brake Mercury Villager 1996 Owner's Manuals

1
Introductory Information
[IN00900(ALL)04/94]
Using This Guide
[IN01200(ALL)05/95]
To fully appreciate all of the features and options of your new
vehicle, we recommend that you thoroughly read through this
guide now and refer back to it when you have specific needs or
questions. For your own safety and the safety of your
passengers, it is important that you completely understandall
performance and care proceduresbeforeoperating this vehicle.
For example, without reading further, would you know:
[IN01300(ALL)02/95]
n
What to do if you get a flat tire? (Refer toFlat tirein the
Index)
[IN01400(ALL)02/95]
n
What it means if the O/D OFF light is illuminated on your
instrument panel? (Refer toOverdrivein the Index)
[IN01500(ALL)01/93]
n
How to engage the childproof safety lock on the sliding
door? (Refer toChildproof lockin the Index)
[IN01600(ALL)07/95]
n
That your automatic transaxle will not shift out of PARK (P)
until you depress the brake pedal? (Refer toGearshiftin the
Index)
*
[IN01605(ALL)04/95]
Ford's Commitment to You
*
[IN01610(ALL)10/95]
At Ford Motor Company, excellence is the continuous
commitment to achieve the best result possible. It is dedication
to learning what you want, determination to develop the right
concept, and execution of that concept with care, precision, and
attention to detail. In short, excellence means being the standard
by which others are judged.
*
[IN01615(ALL)04/95]
Our Guiding Principles
*
[IN01620(ALL)04/95]
n
Quality comes first.For your satisfaction, the quality of our
products and services must be our number one priority.
*
[IN01625(ALL)04/95]
n
You are the focus of everything we do.Our work must be
done with you in mind, providing better products and
services than our competition.
File:02vxinn.ex
Update:Mon Jun 3 08:15:32 1996

Introductory Information
5
[IN04575(ALL)05/96]
When you purchase Ford ESP, you receive peace-of-mind
protection throughout the United States and Canada, provided
by a network of more than 5,100 participating Ford Motor
Company dealers.
[IN04600(ALL)05/96]
NOTE: Repairs performed outside the United States and
Canada are not eligible for ESP coverage.
[IN04700(ALL)05/96]
This information is subject to change. Ask your dealer for
complete details about Ford ESP coverage.
[IN05500(ALL)01/93]
Break-In Period for Your Villager
[IN05600(ALL)02/95]
Your new vehicle will go through an adjustment or break-in
period during the first 1,000 miles (1,600 km) of driving. During
the break-in period, you need to pay careful attention to how
you drive your vehicle.
[IN05700(ALL)01/93]
n
Change your speed often as you drive.Do not drive at one
speed for a long time.
%*
[IN05800(ALL)01/95]
n
Use only the type of engine oil that Ford recommends.See
Engine oil recommendationsin the Index. Do not use special
ªbreak-inº oils.
%*
[IN05900(ALL)01/95]
n
Avoid sudden stops.Because your vehicle has new brake
linings, you should take these steps:
*
[IN06000(ALL)01/95]
Ð Watch traffic carefully so that you can anticipate when to stop.
*
[IN06100(ALL)01/95]
Ð Begin braking well in advance.
*
[IN06200(ALL)01/95]
Ð Apply the brakes gradually.
[IN06300(ALL)05/93]
The break-in period for new brake linings lasts for 100 miles
(160 km) of city driving or 1,000 miles (1,600 km) of highway
driving.
File:02vxinn.ex
Update:Mon Jun 3 08:15:32 1996

Safety Restraints
11
%*
[SR10000(ALL)05/95]
Combination Lap and Shoulder Belts
[SR10050(ALL)06/95]
While your vehicle is in motion, the combination lap and
shoulder belt adjusts to your movement. However, if you brake
hard, turn hard, or if your vehicle receives an impact of 5 mph
(8 km/h) or more, the lap and shoulder belt locks and helps to
reduce your forward movement.
*
[SR10200(ALL)05/95]
After you get into your vehicle, close the door and lock it. Then
adjust the seat to the position that suits you best.
[SR10400(ALL)06/95]
To fasten the belt, pull the combination lap and shoulder belt
from the retractor so that the shoulder portion of the belt
crosses your shoulder and chest. Be sure the belt is not twisted.
If it is, remove the twist. Insert the belt tongue into the proper
buckle until you hear a snap and feel it latch. Make sure the
tongue is securely fastened to the buckle by pulling on tongue.
[SR10420(ALL)06/95]
10-1/2 pica
art:0040315-A
Fastening the front seat combination lap and shoulder belt
[SR10430(ALL)09/95]
NOTE: Be sure to read and understandImportant Safety Belt
Informationat the beginning of this chapter.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

