Mercury Sable 1996 Owner's Manuals

254 [AC01500(S )02/93]
thirty-six pica chart:BLANK
File:fcacs.ex
Update:Tue Aug 8 11:01:40 1995

255
Servicing Your Sable
%*
[SV00300(ALL)03/95]
Service Made Easy
*
[SV00400(ALL)01/95]
Ford has two goals for servicing your vehicle.
*
[SV00500(ALL)01/95]
1. When we can, we design parts that do not
need to be serviced.
*
[SV00600(ALL)01/95]
2. We want to make servicing your vehicle as
easy as possible. To help you:
*
[SV00700(ALL)01/95]
q
We highlight do-it-yourself items in yellow in
the engine compartment so that you can find
them easily.
*
[SV00800(ALL)01/95]
q
When possible, we design parts Ð such as
the headlamp bulbs Ð that can be replaced
without tools.
*
[SV00900(ALL)05/94]
q
We give you a Maintenance Schedule that
makes tracking routine service for your
vehicle easy. The maintenance schedule is
located in theMaintenance Schedule and Record
booklet.
*
[SV01000(ALL)01/95]
This chapter tells you about the basic parts that
you need to check and service regularly.
*
[SV01100(ALL)03/95]
If your vehicle needs professional servicing, see
theCustomer Assistancechapter.
*
[SV01200(ALL)03/95]
Check yourWarranty Information Bookletto find
out which parts are covered.
*
[SV01250(ALL)03/95]
Ford Motor Company recommends that you
perform the Owner Maintenance Checks listed in
theMaintenance Schedule and Recordbooklet.
These services are important for the proper
operation of your vehicle. In addition to the
conditions listed in the Owner Maintenance
File:fcsvs.ex
Update:Wed Dec 20 09:36:55 1995

256Checklist, be alert for any unusual noise,
vibration, or other indication that your vehicle
may need service. If you do notice something
unusual, see that your vehicle is serviced
promptly.
*
[SV01275(ALL)03/95]
Use only recommended fuels, lubricants, fluids,
and service parts conforming to specifications.
Motorcraft parts are designed and built to
provide the best performance in your vehicle.
Using these parts for replacement is your
assurance that Ford-built quality stays in your
vehicle.
*
[SV01300(ALL)04/95]
NOTE: Always dispose of used automotive
fluids in a responsible manner. Follow
your community's standards for
disposing of these types of fluids. Call
your local recycling center to find out
about recycling automotive fluids.
%
*
[SV01600(ALL)03/95]
Precautions When Servicing Your
Vehicle
*
[SV01700(ALL)01/95]
Be especially careful when inspecting or
servicing your vehicle. Here are some general
precautions for your safety:
%*
[SV01800(ALL)08/95]
q
Do not work on a hot engine. The engine
cooling fans may come on unexpectedly.
Always turn the engine off and let it cool.
*
[SV01850(ALL)08/95]
RWARNING
Your vehicle is equipped with two
automatic cooling fans. It may come
on at any time without warning. To
avoid injury, always disconnect the
negative terminal of the battery
before working near the fan.
File:fcsvs.ex
Update:Wed Dec 20 09:36:55 1995

257
*
[SV01900(ALL)03/95]
q
If you must work with the engine running,
avoid wearing loose clothing or jewelry that
could get caught in moving parts. Take
appropriate precautions with long hair.
*
[SV02000(ALL)01/95]
q
Do not work on a vehicle in an enclosed
space with the engine running, unless you are
sure you have enough ventilation.
*
[SV02100(ALL)01/95]
q
Never get under a vehicle while it is
supported by a jack only. If you must work
under a vehicle, use safety stands.
*
[SV02200(ALL)01/95]
q
Keep all lit cigarettes and other smoking
materials away from the battery and all
fuel-related parts.
*
[SV02250(ALL)03/95]
If you disconnect the battery, the engine must
ªrelearnº its idle conditions before your vehicle
will drive properly. To find out how the engine
does this, seeBatteryin this chapter.
*
[SV02550(ALL)03/95]
Working with the engine off:
*
[SV02600(ALL)03/95]
1. Set the parking brake fully and make sure
that the gearshift is securely latched in P
(Park).
*
[SV02625(ALL)03/95]
2. Remove the key from the ignition after you
turn the engine off.
*
[SV02650(ALL)03/95]
3. Block the wheels. This will prevent your
vehicle from moving unexpectedly.
*
[SV02700(ALL)03/95]
Working with the engine on:
*
[SV02800(ALL)03/95]
1. Set the parking brake fully and make sure
that the gearshift is securely latched in P
(Park).
*
[SV02825(ALL)03/95]
2. Block the wheels. This will prevent your
vehicle from moving unexpectedly.
File:fcsvs.ex
Update:Wed Dec 20 09:36:55 1995

