ad blue MITSUBISHI 3000GT 1991 Owner's Manual

LSUPPLEMENTAL RESTRAINT SYSTEM (SRS)
- Troub!eshooting 529-29
/ CONTINUED FROM PREVIOUS PAGE/*
(1)Connect the red 2-pin connector @ of the SRS CheckHarness to the SDU in place of the now-disconnected clock spring-SDU connector.
NOTEA 3-ohm resistor that corresponds to the resistance
of the air bag module (squib) and the wiring resis-
tance is connected between the terminals of the
connector
@ of the SRS Check Harness.
(2)Reconnect blue.and yellow connectors, for the wiring
leading to the front impact sensors, to the SDU anddouble lock them. (Refer to
P.52B-9.)
NOTEIf double locking cannot be made, the connector isincorrectly or incompletely inserted; re-check to
insert the connector correctly and securely.
”
CONTINUED ON NEXT PAGEIMB991 349
SRS Check Harness
SRS CheckHarness
\ ii%\19FOO93NOTE
- IMPORTANT
(I) After repairing the SRS, reconnect the battery cable, erase the diagnosis code memory from theMulti-use Tester and check the SRS warning light operation to verify the system functions
properly. (Refer to TEST 1.)
(2) SDU
= SRS Diagnosis Unit
i
TSB Revision