherwise escape. #
Inser tpum plever 1withthe larges trod into
th er eces sont he jac kand secur ebyturning
it clo ckwise. #
Place thej ackv erticall ybeneat hthe jac ksup‐
por tpoints described belo w. Jac
ksuppor tpoint, front axle Jac
ksuppor tpoint, rear axle (e xamp le:chassis
up to3.5 t) Jack
suppor tpoint, rear axle (e xamp le: Cargo
Va na nd Passenger Vanu pto4 .0 t) Wheels and tires
265

#
Tighten thew heel bolts or nuts evenlyint he
sequence indicated (1 to6 ).
Specified tightenin gtorque:
R Steel wheel bolts: 177l b-f t(24 0N m)
R Whee lnuts: 133lb-f t(18 0N m)
R Alloywheel bolts: 133lb-f t(18 0N m) #
Push thep isto nont hehydraulic jac kinagain
and close thep ressur erelease scr ew. #
Vehicles with all-wheel drive: turnthe jack
spindle clockwise as farasitw illg o.
% Yo
uc an no winstallth eh ub caps on steel
wheels wit hwheel bolts. The ins tallation pro‐
cedur edepends on whe ther theh ub cap acts
as atrimt hat co vers thew hole wheel, or just
co vers thec enter. #
Wheel with hub cap: positiontheo pening
fo rt he tir evalveint he hub cap overthe tire
va lve. #
Push thee dgeoft he hub cap ont othe wheel
ri mw ithb othh ands until it engages into
place. Mak esuret he hub cap retaining
cat ches engag eonthesteel wheel. #
Wheel with central hub cap: positionthe
re tainin glugs of thec ent ralh ub cap overthe
whee lbolts. #
Hitthem iddle of theh ub cap toengag eiton
th ew heel. #
Secur ethe faulty wheel in thes par ew heel
brac ket. #
Vehicles with Super Single tires: transport
th ef aulty rear wheel on thel oad area. The
re ar wheel is tool arge fort he spar ewheel
brac ket. #
Chec kthe tir epressur eoft he newl yins talled
wheel and adjus titifnecessar y. #
Retighten thew heel bolts or wheel nuts tothe
specified tightening torque af tert he vehicle
has been driven 31miles (50 km). #
When using awhee lors parew hee lwitha
ne worn ewly painted whee lrim, ha vethe
wheel bolt sornutsr etightene dafter appr ox‐
ima tely 620 mile s(1,000 km) to3,10 0m iles
(5,000 km).
% Ve
hicles with thet irep ressur emonitor
sy stem: all ins talled wheels mus tbeequip‐
ped wit hfunctioning sensors.
Mak esuretoo bservethef ollowing fur ther rela‐
te ds ubject:
R Notesont irep ressur e(/pag e246) Spar
ewheel Note
sont he eme rgency spar ewheel and
spar ewheel Spar
ewheel: wheel and tir edimension saswell
as thet ype of tir ecorrespond totheo ther ins tal‐
led wheels.
Emer gency spar ewheel: wheel and/or tire
dimension saswell asthet ype of tir earediffer‐
ent from thew heel tobe replaced. Alabel wit ha
speed limit can be found on thee mer gency spa re
wheel.
An ins talled emer gency spa rewheel or spare
wheel changes thed riving characteristic sand
bear srisks. &
WARNING Risk of accident caused by
incor rect wheel and tir edimensions
Whe nthe emergency spar ewheel or the
spar ewheel is ins talled, driving characteris‐
tic sm aybe se verely affected.
The reis an inc reased risk of an accident.
To prev ent hazardous situations: #
Oncet he spar ewheel or thee mer gency
spa rewheel has been ins talled, check
th et irep ressur eand adjus tifneces‐
sar y. #
The emer gency spa rewheel ma yonly
be used temp oraril yand mus tbe
re placed wit hastandar dwheel as soon
as possible. #
Neverins tall mor ethan one emergency
spar ewheel. #
When operating your vehicle wit hthe
emergency spar ewheel ins talled, adapt 268
Wheels and tires

yo
ur drivin gstyle acco rdingly and drive
carefully. #
Do no tswitc hoffESP ®
. #
Sno wchains mus tnotbe ins talled on
th ee mer gency spa rewheel. #
Replace thee mer gency spa rewheel
af te ram aximu mofs ixyears, rega rd‐
less of wear. R
When usin ganemergency spa rewheel
(whic hisd iffe re nt from thew heel tobe
re placed) atop speed of 50 mph(80 km/h)
mus tnotbe exc eeded.
R The tir epressur eoft he emergency spare
whee lmustbec heckedb efor estartin gaj our‐
ne y(/pag e250).
R Have thee mer gency spa rewheel replaced by
aq ualified specialis tworks hop. &
WARNING Risk of accident from dam‐
aged spa rewheel wit hSuper Sin glet ires
Ve hicles with Super Single tires
The tir eofthe spar ewheel exposed toabo ve-
ave rage loads af terb eing ins talled on ther ear
axle. If youe xceed them aximum speed or the
maximu mdista nce, or ins tallth es par ew heel
again, thet ireoft he spar ewheel ma ybe
damaged. The tir edamag emaynotbev isible
and no tdetectable.
Ad amaged tir emaycause alossoft irep res‐
sure. Thi scould cause youtol ose control of
th ev ehicle. #
Onlyusethes par ew heel if it has not
ye tb eeni nstalled on ther ear axle with
th ec urrent tires. #
Ifth es par ew heel had been ins talled on
th er ear axle, ha vethet ireoft he spare
wheel replaced af terc hanging the
wheel again, ir respectiv eofthe dis‐
ta nce. #
Fors afet yr easons, when changing atire
ensur ethat only thet irev alvetype
appr ovedfor thet ires is used. *
NO
TEDama getothet ransmission Ve
hicles with Super Single tires: whenyou
ins tallth es par ew heel on ther ear axle, the
transmission ma ybedamaged bythed iffe r‐
ent rotational speed softhe wheels. #
When thes par ew heel is ins talled on
th er ear axle, obser vethem aximum
speed of 34 mph(55 km/h) and the
maximu mdriving dis tance of 62 miles
(100 km). %
It is possible
,without restrictions, touse the
spar ewheel only on thef ront axle of avehi‐
cle wit hSuper Single tires.
The following should be checkedr egular ly,p artic‐
ularly prior tolong journe ys:
R The secur epositioning of thes par ew heel
R The tir epressur eoft he spar ewheel (adjust
th et irep ressur eifn ecessary) (/ page247)
R Thef astenings of thes par ew heel brac ket
Re place thet ires af ters ixyearsatt he latest,
re ga rdless of wear.T his also applies tothes pare
wheel.
% If
yo uh ave installed an emer gency spa re
wheel or spar ewheel, thet irep ressur emoni‐
to rw illn ot function fort his wheel.T he emer‐
ge ncy spa rewheel or spar ewheel is not
equipped wit hasensor form onitoring tire
pressu re. Installing/removing
thes pare wheel Ve
hicles with rear wheel drive: removing the
spar ewheel (Cargo Van/Passenger Van) Bolt co
vers fort he saf etyh ooks (exa mp le: Cargo
Va n) Wheel
sand tires 269