258
*
[SV03000(ALL)02/95]
RWARNING
Do not start your engine with the air
cleaner removed and do not remove
it while the engine is running.
%*
[SV03100(ALL)03/95]
Opening the Hood
%*
[SV03200(ALL)01/95]
1. Inside the vehicle, pull the hood release
handle located under the bottom left corner
of the instrument panel.
%*
[SV03300(ALL)02/95]
2. Go to the front of the vehicle and release the
auxiliary latch that is located under the hood
at the center of the vehicle.
*
[SV03400(ALL)01/95]
3. Lift the hood until the lift cylinders hold it
open.
*
[SV03500(ALL)01/95]
Whenever you close the hood, latch it securely.
File:fcsvs.ex
Update:Wed Dec 20 09:36:55 1995

259 [SV03550(ALL)11/94]
full page art:0000689-E
The hood release, hood latch, and lift cylinder assembly
File:fcsvs.ex
Update:Wed Dec 20 09:36:55 1995

260
*
[SV04350(ALL)01/95]
NOTE: Read and understandPrecautions When
Servicing Your Vehicleat the beginning
of this chapter before opening the
hood.
%
*
[SV04500(ALL)04/95]
Engine Compartment
*
[SV04600(ALL)09/93]
Your vehicle has one of these types of engines:
[SV04700(ALL)08/95]
q
a 3.0L Vulcan engine
[SV04750(ALL)08/95]
q
a 3.0L Duratec engine
*
[SV04850(ALL)11/94]
The following pages show diagrams of each
engine type and where to find items that you
should regularly service.
File:fcsvs.ex
Update:Wed Dec 20 09:36:55 1995

261 [SV05000(ALL)02/95]
full page art:0000299-H
The 3.0 liter Vulcan engine
File:fcsvs.ex
Update:Wed Dec 20 09:36:55 1995

262 [SV05025(ALL)02/95]
full page art:0000301-HThe 3.0 liter Duratec engine
File:fcsvs.ex
Update:Wed Dec 20 09:36:55 1995

263 %
*
[SV05075(ALL)04/95]
Cleaning the Engine
*
[SV06000(ALL)04/95]
A clean engine is more efficient because the
engine is able to cool properly. A build up of
grease and dirt acts as an insulator, keeping the
engine warmer than normal.
*
[SV06020(ALL)04/95]
q
Extreme care must be used if a power washer
is used to clean the engine. The high pressure
fluid could penetrate sealed parts and
assemblies causing damage or malfunctions.
*
[SV06040(ALL)04/95]
q
In order to avoid possible cracking of the
engine block or fuel injection pump, do not
spray a hot engine or injection pump with
cold water.
*
[SV06060(ALL)04/95]
q
The alternator, distributor and air intake must
be covered. Covering these components will
help prevent water damage.
*
[SV06080(ALL)04/95]
q
Never wash or rinse the engine while it is
running. Water getting into the engine may
cause internal damage.
%
*
[SV06100(ALL)03/95]
Filling the Fuel Tank
[SV06800(ALL)04/95]
1. Turn the engine off. After opening the fuel
door, remove the cap carefully and slowly
by turning it counterclockwise 1/4 turn until
it stops. Pull to remove the cap. A tether
attaches the cap to the fuel filler pipe.
[SV06825(ALL)04/95]
one inch art:0001470-AFile:fcsvs.ex
Update:Wed Dec 20 09:36:55 1995