air suspension MITSUBISHI ENDEAVOR 2004 Service User Guide

Fig. 40: Aligning Mating Mark Of DOJ Inner Race

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
3. Tap the inner race with even force to press-fit into the bump of the shaft with
special tool MB990939.
>>C< Specified grease: Repair kit grease
Used amount: 90 +
/- 10
g (3.2 +
/- 0.3 oz)
CAUTION: The drive shaft joint use special grease. Do not mix
old and new or different types of grease.

2004 Mitsubishi Endeavor LS
2004 SUSPENSION Rear Axle < AWD > - Endeavor

Fig. 42: Positioning DOJ Outer Race

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
2. Remove part of the DOJ boot from the DOJ outer race to release the air
pressure inside the boot.
DIFFERENTIAL CARRIER ASSEMBLY REMOVAL AND INSTALLATION
2004 Mitsubishi Endeavor LS
2004 SUSPENSION Rear Axle < AWD > - Endeavor

Fig. 86: Staking Lock Pin With Punch

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
>>H<< DRIVE GEAR INSTALLATION 1. Clean the drive gear attaching bolts.
2. Remove the adhesive adhered to the threaded holes of the drive gear by turning
the tap (M 10 X 1.25). Clean the threaded holes by applying compressed air.
2004 Mitsubishi Endeavor LS
2004 SUSPENSION Rear Axle < AWD > - Endeavor