door lock MITSUBISHI LANCER EVOLUTION X 2008 Workshop Manual

SPEAKER
CHASSIS ELECTRICAL54A-25
DOOR SPEAKER
NOTE: The parts with "*" are installed exclusively to
the vehicles with Rockford Fosgate
® premium sound
system.
For the front door speaker, two types of speakers, 16
cm paper cone speaker speakers> and PP (polypropylene) cone speaker
® premium sound system>, are
available. For the rear door speaker, two types of
speakers, 16 cm paper cone speaker 4 speakers, 6 speakers> and PP (polypropylene)
cone 2-way coaxial speaker -
ers (Rockford Fosgate® premium sound system)>,
are available. Compared to the paper cone speakers,
the PP (polypropylene) cone speakers can playback
crisper bass. The door opening of the vehicles with 9
speaker (Rockford Fosgate
® premium sound sys-
tem) is blocked by using the sheet metal cover and
the urethane integrated resin sheet (resin cover and
water proof film) to make the door into a speaker
box, thus improving the sound quality. As an advan
-
tage of the sheet metal cover, the rigidity of the areas
around the speaker has been increased, and the
higher sound pressure, suppression of high har
-
monic, and suppression of dumping are achieved to
improve sound quality.
The one-touch installable speaker (with 3 tabs, fixed
by rotating) has been adopted to improve service
-
ability.
AC608347
Front door speaker
Rear door speaker
Sheet metal
cover*
Resin cover*
Resin cover*
AB
Front door water
proof film
Rear door water
proof film
Urethane integrated
resin sheet*
Urethane integrated
resin sheet*
AC507245AB

52A-1
GROUP 52A
INTERIOR
CONTENTS
GENERAL DESCRIPTION. . . . . . . . .52A-2
SPECIAL TOOL . . . . . . . . . . . . . . . . .52A-2
INSTRUMENT PANEL ASSEMBLY*.52A-2
REMOVAL AND INSTALLATION . . . . . . . . 52A-2
GLOVE BOX . . . . . . . . . . . . . . . . . . .52A-5
REMOVAL AND INSTALLATION . . . . . . . . 52A-5
INSTRUMENT CENTER PANEL . . . .52A-6
REMOVAL AND INSTLLATION . . . . . . . . . 52A-6
INSTRUMENT LOWER PANEL. . . . .52A-7
REMOVAL AND INSTALLATION . . . . . . . . 52A-7
FLOOR CONSOLE ASSEMBLY . . . .52A-8
REMOVAL AND INSTALLATION . . . . . . . . 52A-8
TRIMS. . . . . . . . . . . . . . . . . . . . . . . . .52A-10
REMOVAL AND INSTALLATION . . . . . . . . 52A-10
DOOR TRIM . . . . . . . . . . . . . . . . . . . .52A-13
REMOVAL AND INSTALLATION . . . . . . . . 52A-13
HEADLINING . . . . . . . . . . . . . . . . . . .52A-15
REMOVAL AND INSTALLATION . . . . . . . . 52A-15
INSIDE REAR VIEW MIRROR . . . . . .52A-17
FRONT SEAT ASSEMBLY* . . . . . . . .52A-17
REMOVAL AND INSTALLATION . . . . . . . . 52A-17
INSPECTION. . . . . . . . . . . . . . . . . . . . . . . . 52A-19
DISASSEMBLY AND ASSEMBLY . . . . . . . 52A-21
REAR SEAT ASSEMBLY . . . . . . . . . .52A-23
REMOVAL AND INSTALLATION . . . . . . . . 52A-23
DISASSEMBLY AND ASSEMBLY . . . . . . . 52A-26
FRONT SEAT BELT* . . . . . . . . . . . . .52A-28
REMOVAL AND INSTALLATION . . . . . . . . 52A-28
INSPECTION. . . . . . . . . . . . . . . . . . . . . . . . 52A-29
REAR SEAT BELT . . . . . . . . . . . . . . .52A-31
REMOVAL AND INSTALLATION . . . . . . . . 52A-31
WARNINGS REGARDING SERVICING OF SUPPLEMENTAL RESTRAINT SYSTEM (SRS) EQUIPPED VEHICLES
WARNING
•Improper service or maintenance of an y component of the SRS, or any SRS-related component, can lead to
personal injury or death to service personnel (from inadvertent firing of the air bag) or to the driver and
passenger (from renderin g the SRS inoperative).
•Service or maintenance of any SRS component or SRS-related component must be performed only at an
authorized MITSUBISHI dealer.
•MITSUBISHI dealer personnel must thoroughly review this manual, and especially its GROUP 52B - Supplemental
Restraint System (SRS) before beginning any service or maintenance of any component of the SRS or any
SRS-related component.
NOTE
The SRS includes the following components: SRS air bag control unit, SRS warning light, front impact sensors, driver’s and
passenger’s (front) air bag modules, knee air bag module, side-airbag module, curtain air bag module, side impact sensors,
seat belt pre-tensioners, clock spring, and interconnecting wiring. Other SRS-related components (that may have to be
removed/installed in connection with SRS service or maintenance) are indicated in the table of contents by an asterisk (*).