service MITSUBISHI iMiEV 2012 1.G Owner's Manual

Features and controls
3-75
3
Electric motor unit warning light
N00573600029
This warning light will illuminate when there is a problem with
a high voltage component.
Refer to “Service precautions” on page 7-2.Power down warning light
N00573700020
If the warning light illuminates when the outside air tempera-
ture is very low, move the vehicle to a warmer location.
If the warning light illuminates after the vehicle has been
driven continuously uphill or when the outside air temperature
is very high, stop the vehicle in a safe place so the electric
motor unit and/or the main drive lithium-ion battery can cool
down. When they have cooled down, the warning light will go
off. If the warning light does not turn off, contact a certified i-
MiEV dealer.NOTE
When the power down warning light illuminates, avoid
rapid starts and aggressive acceleration.

Illumination of the power down warning light does not
indicate a malfunction.

If the power down warning light illuminates while the air
conditioning is used, the cooling or heating may stop
operating and only the fan will operate.
CAUTION
!
If this light illuminates while driving, immediately
park your vehicle in a safe place and contact a certi-
fied i-MiEV dealer.
If this warning light illuminates, the power pro-
vided by the electric motor will be reduced and the
vehicle will be only able to move at low speeds.
This warning light will illuminate;

When the energy level in the main drive lith-
ium-ion battery is near empty.

When temperature of the electric motor unit
or the main drive lithium-ion battery is too
high or too low.

When voltage of the main drive lithium-ion
battery becomes low.
If the energy level gauge shows 0 bar, the main
drive lithium-ion battery is near empty and must
be charged as soon as possible. Refer to “Charg-
ing” on page 1-15.
BK0140800US.book 75 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Features and controls
3-91
3 Bluetooth
® 2.0 interface
(if so equipped)
N00563900087
The Bluetooth
® 2.0 interface allows for making/receiving
hands-free calls in the vehicle using a Bluetooth
® compatible
cellular phone based on the wireless communication technol-
ogy commonly known as Bluetooth
®. It also allows the user to
play music, saved in a Bluetooth
® music player, from the vehi-
cle’s speakers.
The system is equipped with a voice recognition function,
which allows you to make hands-free calls by simple switch
operations and voice command operations using a defined
voice tree.
The Bluetooth
® 2.0 interface can be used when the electric
motor switch is in the “ON” or “ACC” position.
Before you can use the Bluetooth
® 2.0 interface, you must pair
the Bluetooth
® device and Bluetooth
® 2.0 interface. Refer to
“Connecting the Bluetooth
® 2.0 interface and Bluetooth
®
device” on page 3-98.
Bluetooth
® is a registered trademark of BLUETOOTH SIG,
INC.
NOTE
If the electric motor switch is left in the “ACC” position,
the accessory power will automatically turn off after a cer-
tain period of time and you will no longer be able to use
the Bluetooth
® 2.0 interface. The accessory power comes
on again if the electric motor switch is turned from the
“ACC” position. Refer to “ACC power auto-cutout func-
tion” on page 3-30.

The Bluetooth® 2.0 interface cannot be used if the
Bluetooth
® device has a dead battery or the device power
is turned off.

Hands-free calls will not be possible if your phone does
not have service available.

If you place the Bluetooth
® device in the luggage com-
partment, you may not be able to use the Bluetooth
® 2.0
interface.
WA R N I N G
!
Although the Bluetooth
® 2.0 interface allows you to
make hands-free calls, if you choose to use the cellu-
lar phone while driving, you must not allow yourself
to be distracted from the safe operation of your vehi-
cle. Anything, including cellular phone usage, that
distracts you from the safe operation of your vehicle
increases your risk of an accident.

Refer to and comply with all state and local laws in
your area regarding cellular phone usage while driv-
ing.
BK0140800US.book 91 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Features and controls
3-93
3
Volume up buttonPress this button to increase the volume. Volume down buttonPress this button to decrease the volume.SPEECH button
Press this button to change to voice recognition mode.
While the system is in voice recognition mode, “Listen-
ing” will appear on the audio display.

