wheel torque MITSUBISHI GRANDIS 2008 Owner's Manual (in English)

For emergencies
6-25
6
12. Lower the vehicle slowly and then tighten the nuts in the
order shown in the illustration until each nut has been
tightened to the torque listed here.
Tightening torque
88 to 108 Nm
(Achieved by applying a force of 350 to 420 N at the end
of the wheel nut wrench supplied with the vehicle)
13. Lower and remove the jack, then store the jack and chock.14. Wrap the removed wheel in the vinyl sheet and store it in
the luggage area.
Have your damaged tyre repaired as soon as possible.
NOTE●The vinyl sheet is stored under the third seat together
with the tools and jack. (Refer to “Tools and jack” on page
6-10.)
CAUTION
!●Never use your foot or a pipe extension for extra
force in the wheel nut wrench. If you do so, you will
tighten the nut too much.
WARNING
!●When storing the removed wheel, raise the left- and
right-hand parts of the third seat seatback and
stand the wheel upright.
If you leave the space configured as a luggage area
when storing the wheel, serious injuries could occur
in the event of a collision.
BK-XP08E1ENUK.en-uk.book Page 25 Monday, August 13, 2007 2:20 PM