clutch MITSUBISHI MONTERO 1998 Manual Online
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 1998, Model line: MONTERO, Model: MITSUBISHI MONTERO 1998Pages: 1501, PDF Size: 25.81 MB
Page 1410 of 1501

Defective clutch master Replace master cylinder
Defective clutch slave Replace slave cylinder
Air in hydraulic system Bleed hydraulic system
\
\
\
\
\
\
\
Rattling Weak or broken release Replace spring and
lever spring check alignment
Damaged pressure plate Replace pressure plate
Broken clutch return spring Replace return spring
Worn splines on clutch disc Replace clutch disc
or input shaft and/or input shaft
Worn clutch release bearing Replace release bearing
Dry or worn pilot bearing Lubricate or replace
pilot bearing
Unequal release lever Align or replace
contact release lever
Incorrect pedal free play Adjust free play
Warped or damaged clutch Replace damaged
disc components
\
\
\
\
\
\
\
Slipping Pressure springs worn or Release pressure plate
Oily, greasy or worn Clean or replace clutch
facings disc
Incorrect clutch alignment Realign clutch assembly
Warped clutch disc or Replace damaged
pressure plate components
Binding release levers or Lubricate and/or
clutch pedal replace release
components
\
\
\
\
\
\
\
Squeaking Worn or damaged release Replace release bearing
Dry or worn pilot or Lubricate or replace
release bearing assembly
Pilot bearing turning in Replace pilot bearing
crankshaft and/or crankshaft
Worn input shaft bearing Replace bearing and
seal
Incorrect transmission Realign transmission
alignment
Dry release fork between Lubricate release fork
pivot and pivot
\
\
\
\
\
\
\
Heavy and/or Sticking release bearing Replace release bearing
Stiff Pedal sleeve and/or sleeve
Page 1411 of 1501

Dry or binding clutch Lubricate and align
pedal hub components
Floor mat interference Lay mat flat in proper
with pedal area
Dry or binding ball/fork Lubricate and align
pivots components
Faulty clutch cable Replace clutch cable
\
\
\
\
\
\
\
Noisy Clutch Faulty interlock switch Replace interlock
Pedal switch
Self-adjuster ratchet Lubricate or replace
noise self-adjuster
Speed control interlock Lubricate or replace
switch interlock switch
\
\
\
\
\
\
\
Clutch Pedal Binding clutch cable See CLUTCH article
Sticks Down
Springs weak in pressure Replace pressure plate
plate
Binding in clutch linkage Lubricate and free
linkage
\
\
\
\
\
\
\
Noisy Dry release bearing Lubricate or replace
release bearing
Dry or worn pilot bearing Lubricate or replace
bearing
Worn input shaft bearing Replace bearing
\
\
\
\
\
\
\
Transmission Weak springs in pressure Replace pressure plate
Click plate
Release fork loose on ball Replace release fork
stud and/or ball stud
Oil on clutch disc damper Replace clutch disc
Broken spring in slave Replace slave cylinder
cylinder
\
\
\
\
\
\
\
DRIVE AXLE - NOISE DIAGNOSIS
Unrelated Noises
Some driveline trouble symptoms are also common to the
engine, transmission, wheel bearings, tires, and other parts of the
vehicle. Ensure cause of trouble actually is in the drive axle before
adjusting, repairing, or replacing any of its parts.
Non-Drive Axle Noises
A few conditions can sound just like drive axle noise and
have to be considered in pre-diagnosis. The 4 most common noises are
exhaust, tires, CV/universal joints and wheel trim rings.