If you press the button briefly while in voice recognition
mode, it will interrupt prompting and allow voice com-
mand input.
Pressing the button longer will deactivate the voice recog-
nition mode.

Pressing this button briefly during a call will enable voice
recognition and allow voice command input.PICK-UP button
Press this button when an incoming call is received to
answer the telephone.

When another call is received during a call, press this but-
ton to put the first caller on hold and talk to the new caller.
• In such circumstances, you can press the button briefly
to switch between callers. You will switch to the first
caller and the other caller will be put on hold.
• To establish a three-way call in such situations, press the
SPEECH button to enter voice recognition mode and
then say “Join calls.”
HANG-UP button
Press this button when an incoming call is received to
refuse the call.

Press this button during a call to end the current call.
When another call is on hold, you will switch to that call.

If this button is pressed in the voice recognition mode, the
voice recognition mode will be deactivated.NOTE
When you press the SPEECH button to enter voice recog-
nition mode with a cellular phone paired to the system,
current information on the cellular phone, such as
“remaining battery life,” “signal strength” or “roaming,”
will be displayed on the audio display.*
*: Some cellular phones will not send this information to
the Bluetooth
® 2.0 interface.

Call waiting and three-way calls can be used by the
Bluetooth
® 2.0 interface, only if it is possible to use those
services with your cellular phone.
BK0140800US.book 93 ページ ２０１１年９月２９日　木曜日　午後３時２８分

4-8 Driving safety
4Braking
N00629500518
All the parts of the brake system are critical to safety. Have the
vehicle serviced by a certified i-MiEV dealer at regular inter-
vals according to the “WARRANTY AND MAINTENANCE
MANUAL”.When brakes are wetCheck the brake system while driving at a low speed immedi-
ately after starting, especially when the brakes are wet, to con-
firm they work normally.
A film of water can be formed on the brake discs and prevent
normal braking after driving in heavy rain or through large
puddles, or after the vehicle is washed. If this occurs, dry the
brakes out by driving slowly while lightly depressing the brake
pedal.When driving in cold weatherOn snowy roads, ice can form on the braking system, making
the brakes less effective. While driving in such conditions, pay
close attention to preceding and following vehicles and to the
condition of the road surface. From time to time, lightly
depress the brake pedal and check how effective the brakes are.When driving downhillIt is important to take advantage of the regenerative braking by
shifting to “B” (BRAKE) position while driving on steep
downhill roads in order to prevent the brakes from overheating.
Parking
N00629600317
Parking on a hillWhen parking on a hill, set the parking brake, and turn the
front wheels toward the curb on a downhill, or away from the
curb on an uphill.
If necessary, apply chocks to wheels.NOTE
On a slope, be sure to apply the parking brake before
moving the selector lever to the “P” (PARK) position. If
you move the selector lever to the “P” (PARK) position
before applying the parking brake, it may be difficult to
disengage the selector lever from the “P” (PARK) position
when next you drive the vehicle, requiring application of a
strong force to the selector lever to move from the “P”
(PARK) position.
BK0140800US.book 8 ページ ２０１１年９月２９日　木曜日　午後３時２８分

5-18 Comfort controls
5Air purifier
N00733800177
The air conditioning system is equipped with an air filter to
reduce pollen and dust entering the cabin.
The air filter’s ability to collect pollen and dust will be reduced
as it becomes dirty, so replace it periodically. For the mainte-
nance interval, refer to the “WARRANTY AND MAINTE-
NANCE MANUAL”.NOTE
Operation in certain conditions such as driving on a dusty
road or frequent use of the air conditioning can reduce the
service life of the filter. When you feel that the air flow is
lower than normal or when the windshield or windows
start to fog up easily, replace the air filter.
Contact a certified i-MiEV dealer for assistance.
Remote Climate Control
(if so equipped)
N00766600016
You can run the air conditioning in advance of using the vehi-
cle. For details, refer to “Remote Climate Control” on page 1-
59.
AM/FM electronically tuned radio with CD
player
(if so equipped)
N00734301062
The audio system can only be used when the electric motor
switch is in the “ON” or “ACC” position.NOTE
To listen to the audio system while the electric motor unit
is not running, turn the electric motor switch to the
“ACC” position.
If the electric motor switch is in the “ACC” position, the
accessory power will automatically turn off after a certain
period of time and you will no longer be able to use the
audio system. The accessory power comes on again if the
electric motor switch is turned from the “ACC” position.
Refer to “ACC power auto-cutout function” on page 3-30.

