child restraint MITSUBISHI ECLIPSE 1990 Service Manual

BODY - Main Bodv23-9
No.Part name
1Front door beltline reinforcement,
outer
2Front door, outer, rear3Front door, inner, rear4 Front fender bracket
5 Roof drip channel
6Rear wheelhouse front extension7Roof drip channel extension8 Rear pillar, outer
9Fuel filler neck bracket10 Rear lamp housing extension
11Quarter outer lower extension
12 Fuel filler door panel
13 Front upper frame extension, inner
14 Dash panel crossmember
15 Dash panel extension
16 Front floor side sill, inner, front
17 Dash panel
18 Front floor sidemember
19 Front floor side sill, inner
20 Rear seat crossmember
21 Rear seat pan
22 Rear end crossmember
23 Child restraint reinforcement
24 Rear fascia upper bracket
25 Rear end panel, outer
26 Oil cooler bracket
27 Headlamp support panel
28 Sidemember to crossmember brace
29 Fender support plate
30 Turn lamp bracket
31Front end upper bar32Front end upper bar reinforcement33 Front upper frame, outer
34 Front upper frame, lower
35 Front upper frame, inner
36 Shield plate
37 Rear floor side sill reinforcementMaterial
No.Part name
44 Front door panel, inner
45 Roof panel (for sun roof)
46 Hood panel, inner
47 Front fender panel
48 Tailgate panel, outer. upper
49 Tailgate panel, inner
50 Front floor side sill. outer
51 Quarter panel, inner, lower
52 Rear wheelhouse, inner
53 Quarter panel, outer
54 Rear lamp housing
55 Cowl top panel, outer
56 Cowl top panel, inner
57 Front floor pan
58 Rear end panel, inner
59 Front fender shield
60 Rear floor side sill
SGACC61 Spring house panel
62 Center pillar, outer
63 Backbone rear reinforcement
64 Propeller shaft rear bracket
65 Rear floor crossmember. lower
66 Rear floor pan
67 Strut house panel
68 Rear floor sidemember front
extension
69 Rear floor sidemember
70 Differential mount bulkhead
7 1 Front sidemember. rear
72 Rear floor sidemember reinforcement
38 Radiator bracket
39 Front tie down bracket, inner
40 Rear tie down reinforcement
41
’ Rear floor seat belt reinforcement42Rear floor sidemember front bulkhead43Rear floor sidemember rear bulkhead
F
SGAHC73 Front door panel, outer
74 Hood panel, outer
75 Tailgate panel, outer, lower
76 Front pillar, inner, upper(B)
77 Front pillar, outer, upper
78 Front pillar, outer, lower
79 Front upper frame extension, outer
80 Sidemember seat belt reinforcement81Rear floor sidemember extension82 Bumper bracket
83 Front sidemember. inner
84 Front sidemember rear reinforcement
85 (Front pillar. inner, upper (A)86 Front pillar, inner, lower
87 Spare tire bracket
x::-SGAHC-I-Galvannealed steel plate
E% x--
SPHC. SPCD or SPCE plated with an electrical zinc-nickel alloy
SPRC: Phosphorus added
SENC35R: SPRC35R with electrogalvanized zink-nickel coating
SGAC35R: Phosporus added (also galvanneafed)The numbers in the material codes indicate the tensile strengthMaterial
SGACE
SENCE
SENHC
SENHE
AGSC35R
SENC35R
SPRC35

BODY - Seat Belts
._-- -
23-31
Shoulder beltI
Lapbelt
IGlove box pad toasty
Knee protector
Guide rail\Fasten switch
\
SEAT BELTSRZ3SBAS
On Federal and California vehicles automatic seat belts (Manualseat belts on vehicles for Canada) are installed on the front
seats and the
3-point seat belts with ELR on the rear seat, both
contributing to the enhanced safety and ease of use.
AUTOMATIC SEAT BELTS
GENERAL INFORMATION
The Automatic Seat Belts are designed to automatically fasten
themselves around the driver and front passenger as they get
into the vehicle and close the front door, thereby,
by a
combination of the lap belt, the knee protector, the corner pad
and the glove box pad (at the lower part of the instrument
panel), protecting them from second collisions during a
front-end crash or similar accident.
The lap belt for the driver’s seat is provided with the ELR
(ELR:Emergency Locking Retractor), and that for the front passen-
ger’s seat with the
ELR-ALR” to support the Child Restraint
System incorporated into the seat. (“ALR: Automatic Locking
Retractor) The buckle tilts toward front and inside helping the
belts be tight around the body.
The
tongue plate on the driver’s seat is provided with
energy-absorbing structure.
The automatic seat belts consist of a driving-device assembly,
shoulder belt, manual lap belt, knee protector, and other
components.
The driving-device assembly is composed of the slide anchor,
the release switch, the guide rail, the “fasten” switch, the
automatic seat belt motor relay, and the driving device.
There is an emergency-release button on the slide anchor; this
button can be used to release the shoulder belt in the event of
an emergency resulting from an accident, etc.
Release switchmergency
release button
Automatic seat
belt control unit
PI, Lap belt
Tongue plateDriving device
Automatic seat belt
motor relay