58
[ST03200(ALL)01/93]
ACCESSORY allows you to operate some of your vehicle's
electrical accessories while the engine is not running. For
example, you can use ACCESSORY to turn on the radio,
windshield wipers, or operate the cigarette lighter without
starting the engine.
%*
[ST03300(ALL)03/95]
Ignition Key Chime
[ST03400(ALL)02/95]
The chime will sound if you open the driver's door while the
key is in the ignition. Never leave your vehicle unattended with
the key in the ignition.
%*
[ST03500(ALL)02/95]
Removing the Key From the Ignition
[ST03600(ALL)06/95]
OFF/LOCK is the only position that allows you to remove the
key from the ignition. The LOCK feature helps to protect your
vehicle from theft, because it also locks the steering wheel and
the gearshift lever when the key is removed.
%*
[ST03700(ALL)01/93]
If your key is stuck in the LOCK position, and you are unable
to turn it, move your steering wheel left or right until the key
turns freely.
*
[ST03800(ALL)01/93]
To remove your key from the ignition:
*
[ST03900(ALL)05/95]1.
Put the gearshift lever in P (Park).
*
[ST04000(ALL)02/95]2.
Set the parking brake fully.
*
[ST04100(ALL)03/95]3.
Turn the ignition key to LOCK.
*
[ST04200(ALL)03/95]4.
Remove the key.
*
[ST04300(ALL)06/95]
RWARNING
When you leave your vehicle, place the gearshift lever in
P (Park). Set the parking brake fully, and shut off the
engine. Never park your vehicle in N (Neutral). If you do
not take these precautions, your vehicle may move
suddenly and injure someone.
File:04vxstn.ex
Update:Mon Jun 3 08:20:06 1996

60
*
[ST05200(ALL)03/95]3.
Make sure that the gearshift is in P (Park) and the parking
brake is set before you turn the key.
[ST05400(ALL)04/95]4.
Test the warning lights on the instrument cluster to make
sure they work. Refer to theWarning Lights and Gauges
chapter.
*
[ST05700(ALL)02/95]
Starting Your Engine
*
[ST05800(ALL)02/95]
To start your engine:
*
[ST05900(ALL)05/95]1.
Follow the steps underPreparing to Start Your Vehicleat the
beginning of this section.
*
[ST06000(ALL)01/93]2.
Keep your foot on the brake pedal and turn the ignition key
to ON.
*
[ST06100(ALL)03/95]3.
DO NOT depress the accelerator pedal when starting your
engine. DO NOT use the accelerator while the vehicle is
parked.
*
[ST06200(ALL)02/95]4.
Turn the key to the START position (cranking) until the
engine starts. Allow the key to return to the ON position
after the engine has started.
*
[ST06300(ALL)02/95]
If you have difficulty in turning the key, rotate the steering
wheel slightly because it may be binding.
*
[ST06900(ALL)04/94]
For a cold engine:
*
[ST07000(ALL)06/95]
n
At temperatures10ÊF (-12ÊC) andbelow:If the engine does
not start infifteen (15) secondson the first try, turn the key
to OFF, wait approximately ten (10) seconds so you do not
flood the engine, then try again.
*
[ST07100(ALL)04/95]
n
At temperaturesabove10ÊF(-12ÊC):If the engine does not
start infive (5) secondson the first try, turn the key to OFF,
wait approximately ten (10) seconds so you do not flood the
engine, then try again.
File:04vxstn.ex
Update:Mon Jun 3 08:20:06 1996

Starting Your Villager
61
*
[ST07200(ALL)04/94]
For a warm engine:
*
[ST07300(ALL)04/95]
n
Do not hold the key in the START position for more than
five (5) secondsat a time. If the engine does not start within
five (5) seconds on the first try, turn the key to the OFF
position. Wait a few seconds after the starter stops, then try
again.
*
[ST07350(ALL)05/95]
Whenever you start your vehicle, release the key as soon as the
engine starts. Excessive cranking could damage the starter or
flood the engine.
*
[ST07360(ALL)02/95]
After you start the engine, let it idle for a few seconds.Keep
your foot on the brake pedaland release the parking brake.
Put the gearshift lever in gear, slowly release the brake pedal
and drive away in the normal manner.
*
[ST07370(ALL)02/95]
NOTE: Your vehicle has an interlock that prevents you from
shifting out of Park (P) unless your foot is on the
brake pedal.
%*
[ST07500(ALL)04/95]
If the engine does not start after two attempts:
*
[ST07600(ALL)04/95]1.
Turn the ignition key to the OFF position.
*
[ST07700(ALL)04/95]2.
Press the accelerator all the way to the floor and hold it.
*
[ST07800(ALL)04/95]3.
Turn the ignition key to the START position.
*
[ST07900(ALL)04/95]4.
Release the ignition key when the engine starts.
*
[ST08000(ALL)04/95]5.
Release the accelerator gradually as the engine speeds up.
Then drive away in the normal manner.
*
[ST08100(ALL)04/95]
If the engine still does not start, the fuel pump shut-off switch
may have been triggered. For directions on how to reset the
switch seeFuel Pump Shut-Off Switchlater in this chapter.
File:04vxstn.ex
Update:Mon Jun 3 08:20:06 1996