If a cellular phone is used inside the vehicle, it may create
noise in the audio equipment. This does not mean that
anything is wrong with your audio equipment. In such a
case, use the cellular phone at a place as far away as possi-
ble from the audio equipment.

If foreign objects or water get into the audio equipment, or
if smoke or a strange odor comes from it, immediately
turn off the audio system and have it checked at a certified
i-MiEV dealer. Never try to repair it yourself. Avoid using
the audio system until it is inspected by a qualified person.

If the audio system is damaged by foreign objects, water,
or fire, have the system checked at a certified i-MiEV
dealer.
BK0140800US.book 18 ページ ２０１１年９月２９日　木曜日　午後３時２８分

5-40 Comfort controls
5
Notes on CD-Rs/RWs
N00751900112

You may have trouble playing back some CD-R/RW discs
recorded on CD recorders (CD-R/RW drives), either due
to their recording characteristics or dirt, fingerprints,
scratches, etc. on the disc surface.

CD-R/RW discs are less resistant to high temperatures and
high humidity than ordinary music CDs and can therefore
be damaged and rendered unplayable if left inside your
vehicle for a long time.

Depending on the combination of the writing software,
the CD recorder (CD-R/RW drive), and the disc used to
create a CD-R/RW, the disc might not play successfully.

This player cannot play the CD-R/RW discs if the session
is not closed.

This player cannot play CD-R/RW discs which contain
data other than CD-DA or MP3 data (Video CD, etc.).

Be sure to observe the handling instructions for the CD-
R/RW disc.
Antenna
N00734200471
To removeTurn the pole (A) counterclockwise.To installScrew the pole (A) clockwise into the base (B) until it is
securely retained.NOTE
Be sure to remove the roof antenna in the following cases:
• When using an automatic car wash
• When covering your vehicle with a car cover
• When driving into a structure that has a low ceiling.
WA R N I N G
!
Operating the CD player in a manner other than
specifically instructed herein may result in hazard-
ous radiation exposure. Do not remove the cover
and attempt to repair the CD player by yourself.
There are no user serviceable parts inside. In case of
malfunction, contact a certified i-MiEV dealer.
BK0140800US.book 40 ページ ２０１１年９月２９日　木曜日　午後３時２８分

6-8 For emergencies
6
Tire repair kit storage
N00837700016
The tire repair kit is stowed under the rear seat cushion.
To remove
N00837800017
1. Pull forward the seat stoppers (A) under the rear seat
cushion (B).
2. Lift up the seat cushion and pull it forward to remove it.
1- Tire compressor
2- Tire repair set: Items #3-#9 shown above
3- Tire sealant bottle
4- Filler hose
5- Extension hose
(This hose is used by a service facility for removal of seal-
ant. It is not used in emergency puncture repair.)
6- Valve insert (spare)
7- Valve remover
8- Speed restriction sticker
9- Instruction manual for tire repair
BK0140800US.book 8 ページ ２０１１年９月２９日　木曜日　午後３時２８分

For emergencies
6-19
6
20. After driving for 10 minutes or 3 miles (5 km) again,
check the tire pressure using the air pressure gauge on the
compressor. (Refer to “Tire inflation pressures” on page
7-21.) If the tire pressure has apparently not dropped, the
emergency repair procedure is complete. Before driving,
make sure that the compressor is stowed and the seat
cushion is properly secured. You must still not exceed a
speed of 50 mph (80 km/h). Observe local speed limits.NOTE
If the tire pressure has dropped below the specified level
when you check it at the end of the repair procedure, do
not drive the vehicle any further. Contact a certified i-
MiEV dealer.

In cold conditions (when the ambient temperature is 32 °F
{0 °C} or lower), the time and driving distance necessary
until completion of the repair can become longer than in
warmer conditions, and the tire pressure may drop below
the specified level even after you have inflated the tire the
second time and subsequently driven the vehicle. If this
happens, inflate the tire to the specified pressure once
more, drive for about 10 minutes or 3 miles (5 km), then
check the tire pressure again. If the tire pressure has again
dropped below the specified level, stop driving the vehicle
and contact a certified i-MiEV dealer.

Please give the empty sealant bottle to a certified i-MiEV
dealer or dispose of the sealant bottle according to regula-
tions for the disposal of chemical waste.
To w i n g
N00837000859
If your vehicle needs to be towedIf you need to tow your vehicle, contact a certified i-MiEV
dealer or a commercial tow truck service.
Transport the vehicle on a flatbed truck or tow the vehicle
either with all wheels or the rear wheels (drive wheels) off the
ground.Flat bed type
Dolly type
Towing with rear wheels off the ground
BK0140800US.book 19 ページ ２０１１年９月２９日　木曜日　午後３時２８分

For emergencies
6-21
6
If a wheel gets stuck in a ditch, do not try to tow the vehicle.
Please contact a certified i-MiEV dealer or a commercial tow
truck service for assistance.
There may be local regulations concerning towing in your area.
Obey the regulations in the area where you are driving your
vehicle.Towing the vehicle by a tow truckTowing with rear wheels off the ground
Place the selector lever in the “N” (NEUTRAL) position. Turn
the electric motor switch to the “ACC” position and secure the
steering wheel in a straight-ahead position with a rope or tie-
down strap. Never place the electric motor switch in the
“LOCK” or “ON” position when towing.
WA R N I N G
!
Never get under your vehicle after it has been lifted
by a tow truck.
Never ride in a vehicle that is being towed.
CAUTION
!
If the transmission or the steering system has a
problem or damage, transport the vehicle on a flat-
bed truck or tow the vehicle with the all wheels off
the ground.
If the electric motor switch is in the “ON” position,
the Active Stability Control (ASC) system may oper-
ate, resulting in an accident. Make sure the electric
motor switch is in the “ACC” position before tow-
ing.
BK0140800US.book 21 ページ ２０１１年９月２９日　木曜日　午後３時２８分

6-22 For emergencies
6Operation under adverse driving conditions
N00837200747
If your vehicle becomes stuck in sand, mud or
snow If your vehicle becomes stuck in snow, sand, or mud, it can
often be moved by a rocking motion. Rock your vehicle back
and forth to free it.
Do not spin the wheels. Constant efforts to free a stuck vehicle
can cause transmission failure.
If your vehicle is still stuck after several rocking attempts, call
for a commercial tow truck service.
On wet roads
WA R N I N G
!
When trying to rock your vehicle out of a stuck posi-
tion, make sure that there are no people nearby. The
rocking motion can make your vehicle suddenly
lurch forward or backward, and injure any
bystanders.
CAUTION
!
Do not drive on a flooded road. If you drive on a
flooded road, not only the electric motor unit stops
but also a failure like electric leakage or short circuit
may occur.
If you inevitably had to run on a flooded road and
the vehicle was exposed to water, be sure to have
your vehicle inspected by a certified i-MiEV dealer.
When driving in rain, on water-covered roads, or
through a car wash, water could get into the brake
discs and make them fail temporarily. In such cases,
lightly press the brake pedal to see if they are work-
ing properly. If they are not, press the pedal lightly
several times while driving to dry the brake pads or
linings, then check them again.
When driving in rain, a layer of water may form
between the tires and the road surface (aquaplan-
ing). This loosens your tires’ grip on the road, mak-
ing it difficult to steer or brake properly. When
driving on a wet road:
• Drive your vehicle at a safe speed.
• Do not drive on worn tires.
• Always keep the tires at the correct inflation pres-
sures.
BK0140800US.book 22 ページ ２０１１年９月２９日　木曜日　午後３時２８分