Warning Lights and Gauges
69
[LG00800(ALL)01/93]
The following warning lights and gauges are on the mechanical
cluster. All of the warning lights and gauges alert you to
possible problems with your vehicle. Some of the lights listed
are optional. The following section explains what each of these
indicators means.
*
[LG00850(ALL)01/95]
Indicator Lights and Chimes
*
[LG00900(ALL)06/95]
Brake System Warning Light
*
[LG01000(ALL)03/95]
The warning light for the brakes can show two things Ð that
the parking brake is not fully released, or that the brake fluid
level is low in the master cylinder reservoir. If the fluid level is
low, the brake system should be checked by your dealer or a
qualified service technician.
[LG01100(ALL)09/93]
6 pica art:0040050-A
Brake system and parking brake light
[LG01200(ALL)01/93]
The BRAKE light normally comes on when you turn the
ignition key to the ON position to verify that the indicator bulb
is working. If the light stays on or comes on when the engine is
running and after you have released the parking brake fully,
have the hydraulic brake system serviced.
*
[LG01300(ALL)05/95]
RWARNING
The BRAKE light indicates that the brakes may not be
working properly. Have the brakes checked immediately.
File:05vxlgn.ex
Update:Tue Jun 4 11:35:19 1996

70
%*
[LG01400(ALL)02/95]
Anti-Lock Brake System Warning Light (If Equipped)
*
[LG01500(ALL)12/93]
To check the anti-lock brake warning light, turn the ignition key
to the ON position. The ABS warning light should glow
momentarily.
*
[LG01600(ALL)10/93]
NOTE: If it does not glow at all or stays on for a long time,
have your vehicle's electrical system checked
immediately.
[LG01700(ALL)02/94]
6 pica art:0040051-B
Anti-lock brake system warning light
*
[LG01800(ALL)05/95]
RWARNING
If the anti-lock brake system warning light remains on or
comes on while driving, have the braking system checked
by a qualified service technician as soon as possible.
*
[LG01810(ALL)06/95]
NOTE: If a fault occurs in the anti-lock system, and the brake
warning light is not lit, the anti-lock system is
disabled but normal brake function remains
operational.
%*
[LG01900(ALL)05/95]
Safety Belt Warning Light and Chime
[LG02005(ALL)02/95]
This warning light and chime remind you to fasten your safety
belt.
[LG02010(ALL)04/95]
n
If the safety belt is not buckled when the ignition is turned
to the ON position, the chime will turn on for four (4) to
eight (8) seconds and the light will remain on continuously,
or until the safety belt is fastened.
File:05vxlgn.ex
Update:Tue Jun 4 11:35:19 1996

112
[IP11000(ALL)04/95]
To activate the rear washer, press the RR WASH switch. For a
constant spray, hold the switch for a few seconds. For less
washer fluid, press the switch once and release it. When you
activate the washer, the wiper will cycle twice and then stop.
*
[IP11050(ALL)04/95]
Do not activate the washer for longer than fifteen seconds
continuously. This could damage the washer pump system.
*
[IP11100(ALL)04/95]
Hazard Flasher Switch
*
[IP11150(ALL)04/95]
The hazard flasher is used to alert other drivers to hazardous
situations.
*
[IP11200(ALL)09/93]
The hazard flasher switch operates the same lamps as the turn
signal lever. When the hazard flasher is activated, all of these
lamps will flash on and off. The turn signal indicators cannot be
used when the hazard lamps are flashing. Operation of the
hazard flashers does not affect operation of the brakelamps.
*
[IP11300(ALL)12/93]
The flashers work even with the key out of the ignition. The
flashers will work for up to two hours when the battery is fully
charged and in good condition. They will not drain the battery
excessively. If the flashers run for longer than two hours or if
your battery is not fully charged, your battery may be drained
to the point where the vehicle will not start.
[IP11400(ALL)01/93]
The hazard flasher switch is located on the instrument panel to
the right of the instrument cluster.
*
[IP11500(ALL)09/93]
To use the hazard flasher:
*
[IP11600(ALL)02/94]1.
Push the HAZARD switch; you will see the turn signal
arrows flash.
*
[IP11700(ALL)09/93]2.
To stop the hazard flashers, push the HAZARD switch again.
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996

114
[IP12500(ALL)09/93]
13-1/2 pica art:0040074-E
The headlamp control knob
[IP12600(ALL)01/93]
A chime will sound if any of the exterior lamps are on when
the driver's door is opened.
%*
[IP12625(ALL)05/95]
Cleaning the Exterior Lamps
*
[IP12650(ALL)05/95]
Do not use dry paper towel, chemical solvents or abrasive
cleaners to clean the lamps, as these may cause scratches or
crack the lamps.
%*
[IP12700(ALL)01/93]
Daytime Running Light (DRL) System
(Canadian vehicles only)
*
[IP12800(ALL)03/95]
The Daytime Running Light (DRL) system turns the high beam
headlamps on, with a reduced light output, when:
*
[IP12900(ALL)01/93]
n
the vehicle is ªrunningº
*
[IP13000(ALL)01/93]
n
the vehicle has a fully released parking brake
*
[IP13100(ALL)01/93]
n
the headlamp system is in the OFF position
*
[IP13200(ALL)01/93]
NOTE: You may notice that the lights flicker when the engine
is turned on or off. This is a normal condition.
File:06vxipn.ex
Update:Mon Jun 3 14:33:05 1996